Rean RCAC3M-X-000 User manual

|
R
B
D
A
R
Page 1
A
.
Insert cable into the bushing and housing.
Note:“Apply cable pulling
lubricant to cable jacket.”
BSeperate the housing from the bushing
(cable remain in bushing)
CPlace chuck over the cable.
C
DPrepare cable as shown.
VDE (EN 60320-1/EN60320-2-2) UL (UL 60320-1/CSA C22.2 NO.60320-1)
20mm [0.787"]
P 23 mmE [0.9"]
8 mm
[0.32"]
20mm [0.787"]
P 23 mmE [0.9"]
8 mm
[0.32"]
RCAC3M-X-000
ASSEMBLY INSTRUCTION
40-50 mm
A.
Power Cable Connector
ASSEMBLY INSTRUCTION

G
VDE ULWiring
blackL brown
whiteN blue
green/yellow green
E
F
Draft. Nr.: NCN 026 Update: 2022-04-26
I
www.rean-connectors.com
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
Data subject to change without prior notice. 2021 REAN . is registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
® ®
© REAN
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
Page 2
R
R
ASSEMBLY INSTRUCTION
|
Torque Value 0.7 Nm
Slide the cable into the contacts and clamp
with the screw with Torx size T8.
Torx size T8
E
3.
1.
2.
Important
Push and turn simultaneously.
Important:Align the chuck by positioning the nose
into keyway.
Slide chuck onto insert (1) and then both into
housing (2).
F
4.
Torque Value 2.0NM
5.
Slide the cable clamp (3) bushing up the cable and
tighten it.
Important: Black O-ring to hide to achieve IP
protection (6)
G
Turn bushing 360
Press with screw driver to unlock
Repat step + until bushing is unscrewed.
FOR DISASSEMBLY - OPEN TWIST LOCK!
1.
2.
3. 1. 2.
1.
2.
category,do not expose the
connection to bending forces
(e.g. do not attach loads to
the cable,no free-dangling
cable windings etc.).
CAUTION
To ensure protection
XLR Cable Connectors:
Find more details on
www.rean-connectors.com
FORCE
Power Cable Connector

Draft. Nr.: NCN 026 Update: 2022-04-26
I
www.rean-connectors.com
Neutrik USA Inc. USA T: +1 704 / 972 3050 F: +1 704 / 438 9202
( )
Neutrik UK Ltd. UK T: +44 1983 / 811 441 F: +44 1983 / 811 439
Neutrik Vertriebs GmbH DE / NL / AT/DK T: +49 8131 / 280 890 F: +49 8131 / 280 830
Neutrik AG LI T: +423 / 237 24 24 F: +423 / 232 53 93
Data subject to change without prior notice. 2021 REAN . is registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
® ®
© REAN
Neutrik Hong Kong Ltd. HK T: +852 / 2687 6055 F: +852 / 2687 6052
Neutrik Tokyo Ltd. JP T: +81 3 / 3663 4733 F: +81 3 / 3663 4796
Neutrik France FR T: +33 1 / 4131 6750 F: +33 1 / 4131 0511
Page 3
R
R
ASSEMBLY INSTRUCTION
|
RRAC3M-X-000 RRAC3F-X-000
RCAC3M-X-000
(Plug connector)
B.
2
RCAC3F-X-000
It serves to supply power to an appliance and from an appliance to other equipment.
The power con system is certified as a connector with breaking capacity according to IEC60320,VDE
0625.It is intended for use as an appliance coupler and interconnect coupler.
Application:
To be installed by qualified person only.
CONNECTOR ASSIGNMENT
Power IN
(Connector)
APPLIANCE INLET APPLIANCE OUTLET
Power OUT
Approval based:
Rating:
Cable Type:
VDE
IEC 60320-1/EN 60320-1
250V ac/16A
HV05V-F3G 1.0mm ,Length max. 2m
HV05V-F3G 1.5mm-2.5mm
2
Strain Relief:
Cable O.D.:
White chuck
6.0 - 12.0 mm
UL
UL 60320-1/CSA C22.2 NO.60320-1
250V ac/20A
SJTOW,SJOOW 3X12 AWG
6.0 - 12.0 mm
White chuck
UL50E environmental rating
Enclosure Type when mated with attachment plug RRAC3M-X-000 with Sealing Cover RA-X-001 and
RRAC3F-X-000 with sealing cover RA-X-003.
H07RN-F3G 1.5mm2
Power Cable Connector
ASSEMBLY INSTRUCTION