Merry Products MPG-OT01 KIT User manual

MPG-OT01 KIT
ADIRONDACK CHAIR FOOTSTOOL
P R O D U C T
R R YE
S
M

Ver3.0
PARTS
STEP 1
Read through these instructions thoroughly before
beginning assembly. We have found this to be of
great value when first assembling this product.
STEP 2
Remove and identify all parts and hardware from
packing material. Wooden pieces should be placed
on a non-abrasive surface (like the carton or carpet)
to prevent damage to the finish.
TOOLS REQUIRED
Phillips
Wrench
Ottoman Legs
Identify all parts using diagram below
Ottoman Base
Slats (A1)x2 Slats (A2)x8
(B)x2
(C1,C2)x2
C1
C2
b Large Screw 20pcs + 2 spare
c Small Screw 4pcs + 1 spare
a Bolt & Nut 4 pcs + 1 spare

Ver 3.0
STEP 4
Using the bolts & nuts (a), attach the ottoman
legs(C1,C2) to the ottoman base as shown below .
STEP 5
figure 1
STEP 3
Insert Screws b partially through A2 Slats
as shown in figure 1.
Position Screw ends on pre-marked center
points on Ottoman Base (B) and insert the rest
of the screw.
C2
C1
B
B
A1
A2
Insert Screws b and c partially through
A1 Slats as shown in Figure 1.
Position screw ends over pre-drilled
holes on Ottoman Base (B) and insert the rest
of the screw. c
c
b
b
b
a