Mocka Hamptons User manual

Phillips & Flathead screwdrivers and hammer required
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
mocka.co.nz | mocka.com.au
B
ACDE
F G H
30 mm
10 mm
Hardware Supplied
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
bolt
x45
locking
nut x 45
dowel
x 22
small
screw x24
I
L + R
slide rail
x6
L + R
slide rail
x6
long
screw x 12
Hamptons Console Table
40 mm
long
screw x 8
J
25 mm
small
screw x4
handle
x 3
K
long
screw x4
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.

2
12
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
61
G
G
E
G
5
Attach 2 x left slide rails (G) to panels [5] and secure with 4 x small screws (E).
Attach 2 x right slide rails (G) to panels [5] and secure with 4 x small screws (E).
A
J
A
J
J
J
A
A
Insert 11 x bolts (A) into panel [1]. Attach 4 x screws (J) into panels [6]
and [1]. Attach 4 x screws (K) into panels [7] and [1].
screwdriver.
A
A
7
K
K
K
K
A
A
5
EE
E
Drawers (x2)
G
A
A
A
Tighten with a

3
34
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
GG
B
G
5
3
E
5
1
B
B
B
Attach panels [5] to panels [1]
and secure with 4 x locking nuts (B).
E
A
A
A
4
A
A
A
EE
G
Attach 1 x left slide rail (G) topanel [3] and secure with 2 x small screws (E).
Tighten with a screwdriver.
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screws (E).
Insert 6 x bolts (A) into panels [3] and [4].

4
56
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
B
4
B
B
C
B
9
8
Insert 2 x dowels (C) into panel [8]. Attach panels [8] and [9] to panels [3] and [4]
and secure with 6 x locking nuts (B).
3
4
5
5
1
CC
C
CCC
B
B
B
B
B
B
D
D
8
9
Insert 6 x dowels (C) into panels [1] and [5]. Attach panels [3], [4], [8]
and [9] to panels [1] and [5]
and secure with 7 x locking nuts (B).
Attach panel [8] to panels [5] and secure with 2 x long screws (D).
B
W
Y
using 1x screw (Y).
Attach 1 x wall strap (W) to panel [9]
B
B
B
C

C
4
5
Insert 4 x dowels (C) into panels [3] and [4].
Attach panels [5] and [9] and
secure with 2 x long screws (D).
Attach panel [2] to panels
5
78
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
A
A
A
A
A
A
A
A
A
A
A
2
C
CC
DD
DD
D
D
5
9
3
2
Insert 12 x bolts (A) into panel [2]. Tighten with a screwdriver.
[3] and [4], secure with 4 x long screws (D).

6
910
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
C
BA
B
C
A
A
C
B
B
A
C
15
15
16
16
Attach 4 x bolts (A) into panels [16]. Attach 4 x dowels (C) to panels [15]
and [16]. Insert 4 x locking nuts (B) into panels [15]. Tighten with a screwdriver.
2
16
16
15
C
C
C
CC
C
B
BBB
BB
BBBBB
B
Insert 6 x dowels (C) into panels [2]. Attach panels [15] and [16] to panel
[2] and secure with 12 x locking nuts (B).

Drawers (x3)
B
B
A
10
A
AA
B
B
11
12
Insert 12 xbolts (A) into panels [10]. Attach panels [11] and [12] to panel
[10] secure with 12 x locking nuts (B). 7
11 12
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
FF
F
F
13
14
12
11
Slide panels [14] between the grooves on panels [11] and [12] to form the base
of the drawer as shown.
Tighten with a screwdriver.
Attach panels [13] to panels [11] and [12], secure
with 12 x medium screws (F).
Drawers (x3)

Drawers (x3)
8
13 14
Hamptons Console Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
E
E
H
I
11
12
10
Attach 6 x slide rails (H) to panels [11] and [12] and secure with 12 x small
screws (E). Insert 3 x handles (I) into panels [10].
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using wall anchor (X), washer (Z) and screw. Ensure the unit is balaced
and steady before use. You’re done, enjoy!
X
Zx1
wall
screw
wall
anchor
wall
screw
Washer
Strap
E
H
E
Tighten with a screwdriver.