Miele KF 1911 Vi Specification sheet

Operating and installation instructions
Frost free fridge freezer
with MasterFresh zone
and ice cube maker
KF 1801 Vi, KF 1811 Vi
KF 1901 Vi, KF 1911 Vi
To avoid the risk of accidents or
damage to the appliance, it is
essential to read these instructions
before it is installed and used for the
first time. M.-Nr. 09 169 460
en - GB, HK

Description of the appliance.........................................5
Caring for the environment..........................................7
Warning and Safety instructions .....................................8
How to save energy ...............................................13
Switching on and off ..............................................14
Switching on .....................................................14
Operation ........................................................14
Switching off .....................................................15
Settings mode ....................................................16
Switching off for longer periods of time .................................17
The correct temperature ...........................................18
...intherefrigerator and the MasterFresh zone .........................18
Dynamic cooling ..................................................18
...inthefreezer ..................................................18
Setting the temperature in the refrigerator/freezer zones ...................19
Temperature range ................................................19
Temperature (Fahrenheit/Celsius) ....................................20
Temperature display ...............................................21
Alarm...........................................................22
Super cool and Super freeze .......................................24
Super cool .......................................................24
Super freeze .....................................................25
Storing food in the refrigerator zone .................................26
Different storage zones .............................................26
Food which is not suitable for storing in a refrigerator.......................27
When shopping for food ............................................27
Storing food correctly ..............................................27
Unpacked meat and vegetables ...................................27
Storing food in the MasterFresh zone ................................28
Storage temperature ...............................................28
Humidity level ....................................................28
Storing food in the MasterFresh zone................................28
Arranging the interior fittings .......................................32
Moving the shelves ................................................32
Floating deli drawer ................................................32
The MasterFresh drawer ............................................32
Adjusting the door shelves/bottle shelf .................................33
Contents

To remove the shelf above the MasterFresh drawer .......................34
Small freezer basket ...............................................34
Large freezer basket with dividing panel ...............................35
Freezing and storing food..........................................36
Maximum freezing capacity..........................................36
Freezing fresh food ................................................36
Storing frozen food ................................................36
Home freezing ....................................................37
Defrosting .......................................................38
Cooling drinks ....................................................39
Making ice cubes .................................................40
Defrosting .......................................................42
Cleaning and care ................................................43
Before cleaning ...................................................43
Cleaning the interior and accessories ..................................43
Ice cube container.................................................44
Humidity filters ....................................................45
Ventilation gaps ...................................................45
Door seals .......................................................46
Problem solving guide ............................................47
Water filter ......................................................52
Reminder to change the water filter....................................52
To change the water filter ...........................................53
To confirm that the water filter has been changed ........................54
Using an external water filter .........................................54
Noises .........................................................55
After Sales / Guarantee ............................................56
Mains water connection ...........................................57
Notes on connecting to the mains water supply ..........................57
Preparing for plumbing the appliance into the mains water supply ...........57
Fitting the stainless steel hose to the appliance ..........................59
Electrical connection..............................................60
Installation advice ................................................61
Location .........................................................61
Floor ............................................................63
Door hinging .....................................................63
Contents

Adjoining furniture/units .............................................63
Ventilation .......................................................63
Side-by-side installation.............................................64
To limit the opening angle of the door ..................................65
Appliance door dimensions (opening angle 90°) .........................66
Appliance door dimensions (opening angle 115°) ........................66
Building-in dimensions ...........................................67
Installation ......................................................69
Tools and accessories required ......................................69
Weight of the door/drawer fronts ......................................70
Building into a peninsular run ........................................70
Building-in at the end of a run of units..................................70
Aligning the housing unit ............................................71
Checking the building-in niche .......................................71
Before installation .................................................71
Preparing the niche ................................................72
Installation accessories ..........................................72
Anti-tipping mechanism ..........................................73
An alternative anti-tipping mechanism ...............................75
Placing the appliance in the niche ....................................76
Aligning the appliance..............................................77
Securing the appliance in the niche ...................................78
Preparing the furniture fronts .........................................80
Securing and aligning the furniture door ................................82
Securing the covers................................................84
Fitting the plinth facing .............................................85
Fitting the air separator .............................................86
Contents

aAccess sensor
bSensor for selecting the refrigerator
zone
cSensor for selecting the left-hand
MasterFresh drawer
dSensor for selecting the right-hand
MasterFresh drawer
eSensor for selecting the freezer zone
fSensor for selecting the temperature
in the refrigerator or freezer zone
(Xfor colder; Yfor warmer)
gFood symbols for humidity levels in
the MasterFresh zone
(left: High humidity;
right: Low humidity)
hOn/Off sensor for the Super cool and
Super freeze functions
iOn/Off sensor for the ice cube maker
(only visible if the freezer zone has
been selected)
jSensor for switching off the
temperature or door alarm
(only visible when the temperature or
door alarm is sounding)
kReminder to change the water filter
Description of the appliance
5

aButter and cheese compartment
bAdjustable shelves
cDoor shelf
dFloating deli drawer
eControl panel
fHumidity filters for the MasterFresh
zone
gSwitch for switching the whole
appliance on and off
hMasterFresh zone
iice maker
jWater filter
kSmall freezer basket
lLarge freezer basket
mIce cube container
Description of the appliance
6

Disposal of the packing
material
The transport and protective packing
has been selected from materials which
are environmentally friendly for
disposal, and should be recycled.
Ensure that any plastic wrappings,
bags etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation!
Disposal of your old appliance
Electrical and electronic appliances
often contain materials which, if
handled or disposed of incorrectly,
could be potentially hazardous to
human health and to the environment.
They are, however, essential for the
correct functioning of your appliance.
Please do not therefore dispose of it
with your household waste.
Please dispose of it at your local
community waste collection / recycling
centre or contact your dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
Take care not to damage the pipework
at the back of it before or during
transportation to an authorised
collection depot.
In this way, refrigerant in the pipework
and oil in the compressor will be
contained, and will not leak out into the
environment.
Caring for the environment
7

This appliance complies with all
relevant safety requirements.
Improper use can, however, present
a risk of both personal injury and
material damage.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before installation and before using
it for the first time. They contain
important notes on installation,
safety, operation and maintenance.
Keep these instructions in a safe
place and pass them on to any
future owner.
,Warning!
This appliance is very heavy and
can tip forwards when the door is
open. Keep the appliance door shut
until the appliance has been built in
and secured in its housing in
accordance with these operating
and installation instructions.
Correct application
~This appliance is not designed for
commercial use. It is intended for use in
domestic households and in similar
working and residential environments
such as:
–Shops
–Offices and showrooms
and by residents in establishments
such as:
–Hostels and guest houses.
This appliance is not intended for
outdoor use.
This appliance is intended for domestic
use only for the cool storage of food
and drink as well as for storing deep
frozen food, freezing fresh food and for
preparing ice.
Any other usage is not supported by
the manufacturer and could be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation of the
appliance.
~This appliance can only be used by
people with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, if they are
supervised whilst using it, or have been
shown how to use it in a safe way and
understand the hazards involved.
Warning and Safety instructions
8

Safety with children
~This appliance is not a toy! Do not
allow children to play with it, for
example to play with the controls, to
climb inside the drawers or to swing on
the door.
~Children 8 years and older may use
the appliance only if they have been
shown how to use it in a safe way and
understand the hazards involved.
~Children under 8 years of age must
be kept away from the appliance unless
they are constantly supervised.
~The door hinges can cause injury.
Keep children well away at all times.
~Please bear in mind that by
removing the dividing panel in the large
freezer basket, children may be
tempted to climb inside. THIS COULD
PUT THEIR LIVES IN DANGER.
Technical safety
~Before setting up the appliance,
check it for any externally visible
damage. Do not install and use a
damaged appliance.
It could be dangerous.
~If the connection cable is faulty it
must only be replaced by a service
technician authorised by the
manufacturer to protect the user from
danger.
~This appliance contains the coolant
Isobutane (R600a), a natural gas which
is environmentally friendly. Although it
is flammable, it does not damage the
ozone layer and does not increase the
greenhouse effect. The use of this
coolant has, however, led to a slight
increase in the noise level of the
appliance. In addition to the noise of
the compressor, you might be able to
hear the coolant flowing around the
system. This is unavoidable, and does
not have any adverse effect on the
performance of the appliance.
Care must be taken during the
transportation and installation of the
appliance that no parts of the cooling
system are damaged. Leaking
refrigerant can damage the eyes.
In the event of any damage:
–avoid any flames or anything which
creates a spark,
–disconnect it from the mains,
–ventilate the room where the
appliance is located for several
minutes, and
–contact the Service Department for
advice.
Warning and Safety instructions
9

