MICODUS MTH100 User manual

MTH100 User Manual V1.0
Learn how to set up your new BLE beacon
Copyright ©2022 MiCODUS | All Rights Reserved
R

1. Features
2.Specifications
Model
* High sensitive temperature & humidity sensor
* 120*120px LCD display screen
* Bluetooth 5.0, broadcast longest to 500m
* Built-in 600mAh replaceable coin cell battery
* Waterproof IP65
* Long standby up to 2 years
* CSV data can be downloaded via USB
* Multiple alarms: temperature, humidity, vibration, tilt, low battery alarm
* GPS host connection via BLE
Machine Net Weight
Dimensions
Battery Voltage
MTH100
42g
101mm(L) * 42mm(W) * 11.5mm(H)
LCD Size 24.58mm X 24.58mm
3 VDC
LCD Resolution 120*120px
Bluetooth Version BLE5.0
Temperature
Measurement Range
Temperature
Measurement Accuracy
Humidity
Measurement Range
-20℃~60℃
± 0.2℃
0%～100% RH
Humidity
Measurement Accuracy ±2% RH
Local Storage Capacity Up to 100,000 sets of data
Device Information
Working Parameters

4. Package Content
BLE Beacon
CR2450 Button Battery
Cover Slip
User Guide
Packing Box
x 1
x 1
x 1
x 1
x 1
3. Product Structure

1. Use the pick to twist the battery cover towards OPEN
5. Install The Battery
2. Insert the battery into the battery compartment in the direction
shown in the figure
Attention: This device does not have an on/off button, and it starts to
work after installing the battery. If the machine is not used for a long
time, please remove the battery.
3. Cover the battery cover and tighten

6.Button Definition
7.Definition Of Indicator Lights
Left Button: Page/Start recording/Mark
Right Button: Return / Stop recording
Left Button + Right Button: Turn On/Off Bluetooth
Left Button
Short Press Long Press
Menu Page Menu PageStart Recording
View QR CodeBack to Main Menu
Right Button
Short Press Long Press
Start Recording
View QR CodeBack to Main Menu
Operation
Inactive Activated
LED Event State
Trigger an alarm
Long press the "Start" button to MARK under
recording status
RED LED
Blinks every 1 second
Flash once

8.Screen Display
a.Home screen overview
b.Historical data maximum
and minimum
c.Upper and lower limit of
alarm value

9.Icon Desription
Battery icon Data needs to be formatted
Temperature and humidity
alarm upper limit
Temperature and humidity
alarm lower limit
Light sensor alarm icon (display when the light sensor value
exceeds the preset limit value)
Humidity alarm icon (display when the humidity value exceeds
the preset limit value)
Temperature alarm icon (display temperature sensor value
exceeds the preset limit value)
Dynamic sensing warning icon (display during collision/tilt warning)
Bluetooth broadcast icon
Bluetooth host is connected
Local record icon

10.Operation via Mobile APP
02.Find and enter the
corresponding MAC and KEY
on the back label of the
MST100 device, and name the
setting by yourself
03.The device is added
01.01.Click “Add Device” to
start adding

NOTE
:The device is connected to the mobile phone
through Bluetooth, and various parameters of the device can be
configured in the smartphone APP. Historical data can be
queried in the APP.
Command
Type
Command
Format Explanation Example
11. SMS Commands For Host With Beacon
BLE
BLE,3,119,3000,60#
Enable both BLE scanning and
advertising,the scanning interval is
119s,the advertising interval is 3000
s and the data will be updated per
60s
BLE,0# Disable BLE
WHITELIST
NLIST,,ENABLE#
NLIST,Num,MAC# Num:1-40,MAC:the MAC address of NLIST,Num,C7:7E:23:FE:B0:B3#
NLIST,Num? Num: 1-40 NLIST,1?
NLIST,Num# Num: 1-40 NLIST,1#
When BLE Enable but NLIST
DISABLE,the host device can scan
all devices around it;
When BLE Enable ant NLIST
enable,the host device will just scan
the bundled devices;

E-mail: [email protected]
Skype: MiCODUS
12. Any Questions?
13. Download the APP
Download on the
APP Store
Download for
Android
Search "MiCODUS" in iOS APP store or Google Play
Store, or just scan the QR code as below to download
MiCODUS APP: