MIGEL GGS 100 User manual
1
GGS 100
- GGS 100
2
3
4
5
6
7
0
8
9
1
English
GGS 100
Dear customer!
Thanks for your worthful choce and confdence to Mgel
brand. We really hope that you enjoy operatng ths product.
TECHNICAL DATA
Model Power Frequency Voltage
GGS 100 840-1000 W 220-240 V 50/60 Hz
IMPORTANT SAFEGUARDS
1. Read all the instructions carefully before using this appliance and keep
this instruction for future refrence.
2. Yor voltage of your electrical source must correspond to that of the
appliance(AC 220-240V,50/60Hz).
3. To reduce the risk of electric shock , do not immerse the appliance, plug ,
or power cord in water or other liquids.
4. To disconnect , remove plug from mains socket, never pull the cable, and
please hold the plug.
5. Do not ll the water tank with hot water or any other corrosive cleaner as
this may damage the appliance, only use demineralised water or distilled
water.
6. When the item is not in use, please drain the water reservior; then turn
on the unit again, wait until the steam stop spraying out to empty the
water reservior completeley and then shut down your machine and power
it down.
7. Do not operate the appliance when the cable or appliance is damaged.
To avoid the electric shock and hazard, do not attempt to disassmbleor
repair the appliance by yourself;Please contact with our qualied
electrician for help.
8. Do not leave this appliance unattached while it is in operation.It is not
intended for use by children or near children.Using the appliance alone by
elder is not allowed.
9. Contacting the steam or the steamer panel may cause scald.Be cautious
about steamer in upside down position, for it may cause hot water
discharge.
10. Be cautious about the steam spraying out from the nozzle. Do not
direct steam at people or animals to avoid being injured.
11. It is not intended for use by persons whose physical, sensory or mental
capabilities or lack of experience and knowledge prevents them from using
the appliance safely without supervision or instruction by a responsible
Device description
Filling water
2
person to ensure that they can use the appliance safely.In order to avoid
children use them as toys,whole-process supervision is necessary when
child is using the appliance.
12. Do not operate the appliance when it runs out of water.
13. After the handheld steamer cooled down completely, coiled the cord
and store well.
14. To avoid electric shock,when the power cord of the appliance is
damaged,please contact with manufacturer, facilitator or licensed
professionals to get exchange.
36. Please ensure all parts are correctly tted before using the product.
37. Do not use your steam cleaner if damaged/faulty.
Note: The liquid or steam must not to be directed towards equipment containing
electrical components, such as the interior of ovens.
This steamer is for household use only and NOT for commercial or industrial use.
1. Unplug the appliance during lling. Hold the two sides of the water tank
and push
downward, and take the water tank out of the main body(as Fig 1).
2. Take out the water tank over, and ll the water tank with water(as Fig
2,3,4).
3. Replace the water tank(as Fig 5).
Caution: Only use distilled water or puried water. Do not use tap water.
1. Indicating Light
2. Main Body
3. Steam Control Button
4. Decoration
5. Power Cable Cover
6. Fabric Brush
7. Steam Panel
8. Water Tank
9. Filter
3
1. Fabric Brush Assembly
1.1 Unplug the appliance,and wait until the steam stops spraying.
1.2 Press the brush to the Steam Nozzle to lock in place.
2. Fabric Brush Disassembly
2.1 After nishing steaming, unplug the appliance.
2.2 Hold the two sides of the fabric brush and pull it out gentally.
1. Add water to the water tank before using the appliance.
2. Connect the appliance to an earthed wall socket.
3. Plug in the appliance, then the indicating light will illuminate, and the
appliance starts to work. Steam will come out in 30 seconds, then the
appliance is ready to use.
4. T h e c o n t r o l b u t t o n h a s 3 d i e r e n t o p t i o n s .T h e y a r e a s f o l l o w s :
This is th e steam Off setting.
T h i s i s s t e a m s e t t i n g 1 . T h i s s e t t i n g i s s u i t a b l e f o r t h i n n e r a n d
m o r e d e l i c a t a f a b r i c s s u c h a s s i l k .
T h i s i s s t e a m s e t t i n g 2 . T h i s i s s u i t a b l e f o r m o r e r o bustfabrics
s u c h a s c o t t o n ; l i n e n , d e n i m e t c .
Fabric brush assembly and disassembly
Steaming instructions
4
6. It is very easy to use the appliance. Hold the garment or fabric material
with one hand, and hold the appliance with the other to steam.
Removing wrinkles from collars
Hold the collar with one hand, and hold the appliance with the other to
steam (Fig 7).
Removing wrinkles from the back of collars
Hold the back of the collar with one hand, and hold the appliance with the
other to steam (Fig 8).
Removing wrinkels from the shirt front
Moving the appliance vertically (Fig 9).
Removing wrinkles from pockets
Hold the shirt with one hand, move the appliance verically (Fig 10).
Removing wrinkles from the shirt back
Move the appliance vertically (Fig 11).
Removing wrinkles from the shirt sleeves
Hold the sleeve with one hand, move the appliance horizontally (Fig 12).
7. When the water tank runs out of water,unplug the appliance, take out
the water tank and rell it. Then turn on the steam control button and
steam will come out.
Caution:
1. The high temperature steam spraying from the steam panel can reach
180°C,check before steaming that the material is high-temperature
resistant or not. Do not leave the spraying panel on the same spot for a
5
long time, to avoid damage the garment.
2. When not using the appliance and before storing, continune to steam
till the water tank runs out of water and no steam comes out from the
steam panel, then unplug the appliance (If the appliance is turned o while
the steam panel still sprays steam, it may cause scalding injury to people
because there is still water left in the water tank and the appliance is still
hot, and a little amount of steam will spray).
3. Before storing, continue to steam till no steam sprays out from the steam
panel and wait until the appliance has completely cooled down.
CLEAN & MAINTANENCE
TROUBLE SHOOTING
1. This appliance do not cost fee for maintanence, nor need any cleaning
agent. If the appliance shows visible damange or can not work, please
send it back to service centre for repair, do not attempt to dissassemble the
appliance or repair by yourself.
2. Before cleaning, unplug the appliance and wait till it cools down
completely.
3. Finish using the water in water tank or pull out the water in the water tank.
4. Do not put the appliance in water. Use dry clean cloth to dry the
appliance, no special cleaning agent is needed.
5. Make sure the main body is dry before storage or packing.
Problem Reason Solution
The unit fails to steam.
Indicating lamp does not
illuminate.
The unit did not plugged in. Plug into electrical outlet
Household power
system problem/ fuse is
blown.
Reset the circuit outlet or
contact a qualied
electrician for help.
The unit fail to steam,but
indicating lamp
illuminates.
The water tank runs out
of water.
Rell the water tankTurn
on the appliance
The switch has not
turned on.
Water drops on water
panel
Condensed water come
out when the machine is
working.
Continue to use and the
condensed water will
disappear.
Water spray from the
steam panel
Preheating is not enough
for the rst time
Water does not spray
when
the appliance is used for
the second time.
Table of contents
Languages:
Other MIGEL Steam Cleaner manuals
