MIKO IBUKI MA-01 User manual

IBUKI Air Enhancer
User Manual
MODEL NO: MA-01
SHOPMIKO.COM

IBUKI Air Enhancer
Packing List
No Item Model No. Unit Q’ty Remarks
1 Device PC 1
2 Manual PC 1
3Aroma
Cotton PC 3
4 Filter PC 1
Pls remove
the plastic
bag before
use.
Contents
Safety Precautions ............................................. 1
Component Description...................................... 2
Preparation Before Use ...................................... 3
Product Troubleshooting .................................... 5
Power cord Considerations ................................. 6
Maintenance...................................................... 7
Replace Filter..................................................... 8

21
Safety Precautions
Thank you for using our desktop air purifier. In order to better read this
manual and use the desktop air purifier, here is an explanation of the glyphs
that appear in the manual:
Anything with this mark must be
absolutely prohibited, otherwise
it may cause damage to the
machine or endanger the safety
of the user.
For the contents bearing the logo,
the safety of the product and the
personal safety of the user must
be strictly in accordance with the
contents of the warning.
!
Do not use solvent-based desktop air purifiers such as alcohol or thinner.
Do not place the desktop air purifier in a place where flammable gas is easily leaked to prevent
a gas leak and cause a fire. Do not use in a flammable, explosive or corrosive atmosphere.
Do not pull on the power cord while moving or storing.
Do not touch the power cord plug with wet hands.
Please supervise and guide young children to avoid direct operation or contact
with desktop air purifiers.
Do not put your fingers or metal objects in the gaps between the air inlet and the air outlet. Do
not allow volatile substances or combustible materials, such as cigarettes, to float into the unit.
There is an electric control board on the base, keep away from water.
The air intake is located on the base of the unit. The air outlet is at the top of the unit.
Please do not block or obstruct the air intake or outlet.
Do not use the power cord or plug if it is damaged. Do not touch the power cord with wet
hands.
Regularly check and replace the filter. If the filter is blocked, the air will be ineffective and the
power consumption will increase, causing malfunction.
When not in use for a long time, please turn off the power and avoid exposure to sunlight.
When moving or performing maintenance on the air purifier, be sure to stop
the operation and unplug the power cord.
If the machine fails, stop using it and turn off the power. First, follow the instructions for
troubleshooting. If it can’t be corrected, please contact the after-sales personnel for inspection.
Components Description
Air outlet
Aroma module
Air intake
Filter
Touch panel
Filter cover

43
Preparation Before Use
Aromatherapy box / filter installation (make sure to do before the power plug
is plugged into the socket)
1. Disassemble the filter cover at the bottom
of the air intake. Place it on the bottom
of the filter cover with your hand, press
firmly with a little force, turn left in the
direction indicated by the arrow to remove
the bottom cover. (Automatically cut off the
power after opening the bottom filter cover)
2. Remove the filter containing the PE bag.
The filter has been placed in the purifier.
Grab the bag of the filter by hand and
take out the filter.
3. Take the filter
out of the plastic
bag.
4. Install the filter.
(1) Install the filter that has removed the
plastic bag into the machine.
(2) After closing the filter cover, turn it to the
right to lock it.
5. Install the aromatherapy box.
Aromatherapy box is already installed in this
unit. If you need to add or replace essential
oil, please take it out. Then in the following
order, first put the aromatherapy box into
the machine. (Please pay attention to the
installation direction)
Touch button operation + display instructions
Filter reset switch
Timer switch
High speed indicator
Medium speed indicator
Low speed indicator
Power
When the power is turned on for the first time, the buzzer will beep and all the display buttons will
light up and the indicator will go out
Power button
In the standby mode, tap the “Power” button
and the machine enters the power on state.
After the power is turned on, the wind speed
defaults to low-level operation, and the
corresponding function indicator lights.
In the power on state, press and hold the
“Power” button for 2 seconds to enter the
standby mode.
Wind speed gear button
In the power-on state, the default wind speed
is low. If you need to switch the wind speed,
you can touch the “Power” button.
Each time the “Power” is tapped, the wind
speed gear is continuously selected by low
speed, medium speed, high speed and
low speed.
Timer
1.When the power is on, press “Timer”
button, the Timer indicator light is twinkling
to show the machine will be off in 4 hours.
Press “Timer” button, the Timer indicator
light is on to show the machine will be off
in 8 hours. Press “Timer” button, the Timer
indicator light is off to show that timer is
canceled.
Filter reset
When the purifying filter replacement
reminder light is on, please turn off the
power and replace the purifier filter. After the
replacement is completed, press and hold
the “Reset” button for 2 seconds, the buzzer
will sound once, the replacement reminder
will reset, and the reminder light will go out.
Aromatherapy module
After removing the aromatherapy cover, the
aromatherapy block can be taken out and
the essential oil can be dripped, and the
essential oil will be evenly distributed with
the air flow.

