Milagrow RoboPhelps 40 User manual

RoboPhelps 40
User Manual
RoboPhelps 40 Commercial Robotic Pool Cleaner
www.milagrowhumantech.com

RoboPhelps 40 Commercial Robotic Pool Cleaner
Troubleshooting and Warning lights
Safety Checklist
Safety Warnings

RoboPhelps 40 Commercial Robotic Pool Cleaner
Please read this manual carefully before using the RoboPhelps 40
Before performing maintenance or service on the RoboPhelps 40 please
esure the power is disconnected to avoid personal injury or property loss.
The RoboPhelps 40 is designed for use in swimming pools only. Any other
use is prohibited and will void manufacturer’s warranty.
Do not allow the Power Box to come in contact with water, and it is
recommended to be placed in a shady, dry and ventilated area.
Do not swim in the pool whilst the RoboPhelps 40 is in use in order to
avoid personal injury.
When in use, the Power Supply and Caddy Cart must remain 3 meters
away from the edge of the pool.
Do not use the RoboPhelps 40 if there is a chance of thunder storm to
avoid personal injury.
Users are only permitted to perform maintenance described in this manual.
Any tampering with the Motor Box or Power Supply will void the warranty.
Ensure the RoboPhelps 40 is fully submerged before turning the power
box on.
If the RoboPhelps 40 is not going be used for a long time, make sure to
disconnect the power. keep it clean and put it in a safe, dry and
well - ventilated area.
If the RoboPhelps 40 stops working, please refer to section 6
“Troubleshooting”. If you cannot find the root cause, please contact
your company engineer.
0
The optimum working temperature for the RoboPhelps 40 is between 10 C
0
and 32 C, avoid direct sunlight when not in use.
The RoboPhelps 40 is suitable for the swimming pools no deeper than 3
meters.
Lift the RoboPhelps 40 out of the water using the robot handles, do not lift
the RoboPhelps 40 using the floating cable. Lifting via the cable voids
warranty.

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
Automatic cleaning: The default mode is automatic, however, this can be overridden using the
remote Control. When the Remote Control is not being used, the RoboPhelps 40 will return
to automatic mode.
Overall cleaning: The RoboPhelps 40 not only cleans the floor of your pool, it also cleans the
wall, at the same time, RoboPhelps 40 will filter water, and the dirt will be collected into
Filter Bag.
Timer cleaning: You can select one of three cleaning time with Remote Control (4h,6h or 8h)
The RoboPhelps 40 will shut down automatically when the selected cycle time is over.
the power box must be turned of manually.
Manual cleaning: The Remote Control can be used to clean specific areas immediately.
Self protection (Out of water): Impeller decelerates to a stop in twenty five second if the
RoboPhelps 40 senses it is no longer in water, to prevent personal injury and to protect the
water pump.
Stop protection: The RoboPhelps 40 will stop if foreign matter retards the impeller.
4Hrs/6Hrs/8Hrs
70μm

RoboPhelps 40 Commercial Robotic Pool Cleaner

RoboPhelps 40 Commercial Robotic Pool Cleaner

RoboPhelps 40 Commercial Robotic Pool Cleaner

RoboPhelps 40 Commercial Robotic Pool Cleaner
Warning
kept

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
This way it will
pool.

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40
To clean RoboPhelps 40 invert it
RoboPhelps 40 after
RoboPhelps 40
RoboPhelps 40
Power Box
latch
. Clean . Once clean.

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40 RoboPhelps 40
RoboPhelps 40. Then
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
, reel
for details please refer

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
out or damaged.

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40
out or broken.

RoboPhelps 40 Commercial Robotic Pool Cleaner

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40 RoboPhelps 40

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
Wobble RoboPhelps 40 and
make sure air is released
RoboPhelps 40
RoboPhelps 40
Clean the Impeller
Replace the Drive Belt
Replace Axis Sleeves
Axis sleeves are
worn out
You
Sponge wheel are
worn out
Axis sleeves are
worn out
The sponge wheels
don’t soak enough .
Normal time is
about 5-15 minutes
engineer

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40 has
stopped due to
lack of water
RoboPhelps 40
RoboPhelps 40.
Contact the engineer for support
Blue and Green

RoboPhelps 40 Commercial Robotic Pool Cleaner
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
RoboPhelps 40
contact [email protected]
engineer