critter sitters 986PK0101-NWG User manual

986PK0101-NWG







CLEANING AND MAINTENANCE
Note: The service life of the product may be substantially reduced if it is permanently exposed to
the weather.
-Hazard - Check the product regularly for damage and dispose of it if necessary.
oCheck all nuts and bolts for tightness and tighten when required
oOil all metallic moving parts
oCheck all coverings for bolts and sharp edges and replace when required
oCheck metal parts for rust. Replace if needed
oReplace any defective or missing parts
- If the above checks are not carried out, the product could break, overturn or otherwise
become a hazard.
- Clean regularly and treat with conventional care products once or twice a year.
Storage
- Always store in a dry, well-ventilated place. Keep the product away from moisture.
WARNING!
For domestic use only. Not for use in a commercial setting.
Please place the playground equipment on a flat surface at a distance of at least 6 feet
from other things such as: fences, garage, playsets, building structures (garage, shed,
house), overhanging branches, clotheslines or electric cables.
This playground equipment may not be placed on asphalt, concrete or other hard
surfaces.
WARNING! May only be used under the supervision of an adult.
- This product is to be assembled by an adult and checked before each use.
- Minimum age: 36 months - this item is not suitable for children under 36 months
of age. Risk of suffocation or choking caused by small parts that may be
swallowed!
- Never leave child unattended when using this product.
- Incorrect installation can be dangerous. To prevent serious injury or death, securely
install all of the components and only use according to the assembly instructions.
- Do not use the product if any components are damaged or missing. Before using the
product, carefully inspect for any loose components and carefully tighten any parts
that are loose.
- Make sure that the product is always on a flat surface. Improper installation can
result in serious injury due to tipping or falling.
oTo check all nuts and bolts for tightness and tighten when required

4
5
6
7
3
12
Step 1
Step 3
Step 2
Step 4
8
9
ASSEMBLY INSTRUCTIONS
Plastic hook 3PCS
Plastic handle 1PC
10
11
Plastic tap
1PC
Plastic knob
3PCS 12
F*2
1
F*2
3
A 3.0*16 4pcs
B 3.0*20 6pcs
C 3.0*34 2pcs
D 3.0*28 25pcs
E 3.5*35 2pcs
F 3.5*45 4pcs
B*6
5
Plastic knob
3PCS
E*2
2
4
Connect left panel part to the left batten of part ,
and secure with 2x screw(F).
4
Fix 3x plastic knobs to part , each using 2x
screw(B).
5
Connect right panel part to the right batten of
part , and secure with another 2x screw(F)4
3
1
2
2
4
Connect part with part , secure with 2x screw(E).
NOTE: (1)At the back of part , there are three
wooden battens with different distances. The longer
distance side faces left, while shorter distance side
faces right.
(2)For part , its middle batten needs to face left,
used for holding middle shelf later. Its bottom batten
is on the right side, next to the middle batten of
part .
4
4

D*6
D*2
8
Plastic hook 3PCS
D*2
11
D*6
6
Connect the 2 parts finished in step 3 and 4, and
secure with 6x screw(D).
(1)fix plastic tap to part using 2x screw(D)
underneath.
(2) Secure part using 6x screw(D)
8
8
Place middle shelf part .
6
Slide 3x plastic hooks into part , then secure
part using total 2x screw(D).
11
11
Step 7
Step 5
Step 8
Step 6

D*5
10
A*4
C
C
Plastic handle
7
D*4
12
Secure part from back using 5x screw(D).
10 Secure part using 4x screw(D) as shown.
12
(1)secure plastic handle using 2x screw(C);
(2)Then secure the door using 4x screw(A).
Slide in plastic sink part from back.
Step 11
Step 9
Step 12
Step 10
9

Critter Sitters
1-Year Limited Warranty Program
For a period of one (1) year after purchase, Citter Sitters (“Manufacturer”) will either repair or replace defective components in
accordance with this Limited Warranty. This warranty is between Manufacturer and the original purchaser and is valid only when
accompanied by the original purchaser’s sales receipt showing original date of purchase and location of purchase. Replacements
under this warranty revert back to the date of original purchase for future warranty.
Manufacturer or its authorized dealer can accept or reject warranty claims based on its findings. This warranty applies in normal
residential use only and is not intended for commercial use. Manufacturer can make substitutions as required of materials,
components, and sub-components of comparable value and utility. This warranty is limited to product repair or replacement (to be
determined solely by Manufacturer). Warranty return is limited to only the single affected component.
This warranty covers only manufacturing defects and does not cover normal wear and tear, abuse or misuse, exposure to extreme heat
or cold, abrasion or excessive weight. This product is intended to be used in standard installations only. This warranty is invalid if
the product is not used for intended purpose. Manufacturer disclaims liability for any aspect of installation and any inconvenience
caused by a defective part of a component.
Certain items are not covered by this warranty. These include, but are not limited to the following:
1. Components subjected to abuse, including abuse intended to simulate failure.
2. Damages caused by retailer, shipper or installation crew (such as scratches, dents, tears, chips, etc.).
3. Any part which merely exhibits normal wear yet functions essentially as new, including chips, scratches or stretching of
materials and stitching.
4. Tears, punctures, scratches or any damage caused by improper installation or use.
5. Damage to frames/welds resulting from improper assembly is not covered. General frame rusting is not covered.
6. Fading and/or discoloration of fabrics resulting from exposure to the elements, chemicals, oils, fluids or any other cause are
not covered.
To make a claim, call the toll-free number below. Please have available a copy of the original sales receipt along with a brief
description of the problem. Please also provide your email address and daytime telephone or cell phone #. All items may be
charged actual freight costs plus $15 for handling. Repairs or replacement will be made at the Manufacturer’s option. Sales and use
taxes, plus shipping and handling charges are the responsibility of the consumer.
THIS IS THE ENTIRE EXCLUSIVE EXPRESS LIMITED LIABILITY. THE MANUFACTURER NEITHER MAKES NOR IS RESPONSIBLE FOR ANY OTHER
WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THOSE OF RETAILING DEALERS. THIS EXCLUSIVE REMEDY IS LIMITED TO RECEIPT OF A CREDIT
IN CONNECTION WITH THE REPAIR OR REPLACEMENT OF ANY PRODUCT OR COMPONENT DEEMED TO BE DEFECTIVE UNDER THE TERMS AND
CONDITIONS AS STATED IN THIS WARRANTY. NEITHER CAMBRIDGE PRODUCTS, THE PRODUCT MANUFACTURER NOR ITS AGENTS SHALL BE LIABLE IN
ANY CASE FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY OR NEGLIGENCE EVEN IF IT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EXCEPT AS OTHERWISE
MAY BE REQUIRED BY LAW, THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES OTHER THAN THE WARRANTY DESCRIBED HEREIN, AND ALL
OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED.
Contact Warranty Services at
1-888-840-4557 or
[e-mail]