Midland X-Tra Talk GXT1000 Series User manual

Model GXT1000/1050/1191/1030 Series
Page 2 www.midlandusa.com
Welcome to the world of Midland electronics
Congratulations on your purchase of a high quality MIDLAND product.
Your 2-way radio represents state-of-the-art high-tech engineering.
Designed for GMRS (General Mobile Radio Service) operation, this
compact package is big on performance. It is a quality piece of electronic
equipment, skillfully constructed with the finest components. The circuitry
is all solid-state and mounted on a rugged printed circuit board. Your two-
way radio is designed for reliable and trouble-free performance for years
to come.
Features
- 50 GMRS/FRS Channels
- 142 Privacy Codes (38 CTCSS / 104 DCS)
- Waterproof JIS4 Standard
- VOX
- Selectable Call Alert (5 additional Animal Sounds on GXT1050)
- NOAA Weather Radio
- NOAA Weather Alert
- NOAA Weather Scan
- Dual Watch
- Vibrate Alert
- Monitor Function
- Roger Beep Tone
- Silent Operation
- Keypad Lock
- Whisper Function
- SOS Siren
- Power HI/MED/LO Settings
- Speaker / Microphone Jacks
- Battery Meter / Battery Low Indicator
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device does not cause harmful interference, and (2) this radio must
accept any interference that may cause undesired operation. To maintain compliance with
FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and
meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories
supplied or designated for this product. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines. (Tested with Headset Model:AVP-1)

IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION
(Only Applicable for GMRS Radio Use in the United States)
The radios operates on GMRS (General Mobile Radio Service) frequencies
which require an FCC (Federal Communications Commission) license. You must
be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the
GMRS channels of the radios. Serious penalties could result from unlicensed use
of GMRS channels, in violation of FCC rules, as stipulated in the
Communications Acts Sections 501 and 502 (amended).
You will be issued a call sign by the FCC which should be used for station
identification when operating the radio on GMRS channels. You should also
cooperate by engaging in permissible transmissions only, avoiding channel
interference with other GMRS users, and being prudent with the length of your
transmission time.
To obtain a license or ask questions about the license application, contact the
FCC at 1-888-CALL FCC or go to the FCC's website:
http://www.fcc.gov and request form 605.
Exposure To Radio Frequency Energy
Your Midland radio is designed to comply with the following national and
international standards and guidelines regarding exposure of human beings to
radio frequency electromagnetic energy:
- United States Federal Communications Commission, Code of Federal
Regulations: 47 CFR part 2 sub-part J
- American National Standards Institute (ANSI)/Institute of Electrical &
Electronic Engineers (IEEE) C95. 1-1992
- Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition
- National Council on Radiation Protection and Measurements (NCRP) of the
United States, Report 86, 1986
- International Commission on Non-lonizing Radiation Protection (ICNIRP)
1998
To control your exposure and ensure compliance with the general population or
uncontrolled environment exposure limits, transmit no more than 50% of the
time. The radio generates measurable RF energy exposure only when
transmitting.
IMPORTANT: Changes or modifications to this unit not expressly approved by
MIDLAND RADIO CORP. could void your right to operate this unit. Your radio
is set up to transmit a regulated signal on an assigned frequency. It is against
the law to alter or adjust the settings inside the COMMUNICATOR to exceed
those limitations. Any adjustment to your radio must be made by qualified
technicians.
Model GXT1000/1050/1191/1030 Series
Page 3 www.midlandusa.com

13. POWER/VOLUME KNOB – Turn clockwise to
turn the power on and increase the volume
level. Turn counter-clockwise to decrease the
volume level and turn the power off.
14. PTT Button – Press and hold to transmit voice
communication.
15. CALL/LOCK Button – Press to send a CALL
ALERT signal. Press and hold to turn KEY
LOCK on/off.
16. UP sand DOWN / SOS SIREN tButtons –
Make adjustments in MENU mode. Press and
the DOWN button for 5 seconds to activate the
SOS Siren function.
17. SPEAKER – Built-in speaker.
18. ANTENNA
19. EXTERNAL SPEAKER/MIC JACK
20. MENU/WX SCAN Button – Press to access
Menu mode. Press and hold for 5 seconds to
activate the NOAA Weather Scan function.
21. MONITOR/SCAN Button – Press to enter
SCAN mode. Press and hold to enter
MONITOR mode.
22. MIC – Built-in microphone.
LCD DISPLAY
CONTROLS
1
13
14
15
16
17
22
21
20
19
18
Model GXT1000/1050/1191/1030 Series
Page 4 www.midlandusa.com
11
10
9
8
7
6
5
4
3
2
1. BATTERY METER – Indicates the battery
level.
2. WHISPER ICON – Indicates when the
Whisper feature is on.
3. KEY LOCK ICON – Indicates KEY LOCK
mode is on.
4. VOX ICON – Indicates when VOX mode is
active.
5. NOAA WEATHER (WX) BAND ICON–
Indicates when the radio is in Weather
Band mode.
6. CHANNEL NUMBER – Changes from
1~50 on GMRS/FRS band (1~10 on WX
band).
7. VIBRATE ALERT ICON – Indicates when
the Vibrate-Alert feature is on.
8. SOS SIREN ICON – Indicates the SOS
Siren is on.
9. TRANSMIT (TX) / RECEIVE (RX) ICON –
Indicates radio is transmitting (TX) a signal,
or radio is receiving (RX) a transmission.
10. TRANSMIT POWER LEVEL ICON –
Indicates TX Power setting (H/M/L)
11. PRIVACY CODE ICON – Indicates
Privacy Code setting (CTCSS/DCS).
12.PRIVACY CODE – Indicates Privacy Code
selected by user (oF~38/oF~104). It can
only be used on Ch 1~22.
12

Model GXT1000/1050/1191/1030 Series
Page 5 www.midlandusa.com
BATTERY INSTALLATION
Your radio operates with either a NiMH battery pack or optional 4 AA
alkaline batteries. The belt clip should be removed (see below) to
ease installation or removal of the batteries.
To install the batteries:
1. With the back of the radio facing you, remove the belt clip (see
diagram below) for easy access, then remove the Battery Cover
by pulling down the Battery Cover Latch and lifting up the Battery
Cover from the radio.
2. Insert 4 AA batteries observing the polarity as shown. Installing
the batteries incorrectly will prevent the radio from operating or
may damage the radio.
3. Return the Battery Cover by sliding it up on the radio and push up
the Battery Cover Latch until it locks into place. Replace the belt
clip, making sure it locks into place.
INSTALLING THE BELT CLIP
To install the BELT CLIP, slide the clip down
into the slot on the back of the radio until the
BELT CLIP LATCH clicks. To remove the BELT
CLIP, press the LOCK TAB down, then gently
pull the belt clip up toward the top of the radio.
BATTERY
COMPARTMENT
One Battery inserted
in this slot
BATTERY COVER
BATTERY COVER
LATCH
BELT CLIP
LOCK TAB
BELT CLIP
LATCH

Model GXT1000/1050/1191/1030 Series
Page 6 www.midlandusa.com
CHARGING THE BATTERY PACK
Your radio is equipped for using a rechargeable NiMH battery pack
which can be recharged using a desktop charger. Initial charge time
is 24 hours with a charge time of 12 hours thereafter. For maximum
battery life, we recommend charging the battery pack when the low
battery icon comes on. Remove the radios from the charger when the
charge time expires.
To charge using a Desktop Charger:
1. Place the rechargeable battery packs in the radios.
2. Connect the AC adapter into an AC wall outlet.
3. Insert the AC adapter plug (or DC Cigarette Lighter adapter if
charging in vehicle) into the desktop charger jack.
4. Place the units into the desktop charger slot and note that the LED
indicator with RED color will light up, indicating charging function.
In order to ensure that the battery pack is fully charged, it is
recommended that the battery pack be charged for at least 12
hours with the radio turned OFF.
1. Only use our NiMH battery pack.
2. Do not attempt to charge alkaline batteries or any batteries
or battery packs other than the one indicated in the manual.
This may cause leakage and damage to the radio.
3. For long term storage of the radio, turn the radio OFF and
remove the batteries from the radio.
BATTERY LEVEL INDICATOR
Your radio has a BATTERY LEVEL METER that shows the
battery power level. The greater the number of bars visible, the
stronger the battery level. When the battery level is low, the Battery
Shell icon and “Lo bt” will flash in the display indicating your
batteries should be replaced or recharged if using a rechargeable
battery pack.
!

Model GXT1000/1050/1191/1030 Series
Page 7 www.midlandusa.com
POWER ON/OFF AND VOLUME
Rotate the POWER/VOLUME knob clockwise to turn the radio on
and increase the volume level. Rotate the control counter-clockwise
to reduce the volume level and to turn the radio off. During Power On,
the radio will beep 2 times with different tones, the LCD will display all
icons for 1 second and the LCD display will indicate the last channel
selected.
TRANSMITTING AND RECEIVING A CALL
To communicate, all radios in your group must be set to the same
channel and Privacy Code.
1. For maximum clarity, hold the radio 2 to 3 inches from your mouth.
2. Press and hold the PTT button and speak in a normal voice into the
microphone. The TX icon will appear continuously on the LCD
display while transmitting.
3. To receive a call, release the PTT button. The RX icon will appear
on the display when your radio is receiving a transmission.
ABOUT RANGE
Your GXT Series radios are designed to give you maximum range
under optimum conditions.
Optimum Conditions are:
lOver water
lOpen rural areas without obstructions
lFlat areas where you can see the other person
To ensure you get maximum range:
lBe sure to use fresh or fully charged batteries - low batteries will
cause low power conditions.
lBe sure you are on a GMRS channel - FRS channels are
restricted by the FCC to low power.
lBe sure to set your radio to use Hi power.
OPERATING YOUR RADIO

Model GXT1000/1050/1191/1030 Series
Page 8 www.midlandusa.com
GXT1000/1050/1191/1030 SERIES QUICK REFERENCE CHART
MONITOR
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting. Press and hold the MONITOR
button for 1 second again to get out of MONITOR mode.
SCAN
Your radio can scan all 50 channels for activity. To enter, quickly press
the SCAN button. Repeat the same procedure to exit. Your radio will
rapidly scan each of the 50 channels and stop on any active channel.
Your radio will resume scanning after 4 seconds when the channel is
no longer active.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel for 10
seconds before resuming scan when PTT button is no longer
pressed.
To resume scanning, quickly press the s\tbutton.
CALL ALERT
Your radio can transmit a call alert for a fixed length of time. To send
a call alert, press the CALL button. The TX icon will appear while
transmitting a call alert and a tone can be heard on the speaker for
confirmation.
The GXT1000/1191/1030 has 10 call alert selections while the
GXT1050 has 15 call alerts including 5 “animal sound” call alerts -
Cougar, Duck, Crow, Wolf, and Turkey.
MENU Channel eVOX
1~50
Privacy
Roger Beep
On/Off
Call Tone
1~10
Vibrate
On/Off
WX Channel
1~10
Silent Operation
On/Off
oF~9
Off
CTCSS
DCS
1~38
1~104
WX Alert On/Off
1~15 for GXT1050
Power
H/M/L
MENU
Press and hold the
MENU button for
5 seconds
WX Scan
1~10
*** Only on Ch 1 ~ 22
Dual Watch
Channel
1~50
DUAL WATCH FUNCTION
Dual Watch
Privacy
Whisper
On/Off
Press and hold
the DOWN
button for 5
seconds
SOS
Off
CTCSS
DCS
1~38
1~104
*** Only on Ch 1 ~ 22

SOS SIREN
To activate the SOS SIREN function, press and hold the DOWN/ SOS
SIREN button for 5 seconds. The SOS SIREN icon will appear on the
display, the radio will send out a loud siren sound and the display
backlight will flash. To deactivate the SOS SIREN function press the
PTT button twice.
Warning: The SOS Siren is to be used only in the event of
an emergency. Midland Radio Corporation is not responsible
if there is no response to the SOS Siren.
KEYPAD LOCK
To avoid accidentally changing the radio settings, press the LOCK
button for 2 seconds. The icon will appear on the display. PTT and
CALL will still be active. Repeat the same procedure to unlock the
keypad.
DISPLAY ILLUMINATION
During Power on, the display illumination will activate for approx. 5
seconds. The display illumination can also be activated when the
MENU,MON/SCAN, or s\tbuttons are pressed.
CHANNEL SELECTION (GMRS/FRS BAND)
Press the MENU button once, and then the buttons to select one
of the 50 GMRS/FRS channels. To confirm the selection, press the
PTT button or press the MENU button again to move to the next
feature setting.
SETTING PRIVACY CODES
Your radio has 142 Privacy Codes available which can only be used
on channels 1~22. The selected Privacy Code may be different for
each channel. To select a Privacy Code for the current channel press
the MENU button twice, and then the s\tbuttons to select between
“Off/CTCSS/DCS”. Press the MENU button again and the s\t
buttons to select one of the 38 CTCSS Codes or one of the 104 DCS
Codes.
The Privacy Code icon on the display will indicate whether you set
your Privacy Code in CTCSS or DCS mode. To confirm the selection,
press the PTT button or press the MENU button again to move to the
next feature setting.
Model GXT1000/1050/1191/1030 Series
Page 9 www.midlandusa.com
!
/