~The more coolant there is in an
appliance, the larger the room it should
be installed in. In the event of a
leakage, if the appliance is in a small
room, there is the danger of
combustible gases building up.
For every8gofcoolant at least 1 m3of
room space is required. The amount of
coolant in the appliance is stated on the
data plate inside the appliance.
~Safe operation of the appliance is
only assured if it has been installed and
connected in accordance with these
operating and installation instructions.
~Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and frequency)
matches the mains electricity supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
~Do not connect the appliance to the
mains electricity supply by a
multi-socket adapter or an extension
lead. These do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
~The electrical safety of this
appliance can only be guaranteed
when it is correctly earthed. It is most
important that this basic safety
requirement is observed and regularly
tested and where there is any doubt,
the household wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).
~Installation, maintenance and
repairs may only be carried out by a
suitably qualified and competent
person in strict accordance with current
national and local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable for
unauthorised work.
~While the appliance is under
guarantee, repairs should only be
undertaken by a service technician
authorised by the manufacturer.
Otherwise the guarantee will be
invalidated.
~The manufacturer cannot be held
liable for damage caused by a faulty
connection to the mains water supply.
~Connection to the mains water
supply and any repairs to the ice cube
maker must only be carried out by a
suitably qualified and competent
person.
~The ice cube maker is not suitable
for connection to a hot water supply.
~Before making plumbing
connections, ensure the appliance is
disconnected from the mains electricity
supply.
~Never tamper with the movable
components on the ice cube maker,
including the ice cube expulsion
mechanism or the element on the ice
cube maker.
Warning and Safety instructions
10

~The appliance must be isolated from
the electricity supply during installation,
maintenance and repair work.
~Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~This appliance must not be used in
a non-stationary location (e.g. on a
ship).
Correct use
~Never handle frozen food or the
metal parts of the appliance with wet
hands. Your hands may freeze to the
frozen food. Danger of frost burn and
injury.
~Do not operate any electrical
equipment (e.g. an electric ice-cream
maker) inside the appliance. Danger of
sparks and explosion.
~Do not take ice cubes out with your
bare hands and never place ice cubes
or ice lollies in your mouth straight from
the freezer.
The very low temperature of the frozen
ice or lollies can cause frost burn to the
lips and tongue.
~Do not refreeze thawed or partially
thawed food. Defrosted food should be
used up as quickly as possible as food
soon loses it nutritional value and goes
off. Defrosted food may only be
re-frozen after it has been cooked.
~Do not store explosive materials in
the appliance or any products
containing propellants (e.g. spray
cans). Thermostats switching on may
produce sparks which could present a
fire hazard. Flammable compounds
could explode.
~Do not store cans or bottles
containing carbonated drinks or liquids
which could freeze in the freezer. The
cans or bottles could explode. Danger
of injury and damage to the appliance.
~When cooling drinks quickly in the
freezer, make sure bottles are not left in
for more than one hour; otherwise they
could burst, causing injury or damage.
~Observe the "use-by" dates given on
food to avoid the risk of food poisoning.
Storage times will depend on several
factors, including the freshness and
quality of the food as well as the
temperature at which it is stored. Follow
the instructions given on the food
manufacturer's packaging regarding
storage conditions and "use-by" dates.
~Do not use sharp edged objects to
–remove frost and ice,
–separate frozen foods or remove ice
trays.
They will damage the evaporator,
causing irreversible damage to the
appliance.
~Do not place electric heaters or
candles in the appliance to defrost it.
These will damage the plastic parts.
Warning and Safety instructions
11

