Milesight Agricultural Kit User manual

Milesight IoT
Agricultural Kit
Quick Guide

2
Safety Precautions
Milesight will not shoulder responsibility for any loss or damage resulting from not
following the instructions of this operating guide.
The kit must not be remodeled in any way.
EM300/EM500 are not intended to be used as reference sensors, and Milesight will
not should responsibility for any damage which may result from inaccurate readings.
Do not place the all devices close to objects with naked flames.
Do not place all devices where the temperature is below/above the operating range.
Make sure electronic components do not drop out of the enclosure while opening.
When closing the lid, make sure the lid is fitted the right way, so that the enclosure is
properly sealed.
When installing the battery of sensors, please install it accurately, not reversely or
with wrong model.
Make sure both batteries of EM300 are newest when install, or battery life will be
reduced.
The kit must never be subjected to shocks or impacts.
Declaration of Conformity
Milesight LoRaWAN®agricultural kit is in conformity with the essential requirements and
other relevant provisions of the CE, FCC, and RoHS.
© Xiamen Milesight IoT Co., Ltd.
All rights reserved.
All information in this guide is protected by copyright law. Whereby, no organization or
individual shall copy or reproduce the whole or part of this user guide by any means
without written authorization from Xiamen Milesight IoT Co., Ltd.
For assistance, please contact
Milesight technical support:
Email: [e-mail]
Tel: [phone]
Fax: [phone]
Address: 4/F, No.63-2 Wanghai
Road, 2nd Software Park,
Xiamen, China
Revision History
Date
Doc Version
Description
Jul. 27, 2020
V 1.0
Initial version
Dec. 8, 2020
V 2.0
Replace UC11-T1/UG85 to EM300-TH/UG65

3
Contents
1. Overview.........................................................................................................................................4
2. Preparation....................................................................................................................................4
2.1 Packing List.........................................................................................................................4
2.2 Software Preparation........................................................................................................ 5
3. UG65 Gateway Configuration..................................................................................................... 6
3.1 Fitting Installation.............................................................................................................. 6
3.2 Web GUI Access.................................................................................................................6
3.3 Network Connection.......................................................................................................... 7
3.3.1 Configure the WAN Connection........................................................................... 7
3.3.2 Configure the Cellular Connection.......................................................................8
3.4 LoRaWAN Configuration...................................................................................................9
4. UC1114 Configuration............................................................................................................... 10
5. EM300/EM500 Configuration.................................................................................................. 11
5.1 EM500 Assembly............................................................................................................. 11
5.2 Software Configuration...................................................................................................12
5.2.1 Mobile APP Configuration...................................................................................12
5.2.2 Windows Software Configuration...................................................................... 13
6. Milesight IoT Cloud Configuration...........................................................................................15
7. Hardware Installation................................................................................................................ 16
7.1 UG65 Installation..............................................................................................................16
7.2 UC1114 Installation......................................................................................................... 17
7.3 EM300 Installation...........................................................................................................18
7.4 EM500 Installation...........................................................................................................18
7.4.1 Sensor Installation................................................................................................18
7.4.2 Transceiver Installation....................................................................................... 19
Appendix.......................................................................................................................................... 20
Default Uplink Channels........................................................................................................ 20
Default LoRaWAN Parameters............................................................................................. 21

4
1. Overview
Milesight LoRaWAN®Agricultural Monitoring Node-to-App Starter Kit is designed for
simplifying the process of PoC about LoRaWAN®network establishment and remote
monitoring for the agricultural environment. More information about every product is
available on Milesight IoT website.
2. Preparation
2.1 Packing List
1 × UG65
1 × Ethernet Cable
1 × DC Jack Power
Adapter
1 × Mounting
Bracket
Bracket Mounting
Screws
Wall Mounting Kits
(For UG65)
1 × EM300-TH
Wall Mounting Kits
(For EM300-TH)

5
1 × UC1114
1 × Stubby LoRa
Antenna
1 × 12-Pin Pluggable
Terminal
Wall Mounting
Kits(For UC1114)
1 ×
EM500-SMTC
1 ×
EM500-LGT
Mounting Screws
(For EM500)
Hose Clamps
Note: Please contact your sales representative if the following situations occurs:
Any of above items is missing or damaged;
Other accessories or device models are required for your application.
2.2 Software Preparation
Software
Introduction
Appliance
Download
Milesight
Toolbox
Windows software for
NFC/USB configuration.
UC1114,
EM300/EM500
sensors
https://www.milesigh
t-iot.com/software-do
wnload/
Milesight
Toolbox
(APP ver.)
Mobile APP for NFC
configuration.
EM300/EM500
sensors
Apple Store or Google
Play
Milesight IoT
Cloud
(APP ver.)
Add and manage the
LoRaWAN®nodes on the
Milesight IoT Cloud.
Milesight IoT
Cloud
Apple Store or Google
Play