Model GXT1000/1050/1191/1030 Series
Page 10 www.midlandusa.com
Note : If you select a CTCSS Privacy Code, any pre-selected
DCS Privacy Code will be cancelled and vice-versa.
Selecting a Privacy Code of "oF"will disable the Privacy feature.
To communicate between two radios, all radios in your group
must be set to the same channel and/or Privacy Code selections.
The Privacy Code can only be set in channels 1~22.
TRANSMIT (TX) POWER LEVEL SELECTION
Your radio has 3 power level settings. To select the power level on
channels 1~7, 15~33 and 38~50, press the MENU button until a “Pr”
icon will appear blinking on the display. Then press the s\tbuttons
to select TRANSMIT POWER LEVEL icon (H: Hi/M: Med/L: Lo). To
confirm, press the PTT button or press the MENU button again to
move to the next feature setting. When the Battery Meter drops to
1 bar , the TX Power will automatically switch from Hi(H) or
Med(M) to Lo(L) level.
Note : You cannot adjust the power setting on the FRS
channels (8~14 and 34~37). They are set to Low power per
FCC regulations.
VOX (Hands-Free Transmission)
Your radio has 9 VOX level settings: (oF/1~9).
TTo set VOX, press the MENU button until the display shows “VOX”.
On the right of the CHANNEL NUMBER display, an “oF” icon
appears. Select “1” ~ “9” by pressing the s\tbuttons and push the
PTT key, or press the MENU button again to move to the next feature
setting. VOX will be more sensitive on the lower setting than on the
higher setting.
To turn VOX off, press the MENU button until the display shows
“VOX”. On the right of the CHANNEL NUMBER display, a “1” ~ “9”
icon appears. Select “oF” by pressing the s\tbuttons and push the
PTT key, or press the MENU button again to move to the next feature
setting.
SILENT OPERATION
Your radio has a SILENT OPERATION mode. In this mode, all
“beeps” and “tones” are disabled.
To set the SILENT OPERATION, press the MENU button until the
display shows a “bP” icon. Select “on” or “oF” by pressing the s\t
buttons and push the PTT key or MENU button.
!
!

Model GXT1000/1050/1191/1030 Series
Page 11 www.midlandusa.com
ROGER BEEP (end of transmission)
TONE
When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the ROGER BEEP tone, press the MENU button until the
display shows an “rb”. Select “on” or “oF” by pressing the s\t
buttons and push the PTT key, or press the MENU button to move to
the next feature setting.
CALL ALERT SELECTION
Your radio has 10 selectable CALL ALERTS (15 for GXT1050). To
select, press the MENU button until a “CA” icon appears and to the
right of the “CA” icon the current CALL ALERT setting is displayed.
Then press the s\tbuttons to make the CALL ALERT selections,
and the radio will emit a corresponding tone for each selection. To
confirm, press the PTT button or press the MENU button to move to
the next feature setting.
Note : GXT1050 has 5 additional “Animal Sound” CALL Alerts -
Cougar, Duck, Crow, Wolf, and Turkey.
VIBRATE ALERT
To set the VIBRATE ALERT, press the MENU button until the display
shows the icon. Select “on” or “oF” by pressing the s\tbuttons
and push the PTT button, or press the MENU button. The icon will
remain on the display if set to “on”.
WHISPER FUNCTION
Your radio has a WHISPER function, to enable the user to transmit a
high sound level even if he is whispering on the microphone.
To turn WHISPER on, press the MENU button until the display shows
the icon blinking, while on the right of the CHANNEL NUMBER,
an “oF” icon appears. Select “on”by pressing the s\tbuttons and
push the PTT button, or press the MENU button. The icon will
remain on the display.
To turn WHISPER off, press the MENU button until the display shows
the icon blinking, while on the right of the CHANNEL NUMBER,
an “on” icon appears. Select “off”by pressing the s\tbuttons and
push the PTT button, or press the MENU button. The icon will
disappear from the display.
Note : The WHISPER function is recommended for use with
headsets for optimum performance