~Do not use defrosting sprays or
de-icers, as they might contain
substances which could damage the
plastic parts or which could cause a
build-up of gases and pose a danger to
health.
~Never use a steam-cleaning
appliance to defrost or clean this
appliance. Steam could reach the
electrical components and cause a
short circuit.
~If storing alcohol with a high
percentage proof, make sure it is tightly
closed and stored upright.
Danger of explosion.
~To avoid the risk of any potential
illness, do not deactivate the reminder
to change the water filter.
~Do not use any oils or grease on the
door seals, as these will cause the
seals to deteriorate and become
porous with time.
~If storing food which contains a lot of
fat or oil, make sure that it does not
come into contact with plastic
components as this could cause stress
cracks.
~Do not cover or block the air vents
as this could impair the efficiency of the
appliance, increase the electricity
consumption and could cause damage
to the appliance.
~This appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range
for your appliance is stated on the data
plate inside the appliance.
Installing it in a room with too low an
ambient temperature, e.g. a garage,
will lead to the appliance switching off
for longer periods so that it cannot
maintain the required temperature.
Disposal of your old appliance
~Before disposing of an old
appliance, first make the door latches
or locks unusable.
This way you will prevent children from
accidentally locking themselves in and
endangering their lives.
~Be careful not to damage any part of
the pipework whilst awaiting disposal,
e.g. by
– puncturing the refrigerant channels
in the evaporator.
–bending any pipework.
–scratching the surface coating.
Splashes of refrigerant can damage the
eyes.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.
Warning and Safety instructions
12

Normal energy
consumption
Increased energy
consumption
Installation site In a ventilated room. In an enclosed, unventilated room.
Protected from direct sunlight. In direct sunlight.
Not near to a heat source (radiator,
oven).
Near to a heat source (radiator,
oven).
Where the ideal ambient room
temperature is approx. 20°C.
Where there is a high ambient room
temperature.
Do not cover the ventilation gaps
and dust them regularly.
Temperature setting
with a thermostat
which is approximate
(set in stages).
With a medium setting of 2 to 3. With a high setting: the lower the
temperature in the compartment, the
higher the energy consumption.
Temperature setting
with a thermostat which
is exact to the degree
(digital display).
Larder section 8 to 12 °C
On appliances with winter setting,
please make sure that the winter
setting is switched off when the
ambient temperature is warmer than
16 °C .
Refrigerator section 4 to 5 °C
PerfectFresh zone just above 0 °C
Freezer section -18 °C
Wine storage section 10 to 12 °C
Use Drawers, shelves and racks
arranged as they were when the
appliance was delivered.
Only open the door when necessary
and for as short a time as possible.
Frequent opening of the door for
long periods will cause a loss of
coldness.
Store food in an organised way. Searching for an item will mean the
door is open for longer.
Allow hot food and drinks to cool
down before placing them in the
appliance.
Hot food will cause the compressor
to run for a long time, as the
appliance will have to work harder
to reduce the temperature.
Store food covered or packaged. The evaporation or condensation of
liquids will cause a loss of coldness
in the refrigerator.
Place frozen food in the refrigerator
to defrost.
Do not over-fill the appliance to
allow air to circulate.
Defrosting Defrost the freezer section when a
layer of ice 0.5 cm thick has built
up.
A layer of ice hinders the cold from
reaching the frozen food, and
increases energy consumption.
How to save energy
13

