Operating instructions for connecting with the PC
●The controller connects to the PC for the first time
1. Insert the receiver into the PC, automatically identify the PC, the identification is successful,
the receiver indicator light is always on, short press the receiver pairing button, the receiver
indicator light flashes, and the receiver enters the pairing state.
2. When the handle is turned off, press and hold the Home button of the handle for 3 seconds,
the 4 LED lights of the handle will flash rapidly, and the handle will enter the pairing state.
3. The handle and the receiver are successfully connected. In PC mode, the first LED light of the
handle is always on, and the indicator light of the receiver is always on.
●The controller has been connected to the receiver
1. Insert the receiver into the PC, and automatically identify the PC. If the identification is
successful, the receiver indicator light is always on, and the receiver automatically enters the
return connection state.
2. When the controller is off, short press the Home button of the handle, the 4 LED lights of the
handle flash at the same time, and the handle enters the connection state.
3. The controller and the receiver are successfully connected. In PC mode, the first LED light of
the handle is always on, and the indicator light of the receiver is always on.
Precautions
•Please read this product manual and precautions before using this product
•When using this product, please follow the following specifications,
1) Please do not use this product in complex and harsh environments (such as surrounding
high voltage power grids, strong magnetic fields or large mechanical equipment, etc.), So as not
to affect product performance and service life.
2) Please do not put this product in the fire to bake or burn, so as to avoid danger and
environmental pollution.
3) Please do not wipe with corrosive liquids to avoid hard objects scratching the surface of the
case and affecting the appearance
4) Do not place this product in the following environments: places that am too hot, cold or too
humid, places that are exposed to direct sunlight, and places that are too dusty.
5) When the surface of the case is stained with dirt and dust, wipe it with a dry muslin. Do not
use cleaning fluids and other chemical solvents to avoid corrosion of the surface of the case and
damage to the components in the machine.
6) Unplug the USB cable and remove the battery when not in use for a long time.
7) Do not try to disassemble, disassemble or modify any part of this product by yourself. Such
behavior may damage the product and invalidate your product warranty
8) If you want to discard this product, please put it in a professional recycling station for
disposal
