DESCRIPTION
The model 70-1308A assembly is used to interface an IBM*PC/XT/AT or
compatible computer to a Syn-Tech II, Syn-Tech XTR, or 8-Channel mobile
transcevier, or to a Syn-Tech XTR Handheld for programming or test pur-
poses.
If you are programming a mobile transceiver, the 25-pin connector plugs into
a serial port of the computer while the 10-pin connector plugs directly into
the transceiver, and the 70-1308A is powered by the transceiver.
If you are programming a Syn-Tech XTR Handheld, you will also need to
connect the 70-1053A interface cable, the 70-1056A universal test box, or
the 70-1057A programming/RF test cable to the radio. The 25-pin connector
of the 70-1308A plugs into a serial port of the computer while the 10-pin
connector plugs directly into the 70-1053A, 70-1056A, or 70-1057A.
Associated Manuals:
70-999375
Computer-Based Programmer for Syn-Tech II Mobile
Transceiver User's Manual
70-999598
Computer-Based Programmer for Syn-Tech XTR Mobile
Transceiver User's Manual
70-999993
Computer-Based Programmer for 8-Channel Mobile
Transceiver User's Manual
70-999970
Computer-Based Programmer for Syn-Tech XTR
Handhelds User's Manual
*IBM is the registered trade mark of the International Business Machine
Corporation.
FG
SD
RD
RTS
CTS
DR
GND
CD
