Microview iSERIES I30VD User guide

iSERIES I30VD VariFocal Dome Camera
Quick Operation Guide
UD.6L0201B1164A02

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Thank you for purchasing our product. If there are any questions, or requests,
please do not hesitate to contact the dealer.
This manual applies to the MicroView I30VD dome camera.
This manual may contain several technical incorrect places or printing errors, and
the content is subject to change without notice. The updates will be added to the
new version of this manual. We will readily improve or update the products or
procedures described in the manual.
DISCLAIMER STATEMENT
“Underwriters Laboratories Inc. (“UL”) has not tested the performance or
reliability of the security or signaling aspects of this product. UL has only tested
for fire, shock or casualty hazards as outlined in UL’s Standard(s) for Safety,
UL60950-1. UL Certification does not cover the performance or reliability of the
security or signaling aspects of this product. UL MAKES NO REPRESENTATIONS,
WARRANTIES OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE
OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS
PRODUCT.
0100001030827
2

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to comply with the
limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation
3

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
EU Conformity Statement
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the
applicable harmonized European standards listed under the
Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this
symbol cannot be disposed of as unsorted municipal waste in
the European Union. For proper recycling, return this product
to your local supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection points.
For more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a
battery that cannot be disposed of as unsorted municipal
waste in the European Union. See the product
documentation for specific battery information. The battery
is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return
the battery to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
4

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Safety Instruction
These instructions are intended to ensure that user can use the product correctly
to avoid danger or property loss.
The precaution measure is divided into “Warnings” and “Cautions”
Warnings: Serious injury or death may occur if any of the warnings are neglected.
Cautions: Injury or equipment damage may occur if any of the cautions are
neglected.
Warnings
Please adopt the power adapter which can meet the safety extra low voltage
(SELV) standard. And source with DC 12V or AC 24V (depending on models)
according to the IEC60950-1 and Limited Power Source standard.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Warnings Follow these
safeguards to prevent serious
injury or death.
Cautions Follow these precautions
to prevent potential injury or
material damage.
5

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
To reduce the risk of fire or electrical shock, do not expose this product to rain or
moisture.
This installation should be made by a qualified service person and should
conform to all the local codes.
Please install blackouts equipment into the power supply circuit for convenient
supply interruption.
Please make sure that the ceiling can support more than 50(N) Newton gravities
if the camera is fixed to the ceiling.
If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself. (We shall not
assume any responsibility for problems caused by unauthorized repair or
maintenance.)
Cautions
Make sure the power supply voltage is correct before using the camera.
Do not drop the camera or subject it to physical shock.
Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.
Do not aim the camera lens at the strong light such as sun or incandescent lamp.
The strong light can cause fatal damage to the camera.
The sensor may be burned out by a laser beam, so when any laser equipment is
being used, make sure that the surface of the sensor not be exposed to the laser
beam.
6

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C ~ 60°C), dusty or damp environment, and
do not expose it to high electromagnetic radiation.
To avoid heat accumulation, good ventilation is required for a proper operating
environment.
Keep out of water and any liquid.
While shipping, the camera should be packed in its original packing.
Improper use or replacement of the battery may result in hazard of explosion.
Please use the manufacturer recommended battery type.
7

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Table of Contents
1 Overview ..........................................................................................................9
2 Installation......................................................................................................11
2.1 Disassembling ................................................................................11
2.2 Mounting .......................................................................................12
2.2.1 Ceiling mounting..................................................................12
2.2.2 Ceiling mounting with gang box ...........................................16
2.2.3 Wall Mounting .....................................................................18
2.3 Image and Focus Adjusting .............................................................21
3 Setting the Network Camera over the LAN.....................................................24
4 Accessing via Web Browser ............................................................................27
8

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
1Overview
Figure 1-1 Overview
Table 1-1 Overview
No. Description
1 Bubble
2 Black Liner
3 Reset Button
4 AUX Video Output Interface
5 Serial Port
2
1
3
45
67
8
9
9

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
No. Description
6Power interface
7 Ethernet interface
8 Adapter Plate
9 Lens
10