Model GXT1000/1050/1191/1030 Series
Page 12 www.midlandusa.com
NOAA WEATHER RADIO/SCAN
Your radio has a NOAA WEATHER RADIO function, to enable the
user to receive weather reports from designated NOAA stations.
Your radio also has a NOAA WEATHER SCAN function, to enable
the user to scan all 10 channels of the NOAA WEATHER RADIO.
To turn the NOAA WEATHER SCAN on, press and hold the MENU
button for 5 seconds while in GMRS mode. The radio will go to WX
Band mode and start scanning all 10 channels and stop on any active
channel. When the channel becomes inactive for 10 seconds the
radio will resume scanning.
To stop the NOAA WEATHER (WX) SCAN and set the channel
manually on the WX Band, press the MENU button during NOAA
WEATHER (WX) SCAN. The radio will stop scanning and the display
will show the current WX Band channel setting and the icon. While
in WX Band mode press the s\tbuttons to select one of the 10
NOAA WEATHER (WX) BAND channels. To confirm, press the PTT
button or press the MENU button to move to the next feature setting.
To turn the NOAA WEATHER RADIO off, press the PTT button. The
current GMRS/FRS radio setting will be displayed and the icon will
go off.
NOAA WEATHER ALERT
Your radio has a NOAA WEATHER ALERT function, to enable you to
automatically receive weather alerts from designated NOAA stations.
The NOAA WEATHER (WX) ALERT is automatically on during
NOAA WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT on during normal NOAA
WEATHER RADIO mode, press the MENU button twice while in
NOAA WEATHER SCAN mode. The display shows "AL,"while on
the right an "oF" icon appears blinking. Select "on" by pressing the
s\tbuttons. To confirm, press the PTT button or press MENU. The
radio will return to WX BAND and the icon will continue blinking.
If the radio receives a WX ALERT signal from a designated NOAA
station while in GMRS/FRS Radio mode, the radio will beep for 10
seconds while an "AL" and "In" icon appear on the display, after
which it will automatically go to WX BAND.
If any button is pressed while beeping in GMRS/FRS Radio mode,
the radio will automatically go to WX BAND.

Model GXT1000/1050/1191/1030 Series
Page 13 www.midlandusa.com
To turn the NOAA WEATHER (WX) ALERT off, press the MENU
button twice while in WX Band. The display shows "AL,"while on
the right an "on" icon appears blinking. Select "oF" by pressing the
s\tbuttons. To confirm, press the PTT button or the MENU button.
DUAL WATCH FUNCTION
Your radio has a DUAL WATCH function, to enable user to scan 2
channels for any activity. The first channel will be the current channel
setting and the second channel will be the selected channel on the
MENU.
To turn the DUAL WATCH on, press the MENU button until the “oF”
icon appears blinking on the left of the display, while the “dU” icon
appears on the left. Select the second channel by pressing the
s\tbutton. Press the MENU button again and the s\tbuttons to
choose the Privacy Code (oF/dc/ct). Then press the MENU button
again and the s\tbuttons to set the Privacy Code. Pls. note that
the Privacy Code can be set only on Ch 1~22. To confirm, press
the PTT button or the MENU button.
The RX and TX icon will appear at the same time to signify that the
DUAL WATCH function is on and the radio will start to scan both the
current channel/code-in-use and the selected channel/code and stop
on any active channel. Your radio will resume scanning after 4
seconds when the channel is no longer active. When you press the
PTT button to transmit on an active channel, the scanning function
will stop and remain on the active channel for 10 seconds before
resuming scan when the PTT button is no longer pressed. To resume
scanning, quickly press the s\tbutton.
To turn the DUAL WATCH function off, press the SCAN button.
EXTERNAL SPEAKER/MICROPHONE JACK
Your GXT1000/1050/1191/1030 Series can be used with an optional
external speaker/microphone or headset, freeing your hands for other
tasks. To use an optional speaker / microphone or headset:
lOpen the rubber cap on the side of the radio.
lInsert the plug(s) into the SPK/MIC jacks.
lPlace the earbud into your ear, and adjust the
mic into your desired position.
Note : You can charge a rechargeable NiMH
battery pack thru the CHG Jack