Before using for the first time
^Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for approx.
1 1/2 - 2 hours, or for approx. 8
hours if it has been transported on
its side to its final location before
connecting it to the mains.
Switching on
^Open the upper door.
^Press the rocker switch on the right
side underneath the control panel.
This switches all of the zones in the
appliance on or off together.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
The access sensor in the control panel
will also light up.
To enable the temperature to get
sufficiently cold inside the
appliance, allow the appliance to
run for a few hours before placing
food in it.
Do not place food in the freezer until
the temperature is at least -18°C.
Please note: Switching the
appliance off with the rocker switch
does not disconnect the appliance
from the mains.
Operation
A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Please note:
– A sensor which is available for
selection is always highlighted in
white.
–A sensor which has been selected is
always highlighted in yellow.
^Touch the access sensor so that it is
highlighted in yellow.
The sensors for the four zones in the
appliance will now appear in the control
panel: refrigerator zone, left- and
right-hand MasterFresh compartments
and freezer zone.
Switching on and off
14

The sensor for switching the ice cube
maker on and off will appear on the
right in the control panel (only visible if
the freezer zone has been selected).
This sensor will be highlighted in yellow
when the ice cube maker is in
operation.
To select settings for your appliance
(e.g. to set the temperature, etc),
^touch the sensor for the particular
zone of the appliance where you
would like to select the settings.
The applicable sensor will then be
highlighted in yellow, and depending
on the zone, further settings which may
be selected will now appear in the
display.
Depending on which zone you have
selected, you can
–adjust the temperature, or
–select Super cool and Super freeze
–adjust the humidity levels for the
MasterFresh zone
–switch on the ice cube maker.
Please refer to the relevant section for
more information.
To deselect a zone
^touch the sensor of the selected zone
again so that it is highlighted in white,
or select a different sensor.
To finish selecting settings,
^touch the access sensor so that it is
highlighted in white.
Your last selected settings will now be
saved to memory.
If you do not touch the access sensor,
the electronics for accessing the
settings will switch off after a period.
Switching off
^Press the rocker switch on the
right-hand side underneath the
control panel.
The cooling system and the lighting are
now switched off.
Switching on and off
15

Settings mode
You can select further settings in
settings mode.
You can also select certain appliance
functions via the control panel and
adjust the settings. The settings for the
different functions are described in
more detail in the relevant section of
these instructions.
Overview of functions that can be
selected in settings mode:
Function Symbol
To enter or leave settings
mode
;
To select the
temperature unit
(see "The correct
temperature")
†
No function selected ;
To switch the sensor tone
on/off (see "Switching on
and off")
=
No function selected ^
Switching the sensor tone on/off
The tone which sounds each time a
sensor is touched can be deactivated.
^Touch the access sensor to highlight
it in yellow.
^Touch the sensor for the refrigerator
zone so that it is highlighted in
yellow.
^Take note of the position of the X
sensor (but do not touch it!).
^Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^Place your finger in the position of the
Xsensor, and leave it there.
^At the same time, briefly touch the
access sensor (without moving your
finger from the Xsensor).
Switching on and off
16

^Leave your finger on the Xsensor for
another 4 seconds until cand the Y
sensor also appear in the display.
^Now touch the Xsensor repeatedly
until bappears in the display.
^Touch the access sensor again.
^By touching the Xsensor, you can
now select whether the sensor tone is
switched on or off:
=0: Sensor tone switched off
=1: Sensor tone switched on
=–: Return to menu
^After selecting a new setting, touch
the access sensor to confirm your
choice.
^Touch the Xsensor repeatedly until ;
appears in the display.
^Touch the access sensor.
You have now left settings mode.
The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^switch the appliance off,
^disconnect it from the mains,
^turn off the stopcock to the water
supply (a few hours before you
switch off the appliance),
^empty the ice cube container,
^clean the appliance out,
^replace the water filter and
^leave the doors ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door and
drawer are left shut, there is a
danger of mould and odours
building up inside the appliance.
Switching on and off
17

