MiFleet +Vision User manual

MiFleet + Vision Quick Start Guide
Full HD Dual Camera - Dash Cam Solution
Camera Setup
Adjusting Camera View:
1. Adjust front and rear facing cameras with provided
star torque wrench and camera screws on device by
loosening screw and moving camera front to back.
2. Login to your MiFleet account by going to:
https://login.mieet.us/
3. Use your MiFleet username and password to log in
to your MiFleet account. This may be your company
MiFleet account username and password.
4. Select on your apps icon in the upper right corner.
5. MiFleet + Vision App will appear in your apps
section on your MiFleet account. (Fig. 7)
6. Select MiFleet + Vision icon as shown.
7. Once in MiFleet + Vision, click on LiveView >
Monitoring located in upper left corner of screen to
see your live streaming video. You can now make
any nal adjustments before tightening screws to
hold camera in place.
Fig. 7
Additional documentation and support is available at:
mieet.us/mieet-vision-support| support@mieet.us | 866.MiFleet Option 2

WiFi Only Install LTE / WiFi
NOT USED
OPTIONAL REAR
FACING CAMERA
GPS ANTENNA
NOT USED
IGNITION ON - Yellow Wire
GROUND - Black Wire
POWER IN CONSTANT 12V - Red Wire
NOT USED
OPTIONAL REAR
FACING CAMERA
GPS ANTENNA
4G ANTENNAS
NOT USED
IGNITION ON - Yellow Wire
GROUND - Black Wire
POWER IN CONSTANT 12V - Red Wire
PLEASE NOTE: We highly suggest that you have a professional installer
preform these steps to insure accuracy with device installation and furthermore to
ensure vehicle health upon completion of installation. MiFleet or it’s aliates are NOT
RESPONSIBLE for any damage to any vehicle with installed equipment.
INSTRUCTIONS ARE FOR BOTH FRONT AND REAR FACING CAMERA SETUP.
1. Clean windshield - DO NOT SKIP STEP
2. Mount both front and rear facing cameras by pealing o
3M sticky tape on the back and applying cameras gently to
windshield in desired location.
3. Neatly tuck hard wiring cables under roof liner on interior
vehicle roof fabric over to driver side door.
4. Bring cables down through back side of dashboard
paneling down to reach vehicle fuse box. (Fig. 5)
5. Connect device power to proper fuse connections; black to
ground, red to 12V power, and yellow to ACC 12V ignition.
6. Mount GPS module to dashboard by pealing o the
3M sticky tape and press rmly.
7. Bring cable up left side of vehicle and tuck behind
interior lining.
8. Device is now installed into vehicle, please continue
to adjust camera lens (reverse side).
PLEASE NOTE: We highly suggest that you have a professional installer
preform these steps to insure accuracy with device installation and furthermore to
ensure vehicle health upon completion of installation. MiFleet or it’s aliates are NOT
RESPONSIBLE for any damage to any vehicle with installed equipment.
INSTRUCTIONS ARE FOR BOTH FRONT AND REAR FACING CAMERA SETUP.
1. Clean windshield - DO NOT SKIP STEP
2. Mount both front and rear facing cameras by pealing o 3M sticky
tape on the back and applying cameras gently to windshield in
desired location.
3. Neatly tuck hard wiring cables under roof liner on interior vehicle roof
fabric over to driver side door.
4. Bring cables down through back side of dashboard paneling down to
reach vehicle fuse box. (Fig. 6)
5. Connect device power to proper fuse connections; black to ground,
red to 12V power, and yellow to ACC 12V ignition.
6. On right side of windshield mount 4G antennas. Peal the 3M sticky
tape o the back side and rmly stick antennas to windshield.
7. Tuck antenna cords under interior lining on roof just like in step 3.
8. Mount GPS module to dashboard by pealing o the
3M sticky tape and press rmly.
9. Bring cable up left side of vehicle and tuck behind interior lining.
10. Device is now installed into vehicle, please continue
to adjust camera lens (reverse side).
GPS Module
Front Facing Camera
Note: tuck camera behind rear
view mirror for easy visibility.
Rear View Mirror
Rear Facing Camera
GPS Module
Front Facing Camera
Note: tuck camera behind rear
view mirror for easy visibility.
Rear View Mirror
4G Antennas
Rear Facing Camera
Item Name Application Total
Parts
Front facing
camera Camera faces exterior trac 1 pcs
Optional rear
facing camera
Camera faces interior of vehicle,
generally pointed at driver 1 pcs
4G Antenna
(Only available for
LTE device)
Communication antenna to
amplify signal and GPS function 2 pcs
External GPS
Antenna
Used for obtaining GPS location
of vehicle at all times 1 pcs
10 PIN Power
Cable
Power input cable with PB
alarm input 1 pcs
2 Lens Wipes To clean your camera lenses 2 pcs
Wrench Used to open or close SIM door 1 pcs
LENS CLEANING
W I P E
1. Remove all contents from box.
2. Verify all box contents from inventory list. (Fig. 1)
3. Open side panel of front facing camera using star
torque wrench.
4. Verify SIM & SD card are inserted correctly. (Fig. 2)
5. Verify all connections are tight and correct.
(Fig. 3 WiFi Only & Fig. 4 LTE / WiFi)
SIM card slot,
insert face down.
SD card slot,
insert face down.
Fig. 2
Items Included in the Box
Fig. 1
Wiring Conguration (Fig. 3)
Wiring Conguration (Fig. 4)
Continue...
Fig. 5
Fig. 6