Model GXT1000/1050/1191/1030 Series
PROBLEM SOLUTION
No Power - Check battery installation and/or replace batteries.
Cannot Receive
Messages - Confirm the radios have the same channel settings. - Make sure that you are within range of the other
transceivers.
- Buildings and other structures may interfere with
your communication.
(See ABOUT RANGE on Page 7)
Radio is not responding
to button presses - Make sure key lock is not on (See KEYPAD LOCK on Page 9).
- Radio might need to be reset. Turn radio off then
on.
Display is dim - Recharge or replace batteries.
Charger not functioning - Contacts on the back of the radio may require
cleaning.
- Ensure the outlet where the charger is plugged
in is functioning properly.
- Check that the battery pack is installed in the radio
properly.
USE AND CARE
1. Use a soft damp cloth to clean the radio
2. Do not use alcohol or cleaning solutions to clean the radio.
3. Do not immerse the radio in water.
4. Dry the radio with a dry lint-free cloth should it get wet.
5. Turn off the radio and remove the batteries during long-term
storage.
If you have a problem which you believe requires
service, please call first and speak with a service
technician at 816-241-8500. Many problems can be
remedied over the phone without returning the unit for
service.
TROUBLESHOOTING GUIDE
Page 14 www.midlandusa.com

Model GXT1000/1050/1191/1030 Series
Page 15 www.midlandusa.com
SPECIFICATIONS
Channels 50 GMRS/FRS Channels +142 Privacy Codes
10 NOAA Weather (WX) Band Channels
Operating Frequency UHF 462.5500 ~ 467.7125 MHz
Power Source 4 AAAlkaline or 6.0V Rechargeable NiMH battery pack
GMRS/FRS FREQUENCY CHART (MHz)
NOAA WEATHER (WX) RADIO FREQUENCY CHART (MHz)
CH. No CH. Freq. CH. No CH. Freq.
1 162.550 6 162.500
2 162.400 7 162.525
3 162.475 8 161.650
4 162.425 9 161.775
5 162.450 10 163.275
PRIVACY CODES FREQUENCY CHART (Hz)
Code Freq. Code Freq. Code Freq. Code Freq. Code Freq.
1 67.0 9 91.5 17 118.8 25 156.7 33 210.7
2 71.9 10 94.8 18 123.0 26 162.2 34 218.1
3 74.4 11 97.4 19 127.3 27 167.9 35 225.7
4 77.0 12 100.0 20 131.8 28 173.8 36 233.6
5 79.7 13 103.5 21 136.5 29 179.9 37 241.8
6 82.5 14 107.2 22 141.3 30 186.2 38 250.3
7 85.4 15 110.9 23 146.2 31 192.8
8 88.5 16 114.8 24 151.4 32 203.5
* Channel 8, 9 and 10 are designated Canadian Marine Frequencies
* Channels 8~14 are low-power FRS license free channels
Note: Privacy codes can be programmed for use on Channels 1~22 only
CH. No CH. Freq. CH. No CH. Freq. CH. No CH. Freq.
1462.5625 18 462.6250 35
2462.5875 19 462.6500 36
3462.6125 20 462.6750 37
4462.6375 21 462.7000 38
5462.6625 22 462.7250 39
6462.6875 23 40
7462.7125 24 41
8467.5625 25 42
9467.5875 26 43
10 467.6125 27 44
11 467.6375 28 45
12 467.6625 29 46
13 467.6875 30 47
14 467.7125 31 48
15 462.5500 32 49
16 462.5750 33 50
17 462.6000 34