It is very important to set the correct
temperature for storing food in the
appliance. Micro-organisms will cause
food which is not stored at the correct
temperature to deteriorate rapidly.
Temperature influences the growth rate
of these micro-organisms. Reducing
the temperature reduces their growth
rate.
The temperature in the appliance will
rise:
–the more often the door is opened
and the longer it is kept open,
– the more food that is stored in it,
– the warmer the food is which is being
put into it,
– the higher the ambient temperature
surrounding the appliance.
The appliance is designed for use in
specific ambient temperatures
(climate ranges). Do not use in
ambient temperatures for which it is
not designed.
...intherefrigerator and the
MasterFresh zone
We recommend a temperature of 4°C
in the refrigerator.
The temperature in the MasterFresh
zone is controlled automatically and is
maintained at 1.5 °C.
Dynamic cooling
The dynamic cooling fan automatically
switches on when the cooling system
for the refrigerator switches on. It
distributes the temperature in the
appliance to all areas more evenly so
that all the food will be chilled to about
the same degree.
...inthefreezer
To freeze fresh food and to store frozen
food for a long time, a temperature of
-18 °C is required. At this temperature
the growth of micro-organisms is
generally halted. As soon as the
temperature rises above -10 °C, the
micro-organisms become active in the
food again so that it cannot be kept as
long. For this reason, partially defrosted
or defrosted food must not be re-frozen.
Food may be re-frozen once it has
been cooked, as the high temperatures
achieved when cooking destroy most
micro-organisms.
The correct temperature
18

Setting the temperature in the
refrigerator/freezer zones
The temperatures in the refrigerator and
freezer zones are set independently of
one another.
^Touch the access sensor so that it is
highlighted in yellow.
^Touch the sensor for the refrigerator
or freezer zone so that it is
highlighted in yellow.
^The temperature inside the appliance
can be selected by touching the
arrow sensors on either side of the
temperature display.
By touching the
Xsensor: the temperature will get
colder
Ysensor: the temperature will get
warmer.
The temperature range being set will
flash in the display as you do this.
–Touching the sensor once:
adjusts the temperature shown in
1 °C steps.
–Keeping your finger on the sensor:
changes the temperature
continuously.
If the highest or lowest temperature that
it is possible to set is reached, the Xor
Ysensor will disappear from the
display.
The temperature display on the
control panel always shows the
required temperature.
When you have adjusted the
temperature, wait for approx. 6 hours
if the appliance is not very full and
for approx. 24 hours if the appliance
is full before checking the temperature,
as it will take this long for the appliance
to reach the temperature. If, after this
time, the temperature is still too high or
too low, you will need to adjust it again.
Temperature range
The temperature can be adjusted:
– In the refrigerator zone from 2 °C to
8°C
–In the freezer zone from -14 °C to
-24 °C.
The ambient temperature in the
room and the installation location
can affect the time it takes for the
appliance to reach the lowest
temperature. If the ambient
temperature is too high, the
appliance may not reach the lowest
temperature.
The correct temperature
19

Temperature
(Fahrenheit/Celsius)
The temperature can be displayed in
degrees Celsius or degrees Fahrenheit.
^Touch the access sensor so that it is
highlighted in yellow.
^Touch the sensor for the refrigerator
zone so that it is highlighted in
yellow.
^Take note of the position of the X
sensor (but do not touch it!).
^Touch the access sensor until it is
highlighted in white and all of the
other sensors are no longer lit up.
^Place your finger in the position of the
Xsensor, and leave it there.
^At the same time, briefly touch the
access sensor (without letting go of
the Xsensor).
^Leave your finger on the Xsensor for
another 4 seconds until cand the Y
sensor also appear in the display.
^Now touch the Xsensor repeatedly
until †appears in the display.
^Touch the access sensor again.
^By touching the Xsensor, you can
now set the temperature to be
displayed in Fahrenheit or Celsius.
†0: Temperature in Fahrenheit
†1: Temperature in Celsius
†–: Return to menu.
^After selecting a new setting, touch
the access sensor to confirm your
choice.
^Now touch the Xsensor repeatedly
until cappears in the display.
^Touch the access sensor again.
You have now left settings mode.
The door alarm is automatically
disabled when the appliance is in
settings mode. As soon as the door
is closed, the door alarm is activated
again.
The correct temperature
20