Metal Man CART 11 User manual

CART 11
Item#9002159
OPERATOR’S MANUAL
Read carefully and understand RULES FOR SAFE OPERATION and instructions
before operating. Failure to follow the safety rules and other basic safety precautions
may result in serious personal injury.

Manual
1. Product Description
The CART-11 is designed to hold the small MIG welder, welding tools, accessories,consumables and gas
tank etc. Equipped with four rollers, it is very convenient to move. It is an ideal equipment to use in house,
garden and garage, which make the welding work very convenient.
2. Specification
Model Dimension
L*W*H（mm）
Packing Dimension
L*W*H（mm）Weight
kg/b Loading capacity kg/b
CART-11 690*402*720 720*325*120 14/31 50/110
Outline Sketch of the Cart
3. Attention
1. The cart should be placed in horizontal floor. In order to prevent the cant move automatically , it is not
allowed to place the cart on declining surface.
2. It is not allowed to take the parts in/out of the cart when the cart is moving.
4. Installation
When leaving factory, the cart is packaged with disassembly. After you opening the package, please
assemble the cart according to the following images:
Use the screws including in the package to install the cart. Firstly, fasten the screws not very tight. After
all the screws are finished installing and then check the back panel is vertical with the bottom, screw down
all the screws one by one.
No. Description Specification Qty.
1 The first floor CART-11.7 1
2 pothook 8HG.125.207 2
3 The second floor CART-11.4 1
4 The left support CART-11.5 1
5 Bottom CART-11.1 1
6 The front roller φ63 2
7 Hex-nut M6 34
8 The right support CART-11.6 1
9 Hex-bolt M6*10 34
10 Cotter pin 2.5*25 2
11 Flat Washer φ12 4
12 Rubber wheel φ150 2
13 Axle support 8HG.271.008 2
14 Axle CART-11.2 1
15 Back panel CART-11.3 1
16 Iron chain 4mm*0.8m 2