MikroTik CRS328-4C-20S-4S+RM User manual

CRS328-4C-20S-4S+RM
Quick start
•Mount unit in a rackmount cabinet or place on the flat surface (see “Mounting”).
•Connect two powering units to the AC source using power cords.
•The Initial connection has to be done ia the Ethernet cable, using the MikroTik Winbox utility.
•Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin
and no password.
•We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest
ersion to ensure the best performance and stability.
•Set up your password to secure the de ice.
Powering
•The de ice accepts powering from two IEC connectors. AC input range 100-240 V .⏦
The power consumption under maximum load can reach 43 W.
Booting process
The de ice supports booting RouterOS (for routing and switching configuration) or SwOS (for only using as a
switch). By default, the de ice will boot RouterOS, but you can reboot into the other operating system in the
following ways:
•From SwOS: In the System menu, click the “Boot RouterOS” button on the bottom of the page.
•From RouterOS: in the System, RouterBOARD menu, click “Settings” and there select “Boot OS”.
It is also possible to select the OS and configure other boot settings ia the serial console menu.
Configuration
Full RouterOS and SwOS documentation is located here: http://mt.l /help
This de ice is not preconfigured other than an IP address on the bridge interface. You can connect from any port,
as all ports are switched together by default. Another configuration has to be applied according to the
documentation manual linked abo e.
The Initial connection has to be done ia the Ethernet cable, using the MikroTik WinBox utility. WinBox should be
used to connect to the default IP address of 192.168.88.1 from any port, with the username admin and no
password.
For reco ery purposes, it is possible to boot the de ice for reinstallation, see Buttons and jumpers.
In case the IP connection is not a ailable, the WinBox utility can also be used to connect to the MAC address of the
the de ice. Applies only when de ice has booted RouterOS.
The de ice is equipped with an RJ45 serial port, set by default to 115200 bit/s, 8 data bits, 1 stop bit, no parity.
Standard RJ45 to COM cable can be used, pinout can be found here: http://mt.l /console
E tension slots and ports
•20 SFP ports.
•4 SFP+ ports, which accept both 1.25 Gb SFP and 10 Gb SFP+ modules.
•4 combo ports, consisting of four twisted pair (T) sockets and four SFP sockets (F).
•RJ45 serial port.
Please isit wiki pages for MikroTik SFP module compatibility table:
https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
See mikrotik.com/products for the latest ersion of this document. Page 1, Document #52503 Modified on: 07.OKT.2019

Combo ports
The four combo interfaces each ha e two physical connectors of which the only one can be used at the same time.
The ports will be automatically represented as combo1-4 in the RouterOS. It is possible to select which physical
port will be used in RouterOS software Ethernet menu. If left to default “auto”, and both F/T ha e cables plugged in,
SFP will take priority. For example, if you ha e plugged an Ethernet cable into the 1T port and an SFP module in
the 1F port, you will ha e to choose in RouterOS which one to use. Double click the respecti e combo interface in
RouterOS GUI to see which socket is used.
Mounting
The de ice is designed to use indoors and it can be mounted in a rackmount enclosure using pro ided rack
mounts, or it can be placed on the desktop. Please attach rubber pegs on the bottom of the router if the desired
placement is on the flat surface or use a Phillips screwdri er to attach rackmount ears on both sides of the de ice if
designated use is for rackmount enclosure:
1. Attach rack ears to both sides of the de ice and tighten four screws to secure them in place, as
shown in the picture.
2. Place the de ice in a rackmount enclosure and align with the holes so that the de ice fits
con eniently.
3. Tighten screws to secure it in place.
The IP rating scale for this de ice is IPX0. The de ice has no protection from water contamination, please ensure
the placement of the de ice in a dry and entilated en ironment.
Mounting and configuration of this device should be done by a qualified person. We recommend using Cat6 cables
for our devices.
