MiFleet +Vision User manual

Camera Conguration Setup Guide
Part 1: Connecting your camera to local WiFi or Cellular Network.
Part 2: Calibrating video on camera
For more information, please visit our website www.MiFleet.us/support

Part 1: Connecting your camera to
local WiFi or Cellular Network
02
1. Open Google
Play store or iOS
App store.
2. Search for
“Veyes” app,
download app
and open.
3. Click Allow for
all Access rights
pop-ups.
4. Power on camera by connecting
black to ground, red to 12V power,
and yellow ACC wire to 12V power
(same as Red wire). If camera is
already installed, turn vehicle
ignition on.
6. Click on search to
nd and connect to
your camera. Select
the Camera’s serial
number, it should be a
10 digit number. If the
camera does not show
up immediately, click on
REFRESH button, until it
appears above.
For more information, please visit our website www.MiFleet.us/support
4. With the Veyes app open, power
on MiFleet + Vision, wait until the LED
changes from red to ashing green.
5. Connect mobile phone or tablet
to WiFi network on MiFleet + Vision
device WiFi signal.
NOTE: Device can generate WiFi AP signal after boot up, the SSID of this
WiFi signal is ST-xx by default. The xx stands for the serial number of the
device as shown above.
NOTE: The camera will take about 20 seconds to power up the software and broadcast WiFi. From here, you will have about 2 minutes to
connect to the camera before the WiFi turns o.

03
7. Username and Password
will auto ll, click on Login.
Username: admin
Password: admin
8. Once logged in, you
will be brought to the
General Tab, click on
the Preferences Tab.
9. Next, click on
Network Tab on
the left pane.
For Wi Devices continue to step 10.
For LTE Devices continue to step 11.
WIFI DEVICES ONLY
10. Click on the WiFi Tab, then ll in info for your Hotspot or WiFi network:
NOTE: Most networks will be WPA Encryption
Click on Save once complete.
LTE DEVICES ONLY
11. Select the Communication Module Tab.
Enter in your APN information, if required enter Username and Password as
well, then scroll down and Click Save.
12. Click on the Menu Icon (3 dots) in the top right and select Logout
PLEASE NOTE:
13. Device is ready to use. Please turn vehicle ignition o, wait 1 minute then turn the
ignition back on. Your device will now show in MiFleet + Vision platform. If you need
to calibrate video, please continue to Part 2. If not, you may now un-install the app, it
is not needed for further use.
For more information, please visit our website www.MiFleet.us/support

Part 2: Calibrating Video on Camera
04
1. With the Veyes app open, power on MiFleet + Vision,
wait until the LED changes from red to ashing green.
2. Connect mobile phone or tablet to WiFi network on
MiFleet + Vision device WiFi signal.
To calibrate the video on your camera, you can use the Veyes
app, or your platform.
NOTE: Device can generate WiFi AP signal after boot up, the
SSID of this WiFi signal is ST-xx by default. The xx stands for the
serial number of the device as shown above.
MiFleet + Vision device WiFi AP signal will stay 3 minutes after boot up, if nothing connects to the
WiFi within 3 minutes after boot up, then device will switch o. If device shuts o the SSID will
disappear and you will have to reboot device. Log into Veyes app interface click on the Preview Tab.
Default user:
Name: admin Password: admin
For more information, please visit our website www.MiFleet.us/support

05
1. Log into your MiFleet Account using
your personal MiFleet user name and
password.
2. Click on the squares in the top right
hand corner of your screen to access
your applications.
3. Click on MiFleet + Vision icon that
brings you to the MiFleet + Vision
platform (left bottom).
4. Adjust lens front to back and side to
side for both exterior facing camera and
interior facing camera. Make sure you
can see all the drivers position in the
interior camera and see all road with the
exterior facing camera.
Adjust external facing camera with wrench
and screw on device to properly see exterior
surroundings. Play the video of channel 1 on
MiFleet + Vision device through the Veyes
Application. Adjust lens up and down until
screen is at optimal viewing. Complete same
steps for internal facing camera.
For more information, please visit our website www.MiFleet.us/support