Model GXT1000/1050/1191/1030 Series
Page 16 www.midlandusa.com
DCS PRIVACY CODE CHART
No. CODE No. CODE No. CODE
1 0 2 3
36 251
71 631
2 0 2 5
37 261
72 632
3 0 2 6
38 263
73 654
4 0 3 1
39 265
74 662
5 0 3 2
40 271
75 664
6 0 4 3
41 306
76 703
7 0 4 7
42 311
77 712
8 0 5 1
43 315
78 723
9 0 5 4
44 331
10 065
45 343
11 071
46 346
12 072
47 351
13 073
48 364
14 074
49 365
15 114
50 371
16 115
51 411
17 116
52 412
18 125
53 413
19 131
54 423
20 132
55 431
21 134
56 432
22 143
57 445
23 152
58 464
24 155
59 465
25 156
60 466
26 162
61 503
27 165
62 506
97 356
28 172
63 516
29 174
64 532
99 452
30 205
65 546
100 454
31 223
66 565
101
455
32 226
67 606
33 243
68 612
103 523
34 244
69 624
104 526
35 245
70 627
98 446
102
462
No. CODE
79 731
80 732
81 734
82 743
83 754
84 036
85 053
86 122
87 145
88 212
89 225
90 246
91 252
92 255
93 266
94 274
95 325
96 332
Note: Privacy codes can be programmed for use on Channels 1~22 only

Model GXT1000/1050/1191/1030 Series
Page 17 www.midlandusa.com
LIMITED WARRANTY
Midland Radio Corporation will repair or replace, at its option without
charge, any Midland FRS/GMRS transceiver which fails due to a
defect in material or workmanship within three years following the
initial consumer purchase.
This warranty does not apply to water damage, battery leak or abuse.
Accessories have a 90 day warranty from date of purchase, including
any antennas, chargers, or earphones.
This warranty does not include the cost of labor for removal or
re-installation of the product in a vehicle or other mounting.
For Product Purchased in the USA:
Performance of any obligation under this warranty may be obtained
by returning the defective product, prepaid freight, along with proof of
purchase to:
Midland Radio Corporation
Warranty Service Department
5900 Parretta Drive
Kansas City, MO 64120
This warranty gives you specific legal rights, and you may also have
other rights, which vary from state to state.
Note: The above warranty applies only to merchandise purchased in
the United States of America or any of the territories or possessions
thereof, or from a U.S. Military exchange.
For Product Purchased in Canada:
Performance of any obligation under this warranty may be obtained
by returning the warranted product, along with proof of purchase, to
your dealer in Canada.
This warranty gives you specified legal rights. Additional warranty
rights may be provided by law in some areas.

Page 18 www.midlandusa.com
Model GXT1000/1050/1191/1030 Series
AVP-11AVP-HH4
AVP-HH1 AVP-HH5
AVP-HH2 AVP-HH7
AVP-HH3 AVP-HH88
- 1 Open Face
Helmet
Microphone Kit
- $49.99
- 1 Closed Face
Helmet
Microphone Kit
- $49.99
- 2 Over the Ear
Mic. Headsets
w/ PTT
- $19.99
ACCESSORIES
Accessories can be purchased at www.midlandusa.com.
- 2 Surveillance
Headsets
- $39.99
- 2 Behind the
Head Headsets
- $39.99
- 2 Ear Wrap
Headsets
- $39.99
- 2 Mossy Oak
Around the Ear
Headsets with
Boom Mic
- $39.99
- 1 Action Throat
Mic with
Acoustic Ear
Tube
- $39.99

Page 19 www.midlandusa.com
Model GXT1000/1050/1191/1030 Series
TH1 TH2
TH3 TH4
AVP-77
- Earphone Mic
with Boom
- $39.99
- Earphone Mic
with PTT
- $29.99
- Tactical Action
Boom Mic with
Tactical PTT
- $99.99
- Action Throat
Mic with
Tactical PTT
and Pneumatic
Earphone
- $109.99
TACTICAL HHEADSETS
- 2 Rechargeable
battery packs
- $19.99

MMIIDDLLAANNDDRRAADDIIOOCCOORRPPOORRAATTIIOONN
5900 Parretta Drive
Kansas City, MO 64120
Call 816.241.8500
We’d love to hear from you! Let us know what you
think of your new Midland product at
or by visiting us at
www.midlandusa.com
Note: Features & Specifications are subject to change without
notice. MIDLAND is not responsible for unintentional errors or
omissions on its packaging. Rev D