
to
to
to
to
to
Zones Sensitivity
Zone Characteristics
Zone Characteristics 2
Response to Zone Alarm
Response to Zone Alarm 2
ENTERENTER
NEXT/BACK
NEXT/BACK
Zone 16
Zone 1
1
2
Zone 16
Zone 1
ENTER
NEXT/BACK
Zone 16
Zone 1
Siren
Relay
Dialler
* Monitoring St. 1
* Monitoring St. 2
Siren Tone
Microphone
Fire Detector
ENTER
NEXT/BACK
ENTER
ENTER
Bypass
Normally Open
24 Hours
Active in "Home 1"
Active in "Home 2"
Entry Delayed
Entry Follower
End of Line Resistor
Following Zones
NEXT/BACK
X4
ENTER
Interval Time
Zone 1 to 16
Zone 1 to 16
Pulse Count
Automatic Bypass
Zone Bypass Cancelled
Pulse Counting
(Double Knock)
ENTER
Interval Time
Count Time
NEXT/BACK
* ID Account Number
3
* Communication Format
* Report Codes Telephone
* Report Codes Radio
Telephone, Ring, Access
4
NEXT/BACK
Prefix (Calling Card)
Outside Line (PBX)
Number of Rings
ENTER
ENTER
ENTER
* Station Phone
Siren & Relay
NEXT/BACK
5
Alarm Time
ENTER
Tones
NEXT
Check Now
ENTER
ENTER
Output Card
ENTER
ENTER
Normally Open
0 to 8
ENTER
ENTER
I=0
II=0
Zone 1
Zone 2
Zone 3
Zones 4 to 16
ENTER
ENTER
Zone 16
Zone 1
AUX 1
AUX 2
Siren Time
Relay Time
Output Card Time
AUX 1
AUX 2
Delay
AC Voltage CUT
Low Voltage
Telephone Failure
Tamper Opening
Duress ("*" + "#")
Zone Detector Voltage Fault
Not in Use
Alarm Confirmation
Zone #1 to Output
Zone #16 to Output
NEXT/BACK
NEXT
Note:
All menu items marked with asterisk (*) are
associated with an Alarm Receiving Center (ARC).
NEXT
ENTER
ENTER
ENTER
Delay Time Select (A/B)
X
8
Outputs
Press NEXT for the next menu item.
Press BACK for the previous menu
item.
Press END to exit a menu.
Press END number of times to exit
programming.
Menu Navigation
P/N 4410075 Rev. D (Mar-2004)