Mi MJSXJ05CM User manual

Mi Home Security Camera
360° 1080p
User Manual
This version is for private use only and should not be distributed.

01
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
Read this manual carefully before use, and retain it for future reference
Product Overview
reset
Package Contents: Mi Home Security Camera 360° 1080p, power adapter, wall mounting
accessories pack, power cable, user manual
Installation
The Mi Home Security Camera 360° 1080p can be placed on a number of horizontal surfaces,
such as a writing desk, dining table, and coffee table. It can also be mounted on the wall.
Mounting the Security Camera on a Wall
1. Drill two holes on the wall by using the base of the security camera as a template. It
is recommended that you mark the locations of the holes with a pencil before drilling.
Thediameter of each hole is approximately 6 mm and the depth is approximately 25 mm.
Status Indicator
Reset
Button
Micro-USB
Charging Port
Loudspeaker
Front View Rear View
MicroSD Slot
(Can be revealed
by pushing the
lens upward)
Lens
MIC

02
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
2. Insert the two plastic anchors into the holes on the wall.
3. Make sure to position the base unit so that the arrow is
pointing up. Secure the base unit in place by tightening
the screws into the plastic anchors.
4. Match the grooves on the boom of the camera unit with
the raised area on the base unit. Press down until the two
surfaces are flush, then turn the camera unit in either
direction to lock it in position.
Warning:
To avoid any damages or injuries, the device must be securely fastened to the floor/wall as
specified in the installation instructions.
When mounting the security camera on a wall:
please note that the wall must be able to support at least triple the product's total weight.

03
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
Product Instructions
○ Turning the Device On
The Mi Home Security Camera will automatically activate once the power cable is inserted
into the Micro-USB charging port.
reset
If the indicator light is flashing orange, that means the device is activated successfully.
Ifyoudo not see a flashing orange light, please press and hold the Reset buon to restart
thedevice to enter pairing mode.
Once the Mi Home Security Camera is turned on, please do not aempt to rotate its head
byforce. If the camera position is incorrect, adjustments can be made through the app.
○ Indicator Light
Steady blue on: connected/device status is normal
Flashing blue: network error
Flashing orange rapidly: waiting for connection
Flashing orange slowly: system upgrade in progress
○ Installing a MicroSD Card
Make sure that the power to the security camera is already disconnected.
Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD
card into the slot (the side with contact points must be facing down).
Note: Please unplug the security camera before inserting or removing the Micro SD card.
Please use a genuine Micro SD card manufactured by a qualified supplier, with a reading/
writing speed of no less than U1/Class 10. (Maximum support capacity is 64 GB)

04
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
MicroSD
○ Restore Factory Settings
Press and hold the Reset buon to restore your device to factory seings.
Data stored on the Micro SD card is not deleted.
Connect with Mi Home/Xiaomi Home App
This product works with Mi Home/Xiaomi Home app*. Control your device with Mi Home/
Xiaomi Home app.
Scan the QR code to download and install the app. You will be directed to the connection
setup page if the app is installed already. Or search "Mi Home/Xiaomi Home" in the app store
todownload and install it.
Open Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow prompts to add
your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app
displayed on your device should be taken as the default.
Note: The version of the app might have been updated, please follow the instructions based on
the current app version.
Precautions
• The suitable operating temperature range for this product is between -10 °C and 50 °C. Pleasedo
not use the product in an environment with temperatures above or below the specified range.

05
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
• The security camera is a precision electronic product. In order to ensure its normal operation,
please do not install the device in an environment with high humidity levels or allow water to
enter the product.
• To improve the product's performance, please do not place the camera lens facing or next to
a reflective surface, such as glass windows/doors and white walls, which will cause the image
to appear overly bright in areas close to the camera and darker in areas further away, or cause
the camera to produce white images.
• Please install the product in areas with Wi-Fi reception, and try to place the device where
the Wi-Fi signal is strong. In addition, please keep the security camera away from metal
structures, microwave ovens, or other locations where signal strength may be impacted.
Real-time Surveillance
Launch the Mi Home app and select a Mi Home Security Camera 360° 1080p that is already
connected to monitor the surroundings in real-time. The camera's control interface allows
you to adjust the sharpness of the image, as well as to change the device's vertical and
horizontal viewing angles. Additional features such as screen capture or record and remote
communications can also be performed.
HD
Note: The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home app and your smartphone model.

06
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
Supporting Infrared and Image-intensified Night Vision
The camera will automatically switch to night-vision mode based on changing light conditions.
The 6 built-in infrared night vision lights increase the night vision distance up to 9 meters, so
the camera can clearly capture video in the dark.
Infrared night vision mode sample
Note: The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home app and your smartphone model.
Playback
Mi Home Security Camera's playback feature is only available aer installing a compatible
MicroSD card. Once a MicroSD card has been installed and the security camera is turned on,
videos will be recorded automatically. Aer entering the user interface of the Playback feature,
simply slide the bar on the timeline to select the time period you wish to view.
HD
Note: The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home app and your smartphone model.

07
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
Automatic Surveillance
• Home surveillance can be enabled or disabled in the Mi Home app.
• Available options include 24-hour, daytime, and nighime monitoring. You can also create
your own schedule and set the desired camera angle.
• This product is able to detect movements within its field of view. Once movements are
detected, a video is recorded and you will receive a notification.
Shared Remote Viewing
Through the Mi Home Security Camera 360° 1080p control interface in the Mi Home app, you
can set your security camera as a shared device under the general seings menu, and invite
your friends to view the camera remotely. Your friends will be required to download the Mi Home
app and log in with his/her Xiaomi account.
Share with Mi Account
Share with friends
Share with family
Share...
4G
10:19
4G
10:15
General seings
Home surveillance
Manage storage
Automation
Device sharing
Help
Note: The diagram is for reference only. Actual displays will vary based on different versions of
the Mi Home app and your smartphone model.

08
This version is for private use only and should not be distributed.
This version is for private use only and should not be distributed.
WEEE Disposal and Recycling Information
Correct Disposal of this product. This marking indicates that product should not be
disposal with other household wastes throughout the EU. To prevent possible harm
tothe environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environment safe recycling.
CE
Hereby, Shanghai Imilab Technology Co., Ltd. declares that the radio equipment type
Mi Home Security Camera 360° 1080p is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: hps://www.mi.com/en/service/support/declaration.html
Specifications
Name: Mi Home Security Camera 360° 1080p
Model: MJSXJ05CM Lens Angle: 110°
Aperture: F2.1 Resolution: 1080p
Net Weight: 310 g Input: 5 V ⎓ 2 A
Expandable Memory: MicroSD card (up to 64 GB)
Video Encoding: H.265
Item Dimensions: 118 x 78 x 78 mm
Operating Temperature: -10 °C to 50 °C
Compatible With: Android 4.4 & iOS 9.0 or above
Wireless Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Frequency: 2412–2472 MHz
Max. Output: 16 dBm