Milestone pro MPTP-TUH-100KVM User manual

MPTP-TUH-100KVM
4K HDBaseT 2.0 KVM Extender Set
All Rights Reserved
Version: MPTP-TUH-100KVM_2020V1.4
User Manual

4K HDBaseT 2.0 KVM Extender Set
Preface
Read this user manual carefully before using the product. Pictures are shown in this
manual for reference only. Different models and specifications are subject to real
product.
This manual is only for operation instruction, please contact the local distributor for
maintenance assistance. The functions described in this version were updated till April,
2020. In the constant effort to improve the product, we reserve the right to make
functions or parameters changes without notice or obligation. Please refer to the dealers
for the latest details.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

4K HDBaseT 2.0 KVM Extender Set
SAFETY PRECAUTIONS
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Unpack the equipment carefully and save the original box and packing material for
possible future shipment.
⚫Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
⚫Do not dismantle the housing or modify the module. It may result in electrical shock
or burn.
⚫Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
⚫Refer all servicing to qualified service personnel.
⚫To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this
product near water.
⚫Do not put any heavy items on the extension cable in case of extrusion.
⚫Do not remove the housing of the device as opening or removing housing may
expose you to dangerous voltage or other hazards.
⚫Install the device in a place with fine ventilation to avoid damage caused by
overheat.
⚫Keep the module away from liquids.
⚫Spillage into the housing may result in fire, electrical shock, or equipment damage. If
an object or liquid falls or spills on to the housing, unplug the module immediately.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
⚫Unplug the power cord when left unused for a long period of time.
⚫Information on disposal for scrapped devices: do not burn or mix with general
household waste, please treat them as normal electrical wastes.

4K HDBaseT 2.0 KVM Extender Set
Table of Contents
1. Product Introduction....................................................................................................1
1.1 Features ............................................................................................................1
1.2 Packing List.......................................................................................................1
2. Panel Description........................................................................................................2
2.1 Transmitter.........................................................................................................2
2.2 Receiver ............................................................................................................3
3. System Connection.....................................................................................................4
3.1 Usage Precautions............................................................................................4
3.2 System Diagram................................................................................................4
3.3 Connection Procedure.......................................................................................5
4. Specification ...............................................................................................................6
5. Troubleshooting & Maintenance .................................................................................7
6. Customer Service .......................................................................................................8

4K HDBaseT 2.0 KVM Extender Set
1
1. Product Introduction
Compliant with HDMI 1.4 & HDCP 2.2, The HDBaseT 2.0 KVM Extender Set is a 4K
HDMI Extender set developed with the latest HDBaseT™ 2.0 technology to extend
uncompressed HDMI video, audio, USB 2.0, control signals and PoC over a single
CAT5e/6 cable. The unidirectional PoC compliant extender comes with only one power
supply, which means that the Receiver can be powered via Transmitter to save installers
time and added cost to installing a power outlet. Ideally designed for smart displays and
KVM solutions fitting digital signage markets.
1.1 Features
⚫Compatible with HDMI 1.4 and is backwards compatible with all previous HDMI
standards (e.g. HDMI 1.4), delivers high-resolution AV signal (1080p 3D, 4K@60Hz)
⚫Support HDBT 2.0, transmit 1080p/4K signal up to 100m over single CAT6 cable
⚫EDID Pass-Thru
⚫HDCP 2.2 compliant
⚫Front panel status LEDs for power, HDBT link & HDCP
⚫USB & RS232 control
⚫Unidirectional PoC
1.2 Packing List
⚫1x Transmitter
⚫1x Receiver
⚫2x Transmitter Mounting Ears with 2 Screws
⚫2x Receiver Mounting Ears with 2 Screws
⚫4x Transmitter Plastic Cushions
⚫4x Receiver Plastic Cushions
⚫2x RS232 cables (3-pin to DB9)
⚫1x Power Adapter (DC 12V 2A)
⚫1x User manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.

4K HDBaseT 2.0 KVM Extender Set
2
2. Panel Description
2.1 Transmitter
No.
Name
Description
①
Indicators
Power:
⚫OFF: No power.
⚫RED: DC power present.
ON: Working status indicator.
⚫OFF: Not operational.
⚫Blinking GREEN: Normal operation.
LINK: HDBT link status indicator.
⚫OFF: No Link.
⚫GREEN: Link successful.
⚫Blinking GREEN: Link problem.
HDCP: HDCP compliant indicator
⚫OFF: No HDMI traffic (no picture).
⚫GREEN: HDMI signal with HDCP.
⚫Blinking GREEN: HDMI signal without HDCP.
②
FW
Micro USB port for firmware upgrade.
Firmware updated need auxiliary equipment, please contact with
our after-sales department for more details.
③
HDMI IN
Connects to HDMI source.
④
HDBT OUT
Connects to the HDBT IN port on rear panel of the Receiver via
CAT5e/CAT6a cable, compliant with HDBT 2.0 and support
unidirectional PoC to power the Receiver.
⑤
USB OUT
Type-B USB port, connects to PC to receive remote USB control
⑥
RS232
Serial port, connects to control device or device to be controlled,
supports bi-directional RS232 control.
⑦
DC 12V
Connects to a DC 12V 2A power adapter.
FW
ON LINK HDCP DC 12V
Tx Rx
RS232HDBT OUTHDMI IN USB OUT
1234567

4K HDBaseT 2.0 KVM Extender Set
3
2.2 Receiver
No.
Name
Description
①
Indicators
Power:
⚫OFF: No power.
⚫RED: DC power present.
ON: Working status indicator.
⚫OFF: Not operational.
⚫Blinking GREEN: Normal operation.
LINK: HDBT link status indicator.
⚫OFF: No Link.
⚫GREEN: Link successful.
⚫Blinking GREEN: Link problem.
HDCP: HDCP compliant indicator.
⚫OFF: No HDMI traffic (no picture).
⚫GREEN: HDMI signal with HDCP.
⚫Blinking GREEN: HDMI signal without HDCP.
②
FW
Micro USB port, used for firmware update.
Firmware updated need auxiliary equipment, please contact with
our after-sales department for more details.
③
HDMI OUT
Connects to HDMI display.
④
HDBT IN
Connects to the HDBT OUT port on the Transmitter via CAT5e/
CAT6a cable, compliant with HDBT 2.0.
⑤
USB IN
Type-A USB ports, connects to mouse/ keyboard/ U-disk for
remote USB access.
⑥
RS232
Serial port, connects to control device or device to be controlled,
supports bi-directional RS232 control.
USB IN
Tx Rx
HDBT IN
HDMI OUT RS232
FW
ON LINK HDCP
123456

4K HDBaseT 2.0 KVM Extender Set
4
3. System Connection
3.1 Usage Precautions
⚫Make sure all components and accessories included before installation.
⚫System should be installed in a clean environment with proper temperature and
humidity.
⚫All of the power switches, plugs, sockets, and power cords should be insulated and
safe.
⚫All devices should be connected before power on.
3.2 System Diagram
HDB T IN
HDM I OUT RS232
Tx Rx
USB I N
3rd PartyMouseKeyboardProjector
HDB T OUT
HDM I IN DC 12 VRS2 32
Tx Rx
USB O UT
PC Room 1
Transmitter
Room 2
Receiver
4K 100m HDMI:
USB:
RS232:
HDBT:

4K HDBaseT 2.0 KVM Extender Set
5
3.3 Connection Procedure
Step1.Connect HDMI source (such as PC) to HDMI IN port of the Transmitter with an
HDMI cable.
Step2.Connect HDBT OUT port of the Transmitter to HDBT IN port of the Receiver
through a straight-thru CAT5e/CAT6 cable.
Step3.Connect a HDMI display to HDMI OUT port of the Receiver with HDMI cable;
Step4.When using the USB control, do the following:
1) Connect PC to the USB OUT port of Transmitter.
2) Connect Mouse/ Keyboard/U-disk to the USB IN port(s) of Receiver.
Step5.When using the bi-directional RS232 control, do the following:
1) Connect PC to the RS232 port at either the Transmitter or the Receiver.
2) Connect a third-party device (such as projector) need to be controlled to the
RS232 port at the other end.
3) Send RS232 commands to control the third-party device. For more details
about RS232 commands, please refer to the user manual for the third-party
device.
Step6.Connect with DC12V power adaptor to the power port of Transmitter, the
Receiver will be powered synchronously via PoC.
Note:
⚫System Diagram shown in this manual is for reference only, more specific schemes
depend on real-time applications.
⚫Connect HDBT ports via straight-thru CAT5e/6 cable with TIA/EIAT568B standard
terminations at both ends.
⚫RS232 communication protocol: Baud Rate: 9600; data bit: 8; stop bit: 1; parity:
none. HDBT Transceiver receives RS232 control from devices with various baud
rate (2400, 4800, 9600, 19200, 38400, 57600, 115200).
⚫HDBT ports can work with our company’s HDBT products that has same power
supply solution.