See mikrotik.com/products for the latest ersion of this document. Page 2, Document #52503 Modified on: 07.OKT.2019

Buttons and jumpers
Reset button
•Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS
configuration (total 5 seconds).
•Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD
look for Netinstall ser ers (total 15 seconds). The first Ethernet port is used for the Netinstall process. See
RouterOS documentation about using the Netinstall reco ery utility.
Regardless of the abo e option used, the system will load the backup RouterBOOT loader if the button is pressed
before power is applied to the de ice. Useful for RouterBOOT debugging and reco ery.
Mode button
The action of the mode button can be configured from RouterOS software to execute any user-supplied RouterOS
script. For configuration, use the menu /system routerboard mode-button
Specifications
For more information about this product, specifications, pictures, downloads and test results please isit our web
page: https://mikrotik.com/product/crs328_4c_20s_4s_rm
Operating system support
The de ice supports dual boot SwOS software ersion 2.9 and RouterOS 6. The specific factory installed ersion
number is indicated in the RouterOS menu /system resource. Other operating systems ha e not been tested.
See mikrotik.com/products for the latest ersion of this document. Page 3, Document #52503 Modified on: 07.OKT.2019

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital de ice, pursuant to Part 15
of the FCC Rules. These limits are designed to pro ide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. Howe er, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or tele ision reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
•Reorient or relocate the recei ing antenna.
•Increase the separation between the equipment and recei er.
•Connect the equipment into an outlet on a circuit different from that to which the
recei er is connected.
•Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly appro ed by the party responsible for compliance could
oid the user’s authority to operate this equipment.
This de ice complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
de ice may not cause harmful interference, and (2) this de ice must accept any interference recei ed, including
interference that may cause undesired operation.
Note: This unit was tested with shielded cables on the peripheral de ices. Shielded cables must be used with the
unit to ensure compliance.
Industry Canada
This de ice complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this de ice may not cause interference, and (2) this de ice must accept any interference,
including interference that may cause undesired operation of the de ice.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions sui antes: (1) l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
See mikrotik.com/products for the latest ersion of this document. Page 4, Document #52503 Modified on: 07.OKT.2019

CE Declaration of Conformity
Manufacturer: Mikrotikls SIA, Bri ibas gat e 214i Riga, Lat ia, LV1039.
BG С настоящото Mikrotīkls SIA декларира, че този тип радиосъоръжение RouterBOARD е в съответствие с Директива 2014/53/ЕС.
Цялостният текст на ЕС декларацията за съответствие може да се намери на следния интернет адрес: https://mikrotik.com/products
CS Tímto Mikrotīkls SIA prohlašuje, že typ rádio ého zařízení RouterBOARD je souladu se směrnicí 2014/53/EU. Úplné znění EU prohlášení o
shodě je k dispozici na této interneto é adrese: https://mikrotik.com/products
DA Hermed erklærer Mikrotīkls SIA , at radioudstyrstypen RouterBOARD er i o erensstemmelse med direkti 2014/53/EU. EU-
o erensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: https://mikrotik.com/products
DE Hiermit erklärt Mikrotīkls SIA , dass der Funkanlagentyp RouterBOARD der Richtlinie 2014/53/EU entspricht. Der ollständige Text der EU-
Konformitätserklärung ist unter der folgenden Internetadresse erfügbar: https://mikrotik.com/products
EL Με την παρούσα ο/η Mikrotīkls SIA , δηλώνει ότι ο ραδιοεξοπλισμός RouterBOARD πληροί την οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της
δήλωσης συμμόρφωσης ΕΕ διατίθεται στην ακόλουθη ιστοσελίδα στο διαδίκτυο: https://mikrotik.com/products
EN Hereby, Mikrotīkls SIA declares that the radio equipment type RouterBOARD is in compliance with Directi e 2014/53/EU. The full text of the
EU declaration of conformity is a ailable at the following internet address: https://mikrotik.com/products
ES Por la presente, Mikrotīkls SIA declara que el tipo de equipo radioeléctrico RouterBOARD es conforme con la Directi a 2014/53/UE. El texto
completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: https://mikrotik.com/products
ET Käesole aga deklareerib Mikrotīkls SIA , et käesole raadioseadme tüüp RouterBOARD astab direktii i 2014/53/EL nõuetele. ELi
asta usdeklaratsiooni täielik tekst on kättesaada järgmisel internetiaadressil: https://mikrotik.com/products
FI Mikrotīkls SIA akuuttaa, että radiolaitetyyppi RouterBOARD on direktii in 2014/53/EU mukainen. EU- aatimustenmukaisuus akuutuksen
täysimittainen teksti on saata illa seuraa assa internetosoitteessa: https://mikrotik.com/products
FR Le soussigné, Mikrotīkls SIA , déclare que l'équipement radioélectrique du type RouterBOARD est conforme à la directi e 2014/53/UE. Le
texte complet de la déclaration UE de conformité est disponible à l'adresse internet sui ante: https://mikrotik.com/products
HR Mikrotīkls SIA o ime izja ljuje da je radijska oprema tipa RouterBOARD u skladu s Direkti om 2014/53/EU. Cjelo iti tekst EU izja e o
sukladnosti dostupan je na sljedećoj internetskoj adresi: https://mikrotik.com/products
HU Mikrotīkls SIA igazolja, hogy a RouterBOARD típusú rádióberendezés megfelel a 2014/53/EU irányel nek. Az EU-megfelelőségi nyilatkozat
teljes szö ege elérhető a kö etkező internetes címen: https://mikrotik.com/products
IT Il fabbricante, Mikrotīkls SIA , dichiara che il tipo di apparecchiatura radio RouterBOARD è conforme alla diretti a 2014/53/UE. Il testo
completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: https://mikrotik.com/products
IS Hér með lýsir Mikrotīkls SIA þ í yfir að RouterBOARD er í samræmi ið grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU.
Fullur texti ESB samræmisyfirlýsingar er að finna á eftirfarandi effangi: https://mikrotik.com/products
LT Aš, Mikrotīkls SIA , pat irtinu, kad radijo įrenginių tipas RouterBOARD atitinka Direkty ą 2014/53/ES. Visas ES atitikties deklaracijos tekstas
prieinamas šiuo interneto adresu: https://mikrotik.com/products
LV Ar šo Mikrotīkls SIA deklarē, ka radioiekārta RouterBOARD atbilst Direktī ai 2014/53/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams
šādā interneta ietnē: https://mikrotik.com/products
MT B'dan, Mikrotīkls SIA , niddikjara li dan it-tip ta' tagħmir tar-radju RouterBOARD huwa konformi mad-Diretti a 2014/53/UE. It-test kollu tad-
dikjarazzjoni ta' konformità tal-UE huwa disponibbli f'dan l-indirizz tal-Internet li ġej: https://mikrotik.com/products
NL Hierbij erklaar ik, Mikrotīkls SIA , dat het type radioapparatuur RouterBOARD conform is met Richtlijn 2014/53/EU. De olledige tekst an