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
2Installation
Before you start:
Please make sure that the device in the package is in good condition and all
the assembly parts are included.
Make sure that all the related equipment is power-off during the installation.
Check the specification of the products for the installation environment.
Make sure the power supply is matched with your required voltage to avoid
damage.
If the product does not function properly, please contact your dealer or the
nearest service center. Do not disassemble the camera for repair or
maintenance by yourself.
Please make sure that the wall is strong enough to withstand three times the
weight of the camera.
2.1 Disassembling
Steps:
1. Loosen the three screws on the edge of the bubble with the screw driver.
2. Open the bubble and remove the black liner as shown in Figure 2-1.
11

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Figure 2-1 Open the Bubble and Remove the Black Liner
2.2 Mounting
2.2.1 Ceiling mounting
Steps:
1. Disassemble the camera. Refer to the section 2.1.
2. Attach the drill template (supplied) to the place where you want to fix the
camera.
3. Drill three screw holes in the ceiling according to the drill template as shown in
Figure 2-2.
Figure 2-2 The Drill Template
Screws
Black Liner
Bubble
Drill Template
Screw Hole
Cable Hole
12

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
4. If you want to route the cables inside the ceiling, drill a cable hole in the ceiling
according to the drill template. Skip this step if you want to route the cables
on the surface of the ceiling. Refer to Conduit Installation on the Side for side
cable routing.
5. Attach the camera to the ceiling by aligning the holes of the back box with the
holes on the ceiling.
6. Secure the camera with the supplied screws as shown in Figure 2-3.
Figure 2-3 Secure the Camera
7. Route the cables through the cable hole.
8. Connect the video output connector to the monitor. Connect the power
connector to the power supply.
Back Box
Screws
13

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
9. Adjust the image and focus. Please refer to the section 2.3 for more detailed
information.
10. Install the black liner back to the camera.
11. Align the bubble to the mounting base and fix it by tightening the screws as
shown in Figure 2-4.
Figure 2-4 Secure Black Liner and Bubble
Conduit Installation on the Side
If you want to route the cables from side of the camera, you need to follow the
steps below to install a conduit for cable routing.
Steps:
1. Rotate the water-proof plug counterclockwise to remove it from the camera.
14

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Figure 2-5 Remove the water-proof plug
2. Route the power cable and network cable through the side outlet to the
conduit.
3. Align and rotate clockwise the conduit to the side outlet tightly.
Figure 2-6 Install the Conduit to the Camera
Water-proofPlug
Side Outlet
Conduit
15

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
For wall mounting, position the side outlet directly downward for water proofing.
Figure 2-7 Side Outlet Direction
2.2.2 Ceiling mounting with gang box
Steps:
1. Disassemble the camera. Refer to the section 2.1.
2. Install the gang box in the ceiling (see list of related accessories).
3. Attach the mounting base to the gang box with two screws.
Screw Hole
Screw Hole
Mounting Base
Downward
16

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
Figure 2-8 In-ceiling Mount
4. Route the cables through the hole in the center of the mounting base.
5. Align the camera with the mounting base.
6. Tighten the screws to secure the camera with the mounting base.
7. Connect the video output connector to the monitor. Connect the power
connector to the power supply.
8. Adjust the image and focus. Please refer to the section 2.3 for more detailed
information.
Figure 2-9 Secure Camera
17

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
9. Install the inner black liner back to the camera.
10. Align the lower dome with the camera.
11. Tighten the screws to secure the lower dome with the camera as shown in
Figure 2-10.
Figure 2-10 Secure Lower Dome
2.2.3 Wall Mounting
For the wall mounting, you have to purchase a wall mount.
Steps:
1. Disassemble the camera. Refer to the section 2.1.
2. Install the wall mount and mounting adapter as shown in Figure 2-11.
3. Align the screw holes of the mounting base with the corresponding screw
holes of the mounting adapter.
18

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
4. Secure the mounting base to the mounting adapter with four screws.
Figure 2-11 Install the Mounting Adapter
Figure 2-12 Secure Mounting Base
Mounting
Adapter
Mounting
Base
19

iSERIES I30VD Network Dome Camera
·
Quick Operation Guide
5. Route the cables through the hole in the center of the wall mount.
6. Align the camera with the mounting base.
7. Tighten the set screws to secure the camera with the mounting base.
8. Connect the video output connector to the monitor. Connect the power
connector to the power supply.
9. Adjust the image and focus. Please refer to the section 2.3 for more detailed
information.
Figure 2-13 Secure Camera
Camera
20