Micro Direct MD Spiro SpiroBank II MD10 User manual

SpiroBank II
Model MD10
Quick Start Guide
Micro Direct, Inc. 803 Webster Street Lewiston, ME 04240
Toll Free: 800-588-3381 Email: [email protected]

SpiroBank II Basic Quick Start
The SpiroBank II Basic can be turned on or off by holding this
button
there will be 3 screens that appear:
the first is the logo splash screen
and shows the date & time

SpiroBank II Basic Quick Start
The second screen shows:
the number of patient files,
the number of spirometry tests,
the amount of free memory
and the battery symbol indicating
the amount of battery charge
It will also show you the configuration
icon that brings you to the Configuration Menu
Pressing the right arrow
under this symbol will take you to the Configuration Menu
The third screen is the Main
Screen where you can choose
a function.
You can also navigate the
configuration menu from the main
screen pressing the ESC button
Use the left & right arrow buttons to scroll up and down
through configuration menu.

SpiroBank II Basic Quick Start
Entering patient Information
Press the left arrow
under the I.D. symbol
This screen appears:
There are two choices for
entering patient information
Choose New by pressing the
left arrow to create a new
patient
Choose Modify by pressing
the right arrow to edit an
existing patient file.
Selecting New Patient:
the insert patient data screen will appear
Use the minus and plus buttons to increase/decrease
numbers in the number fields.
Once birthdate, height (inches or cm) and weight (lb or kg)
have been entered, two choices will appear for gender.
Press the minus to highlight male or press the plus to
highlight female.

SpiroBank II Basic Quick Start
Then press the OK button to
make your choice. Next the
ethnicity option will appear.
Use the left and right arrow to
scroll up and down through the
choices. Press the OK button
to confirm your choice.
Now you will be back on the main screen
To Perform an FVC Test
Insert the flow turbine with the cardboard mouthpiece pointing
out the same side the screen is on and twist it clockwise to lock.
Back on the main screen, press the minus sign under the
spiro symbol
A new screen appears with
spirometry test choices
(The POST choice will be grayed
out until at least one Pre FVC
test is done).
Press the button under the choice of test.
The next screen will have instructions about performing the test.
The patient may begin to perform the test at this screen.
The test will time out if not started in time.
Connect the device to the computer via the micro USB cable
to charge it.
The screen will say ‘external control’ and will remain on while
connected.

SpiroBank II Basic Quick Start
To access the default configuration menu
To access patient data from the main display
To perform a new test of a patient recalled from the patient records
To insert new patient data
To modify patient data
To display the most recent test of a patient
To show the last test performed
To access the database of the performed tests
To search a test with the date of birth of a patient
To search a test starting from a specific date onwards (partial
database)
To scroll through a database from beginning to end and vice versa
(complete database)
Male patient selection
Female patient selection
To access spirometry testing type
To perform a forced vital capacity spirometry test FVC/search FVC
tests in memory
To perform a slow vital capacity spirometry test VC/search VC
tests in memory
To perform a spirometry test with a bronchodilator