de EU-conformiteits erklaring kan worden geraadpleegd op het olgende internetadres: https://mikrotik.com/products
NO Mikrotīkls SIA erklærer her ed at utstyret RouterBOARD er i sams ar med de grunnleggende kra og ø rige rele ante kra i direkti
2014/53/EU. Den fulle teksten til EU-sams arserklæringen er tilgjengelig på følgende internettadresse: https://mikrotik.com/products
PL Mikrotīkls SIA niniejszym oświadcza, że typ urządzenia radiowego RouterBOARD jest zgodny z dyrektywą 2014/53/UE. Pełny tekst
deklaracji zgodności UE jest dostępny pod następującym adresem internetowym: https://mikrotik.com/products
PT O(a) abaixo assinado(a) Mikrotīkls SIA declara que o presente tipo de equipamento de rádio RouterBOARD está em conformidade com a
Direti a 2014/53/UE. O texto integral da declaração de conformidade está disponí el no seguinte endereço de Internet:
https://mikrotik.com/products
RO Prin prezenta, Mikrotīkls SIA declară că tipul de echipamente radio RouterBOARD este în conformitate cu Directi a 2014/53/UE. Textul
integral al declarației UE de conformitate este disponibil la următoarea adresă internet: https://mikrotik.com/products
SK Mikrotīkls SIA týmto yhlasuje, že rádio é zariadenie typu RouterBOARD je súlade so smernicou 2014/53/EÚ. Úplné EÚ yhlásenie o
zhode je k dispozícii na tejto interneto ej adrese: https://mikrotik.com/products
SL Mikrotīkls SIA potrjuje, da je tip radijske opreme RouterBOARD skladen z Direkti o 2014/53/EU. Celotno besedilo izja e EU o skladnosti je
na oljo na naslednjem spletnem naslo u: https://mikrotik.com/products
SV Härmed försäkrar Mikrotīkls SIA att denna typ a radioutrustning RouterBOARD ö erensstämmer med direkti 2014/53/EU. Den fullständiga
texten till EU-försäkran om ö erensstämmelse finns på följande webbadress: https://mikrotik.com/products
Note. Information contained here is sub ect to change. Please visit the product page on www.mikrotik.com for the most up to date version of this
document.
See mikrotik.com/products for the latest ersion of this document. Page 5, Document #52503 Modified on: 07.OKT.2019

BG. Инструкция: Свържете адаптера на захранване, за да включите устройството. Отворете 192.168.88.1 в уеб браузър, за да
настроите продукта. Повече информация в http://mt.l /help-bg
CS. Návod k použití: Připojte napájecí adaptér k zapnutí přístroje. Ote řete 192.168.88.1 e webo ém prohlížeči pro konfiguraci produktu.
Více informací najdete http://mt.l /help-cs
DA. Instruktionsbog: Tilslut strømadapteren for at tænde for enheden. Åbn 192.168.88.1 i en webbrowser til at konfigurere produktet. Mere
information i http://mt.l /help-da
DE. Bedienungsanleitung: Verbinden Sie das Netzteil, um das Gerät einzuschalten. Öffnen Sie 192.168.88.1 in einem Web-Browser, um das
Produkt zu konfigurieren. Weitere Informationen im http://mt.l /help-de
EL. εγχειρίδιο οδηγιών: Συνδέστε τον προσαρμογέα τροφοδοσίας για να ενεργοποιήσετε τη μονάδα. Ανοίξτε 192.168.88.1 σε ένα πρόγραμμα
περιήγησης στο Web για να διαμορφώσετε το προϊόν. Περισσότερες πληροφορίες στο http://mt.l /help-el
EN. Instruction manual: Connect the power adapter to turn on the de ice. Open 192.168.88.1 in your web browser, to configure it. More
information on http://mt.l /help
ES. Manual de instrucciones: Conecte el adaptador de alimentación para encender la unidad. Abra 192.168.88.1 en un na egador web para
configurar el producto. Más información en http://mt.l /help-es
ET. Kasutusjuhend: Ühendage toiteadapter seadme sisselülitamiseks. A atud 192.168.88.1 in eebilehitseja seadistada toodet. Rohkem
tea et http://mt.l /help-et
FI. Käyttöohje: Kytke irtalähde päälle laitteen. A aa 192.168.88.1 in selaimen määrittää tuotteen. Lisää tietoa http://mt.l /help-fi
FR. Mode d'emploi: Connectez l'adaptateur d'alimentation pour allumer l'appareil. Ou rez 192.168.88.1 dans un na igateur Web pour
configurer le produit. Plus d'informations dans http://mt.l /help-fr
HR. Uputa za uporabu: Priključite napajanje i uključite uređaj. Za konfiguraciju uređaja u pregledniku ot orite 192.168.88.1. Više informacija je
na http://mt.l /help-hr
HU. Használati utasítás: Csatlakoztassa a hálózati adaptert a készülék bekapcsolásához. Megnyitása 192.168.88.1 egy webböngészőben
beállítani a terméket. Több információ http://mt.l /help-hu
IT. Manuale di istruzioni: Collegare l'adattatore di alimentazione per accendere l'unità. Aprire 192.168.88.1 in un browser Web per configurare
il prodotto. Maggiori informazioni in http://mt.l /help-it
IS. Notkunarleiðbeiningar: Tengdu straumbreytinn til að k eikja á tækinu. Opnaðu 192.168.88.1 í afra til að stilla það. Nánari
upplýsingar á http://mt.l /help-is
NO. Instruksjonsmanual: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i nettleseren din for å konfigurere den. Mer
informasjon på http://mt.l /help-no
LT. Naudojimosi instrukcija: Prijunkite maitinimo adapterį įjunkite įrenginį. Į interneto naršyklę 192.168.88.1 Atidarykite galite konfigūruoti
gaminį. Daugiau informacijos rasite http://mt.l /help-lt
LV. Lietošanas instrukcija: Pie ienojiet Strā as adapteri, lai ieslēgtu ierīci. At ērt 192.168.88.1 ar interneta pārlūku, lai konfigurētu produktu.
Plašāka informācija http://mt.l /help-l
MT. Manwal tal-istruzzjoni: Qabbad l-adapter tal-qawwa biex iddawwar it-tagħmir. Iftaħ 192.168.88.1 fil-web browser tiegħek, biex jiġi
kkonfigurat. Aktar informazzjoni fuq http://mt.l /help-mt
NL. Handleiding: Sluit oedingsadapter aan op het apparaat in te schakelen. Open 192.168.88.1 in een webbrowser om het product te
configureren. Meer informatie in http://mt.l /help-nl
PL. Instrukcja obsługi: Podłącz adapter zasilania, aby włączyć urządzenie. Otwórz 192.168.88.1 w przeglądarce internetowej, aby
skonfigurować urządzenie. Więcej informacji w http://mt.l /help-pl
PT. Manual de instruções: Conecte o adaptador de alimentação para ligar o aparelho. Abra 192.168.88.1 em um na egador da web para
configurar o produto. Mais informações em http://mt.l /help-pt
RO. Instrucțiuni de utilizare: Conectați adaptorul de alimentare pentru a porni aparatul. Deschide 192.168.88.1 într-un browser web pentru a
configura produsul. Mai multe informații în http://mt.l /help-ro
SK. Navodila: Priključite napajalnik za klop napra e. Odprite 192.168.88.1 spletnem brskalniku nasta iti izdelek. Več informacij
http://mt.l /help-sk
SL. Návod na použitie: Pripojte napájací adaptér k zapnutiu prístroja. Ot orte 192.168.88.1 o webo om prehliadači pre konfiguráciu produktu.
Viac informácií nájdete http://mt.l /help-sl
SV. Instruktionsmanual: Anslut nätadaptern för att slå på enheten. Öppna 192.168.88.1 i en webbläsare för att konfigurera produkten. Mer
information på http://mt.l /help-s
NO. Bruksanvisningen: Koble strømadapteren for å slå på enheten. Åpne 192.168.88.1 i en nettleser for å konfigurere produktet. Mer
informasjon på http://mt.l /help-no
RU. Руководство по эксплуатации: подключите адаптер питания чтобы включить устройство. Откройте 192.168.88.1 в своем веб-
браузере для конфигурации. Дополнительная информация http://mt.l /help-ru
CN. 说明书。 连接电源适配器以打开设备。 在Web 浏览器中打开192.168.88.1 进行配置。 有关http://mt.l /help-zh 的更多信息
See mikrotik.com/products for the latest ersion of this document. Page 6, Document #52503 Modified on: 07.OKT.2019