4K HDBaseT 2.0 KVM Extender Set
6
4. Specification
Transmitter
Input
(1) HDMI
Input Connector
(1) 19 pin type-A male HDMI
Output
(1) HDBT, (1) USB OUT
Output Connector
(1) RJ45, (1) Type-B USB
Control
(1) RS232
Control Connector
(1) 3-pin pluggable terminal block
Receiver
Input
(1) HDBT, (1) USB IN
Input Connector
(1) RJ45, (1) Type-A USB
Output
(1) HDMI
Output Connector
(1) 19 pin Type-A male HDMI
Control
(1) RS232
Control Connector
(1) 3-pin pluggable terminal block
General
HDMI Audio Format
Supports PCM, Dolby Digital, DTS, DTS-HD
HDMI Standard
1.4
HDCP
2.2
Transmission Distance
1080p/4K@60Hz≤100m (Cat6)
Video Resolution
Up to 4K@60Hz 4:2:0
Bandwidth
10.2Gbps
EDID Management
EDID Pass-Thru
Operation Temperature
-5 ~ +55℃
Storage Temperature
-25 ~ +70℃
Relative Humidity
10% ~ 90%
External Power Supply
Input:100V~240V AC; Output: DC 12V 2A
Power Consumption
18W(max)
Dimension (W*H*D)
4.5”x 0.86” x 3.74”/116 x 22 x 95 mm
Net weight
TX:197g; RX:198g
Note: All nominal levels are at ±10%.

4K HDBaseT 2.0 KVM Extender Set
7
5. Troubleshooting & Maintenance
Problems
Potential Causes
Solutions
No reaction to any
operation, power indicator
is off
Haven’t been powered on
Insert power adapter to
Transmitter
Abnormal indication of the
status LEDs
Wrong specification of the
power adapter
Change for DC 12V 2A
power adapter.
Color lose or poor picture
quality
Signal loss caused by long
transmission distance
beyond effective value
Make sure the connecting
cable is within 100m and of
good quality.
Bad quality of the HDMI
cable
Ensure the HDMI cables
used at source,
Transmitter, Receiver and
display are properly
connected and are of good
quality
Cannot use the device
the device is broken
Send it to authorized
dealer for repairing.
Note: If your problem persists after following the above troubleshooting steps, seek
further help from authorized dealer or our technical support.

4K HDBaseT 2.0 KVM Extender Set
8
6. Customer Service
The return of a product to our Customer Service implies the full agreement of the
terms and conditions hereinafter. There terms and conditions may be changed without
prior notice.
1) Warranty
The limited warranty period of the product is fixed three years.
2) Scope
These terms and conditions of Customer Service apply to the customer service
provided for the products or any other items sold by authorized distributor only.
3) Warranty Exclusions:
⚫Warranty expiration.
⚫Factory applied serial number has been altered or removed from the product.
⚫Damage, deterioration or malfunction caused by:
✓Normal wear and tear.
✓Use of supplies or parts not meeting our specifications.
✓No certificate or invoice as the proof of warranty.
✓The product model showed on the warranty card does not match with the
model of the product for repairing or had been altered.
✓Damage caused by force majeure.
✓Servicing not authorized by distributor.
✓Any other causes which does not relate to a product defect.
⚫Shipping fees, installation or labor charges for installation or setup of the product.
4) Documentation:
Customer Service will accept defective product(s) in the scope of warranty
coverage at the sole condition that the defeat has been clearly defined, and upon
reception of the documents or copy of invoice, indicating the date of purchase, the
type of product, the serial number, and the name of distributor.
Remarks: For further assistance or solutions, please contact your local distributor.
Table of contents
Other Milestone pro Cables And Connectors manuals
Popular Cables And Connectors manuals by other brands

Lightmaxx
Lightmaxx Platinum Series user manual

HRS
HRS DF57 Series manual

Festo
Festo NEBC-D12G4-E -R3G4-ET Series Assembly instructions

Hubbell
Hubbell 50 AMP TWIST-LOCK installation instructions

PCB Piezotronics
PCB Piezotronics 010T30 Installation and operating manual

MacArtney
MacArtney OptoLink instructions