6
Product Troubleshooting
Fault Checklist Possible Solution
Machine
not working
The power is not on Power it on
Power plug is loose or
not plugged in
Pull out the plug and plug
in again
Peculiar smell
from air outlet
The filter has absorbed
too much odor or dust Change the filter
Bad
performance
Indoor air is too dry Increase indoor humidity
appropriately
There’s not enough
space around machine
Change placement,
Remove obstacles
No air is
blowing out
There is something
blocking the outlet
or intake or filter’s
packing bag is not
removed
Clear space around the
unit, and remove the filter’s
packing bag
Power cord Considerations
• Do not use power beyond the rated voltage( 110V 60Hz)
(Otherwise it may cause fire and electric shock and so on.)
• Do not process the power line arbitrarily, bend the power line
forcibly, draw, twist and bundle up the power line.
• Do not let the power line approach high temperature objects.( If
the power line is worn, fire and electric shock may occur.)
• Do not put heavy objects on it or press. (Overloading may cause
fire and/or electric shock.)
• Do not use when the power line or power plug is worn and loose.
(Otherwise it may cause fire, electric shock, short circuit and
so on.)
• Do not insert and pull the power line with wet hands. (Otherwise it
may cause electric shock and so on.)
• Do not change the power line without permission. When
necessary, please contact our consumer service center.
• Clean regularly the dust on the power plug and socket.(Too much
dust and moisture may cause defective insulation. Then fire and
electric shock may occur.)
Non-authorized personnel should not dismantle the machine without
permission in case of electric shock danger. Pls pull out the power
plug when changing or cleaning the filter set. In case of failure,
please follow the troubleshooting method in the manual. If failier not
resolved, please contact our support centre.
Warning
!
5

87
Maintenance
For best results and long unit life, please keep regular preventative
maintenance.
During maintenance, checked or moved, please stop running the unit and
pull the power plug. Pls do not use wet hand to plug in or pull out the power
plug. Otherwise it may cause electric shock and injury.
Main body – Once a month
Pls use soft cloth to clean the surface of air
purifier’s body. If smudge is serious, pls use
warm wet cloth or neutral detergent to clean,
then wipe with dry cloth
Attention
• Do not use too hot water
(higher than 40°C).
• It may cause fade deformation.
• Do not use insecticide or other chemical
detergent. Never wash the air purifier’s
body with water.
Filter
There’s one filter inside the machine which
can not be washed.
Change the filter every three months. New
filter could be purchased from shopmiko.
Long idle time
1 Pull out the power cord.
2. Cover the machine with a plastic bag and
place it in a dry place for safekeeping
3 Do not store the product upside down
which may lead to product failure.
Replace lter
The machine should be unplugged on the following
maintenance steps.
!
1. Remove the PE bag
When using the air purifier for the first time,
please open the bottom cap of air purifier to
take out the filter and make sure to remove
the plastic bag from the filter. Otherwise
the product will not be able to purify the air
normally.
* Keep the plastic bag away from infants to
avoid the accident.
figure A figure B figure C
2. Clean or change the filter
1) Take the filter out from air purifier as
shown in figure A.
2) Remove the packing bag of new filter as
shown in figure B.
3) Put the new filter inside the machine and
rearrange the bottom cap as shown in
figure C.
4) Plug in the power cord and turn on the
machince. Long pressing the FILTER
RESET button for 2s. The filter reset
indictor light will be off which means it’s
reset successfully.
figure A figure B figure C
Figure A Figure B Figure C