MICODUS MTS100 User manual

MTS100 User Manual V1.0
Learn how to set up your new BLE beacon
Copyright ©2022 MiCODUS | All Rights Reserved
R

1. Product Introduction
2. Product Introduction
MTS100 is a high-precision temperature sensor recorder using BLE5.0.
It collects the ambient temperature, broadcast via Bluetooth, and realize
24-hour monitoring through the mobile phone APP or other Bluetooth
products that can transmit. The backup battery life can last up 3 to 5
years.
MTS100 beacon can be used together with the GPS locator host
(ML208G, MV401G). One GPS locator host can be used with 24
Beacons at the most. The GPS locator can upload all the datas of the
beacons to the server remotely at the same time. And you also can get
the realtime location of the beacons via the GPS locator.
MTS100 can be used in logistics management, supply chain,ware-
house, terminal and personal asset management.It can store data for 4
days (one every 5 minutes), data content: date and time + temperature
+ battery.
* Large range and highly sensitive temperature sensor
* Waterproof & Dustproof IP67
* Long standby time up to 6 years
* Bluetooth 5.0: broadcast longest to 500m
* APP connection: send data to cellphone by BLE
* Host connection: one host can connect with 24 beacons at the most
* Local data cache: cache half year data in default mode
* Applicable: Cold Chain, Food & Medicine Keeping, Temperature iOT

4. Product Structure
3.Specifications
Model
Machine Net Weight
Dimensions
Battery Voltage
MTS100
27g
66.5mm(L) * 56mm(W) * 6.7mm(H)
Color Gray
3 VDC
LED / Button Blue LED / Power on; Red LED / Power off
Battery Lithium manganese battery, 1350mAh
Current
Blue Tooth
Broadcast Power
17uA(average) ; 4uA(standby) ;
1.1uA(power off)
Bluetooth 5.0
8db
Broadcast Frequency 5s
Transmit Length 500m in open environment
Working Temperature -20°C ~ 60°C
0.5°C(0°C~65°C) ；
Sensor Accuracy +
-1°C(-20°C~0°C) ；
+
-
Storage Temperature -30°C ~ 80°C
Device Information
Working Parameters

5. Package Content
Temperature Beacon
User Guide
Packing Box
x 1
x 1
x 1
6. Operating Instructions
Long press the "start" menu 3 seconds to turn on the device, under
this state, the device is searchable and connectable. Blue led
indicator will flash 5 times, from fast flash to slow flash and it will stop
flashing after 1min, this means the switch on action is completed.
Long press the "stop" menu 3 seconds, the red led indicator will flash
3 times then the device will shutdown.
1. How to switch on?
2. How to shutdown?
* Under power-on state, if you Press the "start" button, the blue light
will turn on, it means the device is working properly;
* The blue light will light up one time when the device connected
successfully with APP, and the red light will light up one time when the
device is disconnected from the APP.
* The red indicator will flash fast when the temperature alarm was
triggered
3. Others:
NOTE
:When the battery voltage is lower than 2.5V, the
device will not work properly!

7. Operating Instructions
01.01.Click “Add Device” to
start adding
02.Find and enter the
corresponding MAC and KEY
on the back label of the
MST100 device, and name the
setting by yourself
03.The device is added
NOTE
:The device is connected to the mobile phone
through Bluetooth, and various parameters of the device can
be configured in the smartphone APP. Historical data can be
queried in the APP.

Command
Type
Command
Format Explanation Example
8. SMS Commands For Host With Beacon
BLE
BLE,3,119,3000,60#
Enable both BLE scanning and
advertising,the scanning interval is
119s,the advertising interval is 3000
s and the data will be updated per
60s
BLE,0# Disable BLE
WHITELIST
NLIST,,ENABLE#
NLIST,Num,MAC# Num:1-40,MAC:the MAC address of NLIST,Num,C7:7E:23:FE:B0:B3#
NLIST,Num? Num: 1-40 NLIST,1?
NLIST,Num# Num: 1-40 NLIST,1#
When BLE Enable but NLIST
DISABLE,the host device can scan
all devices around it;
When BLE Enable ant NLIST
enable,the host device will just scan
the bundled devices;
E-mail: [email protected]
Skype: MiCODUS
9. Any Questions?
10. Download the APP
Download on the
APP Store
Download for
Android
Search "MiCODUS" in iOS APP store or Google Play Store,
or just scan the QR code as below to download MiCODUS
APP: