Milestone pro MPTP-T100SS-H2 User manual

MPTP-T100SS-H2
HDBaseT Extender Set
230ft/70m 4K UHD HDMI 2.0
ss
All Rights Reserved
Version: MPTP-T100SS-H2_2020V1.0
User Manual

HDBaseT Extender Set
1
Statement
Read this user manual carefully before using the product. Pictures shown in this manual is for reference
only, different model and specifications are subject to real product. This manual is only for operation
instruction only, not for any maintenance usage. The functions described in this version are updated till
March, 2020. In the constant effort to improve our product, we reserve the right to make functions or
parameters changes without notice or obligation. Please refer to the dealers for the latest details.
Safety Precaution
To ensure the best from the product, please read all instructions carefully before using the device. Save
this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Unplug the power cord when left unused for a long period of time.
Refer all servicing to qualified service personnel.
After-Sales Service
We provide limited warranty for the product within three years counting from the first day you buy this
product (The purchase invoice shall prevail).
Introduction
The product is an HDMI 2.0 HDBaseT Extender set consist of transmitter and receiver. It extends 1080p
HDMI signal via CAT5e/6a cable at 100m/PoC, and enables IR and RS232 pass-through to control local
source device from remote or far-end display. It also features 4 Ethernet ports for network extension.
Features
Supports HDMI 2.0 and HDCP 2.2, and is backward compatible to the previous version.
Maximum transmission distance is up to 70m for 4Kx2K, and 100m for 1080p.
Supports bi-directional IR and RS232 pass-through for long-distance control.
Supports bi-directional PoC for simplified wiring.
Supports HDR.
Features DIP switcher for choosing RS232 mode: Control or Update.

HDBaseT Extender Set
2
Package List
1x Transmitter
1x Receiver
4x Mounting Ears with 4 x Screws
8x Plastic Cushions
2x 3-pin Phoenix Connector
1x Power Adaptor (24VDC,1.25A)
1x User Manual
Panel Description
Transmitter
Receiver
No.
Name
Description
①
RS232 MODE switcher
CTRL: RS232 pass-through control mode;
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Link status LED
OFF: No Link; GREEN:Link successful.
③
HDCP compliant LED
OFF: No HDMI traffic (no picture); GREEN: Traffic with HDCP;
Blinking: Traffic without HDCP.
④
Power LED
OFF: No power; RED: DC power present.
⑤
RS232 connectors
If one is connected with control device (e.g. PC), and the other
should be connected with the third-party that need to be
controlled.
⑥
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
local.
⑦
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device from remote.
⑧
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT (Receiver)
Connect with HDMI display.
⑨
HDBT OUT (Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a/7
cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a/7
cable.
RS23 2 IR IN IR OUT HDMI I N HDBT OUT ETHERN ET ETHE RNE T DC 24V
RXTX
HDCPLINK
TX
UPDATE B
UPDATE A
CTRL
12345678910 11
RX
TX
HDCPLINK
RX
UPDATE B
UPDATE A
CTRL
12345678910 11
RS232 IR IN IR OUT HDMI OUT H DBT IN ETHERN ET ETHERNET DC 24V

HDBaseT Extender Set
3
⑩
ETHERNET
Total 4 100M Ethernet ports, one of these ports should be used
for internet access, and the others can be connected with
computers. If connect successfully and work normally, the yellow
LED will keep blink and the green one will keep on.
⑪
DC 24V power ports
Support bi-directional PoC, one of ports should be connected
with DC24V 1.25A power adaptor.
Specification
Model
Spec
Transmitter
Receiver
Input
HDMI IN
HDBT IN
Output
HDBT OUT
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
IR IN, IR OUT, RS232
Ethernet Ports
2 RJ45 connectors
2 RJ45 connectors
General
Transmission Mode & Distance
HDBaseT, 1080p ≤ 100m; 4K×2K ≤ 70m
Ethernet Transmission Speed
Adaptive 10M/100M (max), full duplex or half duplex
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard
HDMI 2.0 and HDCP 2.2
Power Consumption
17W (max)
Temperature
-10 ℃~ 50℃
Humidity
0% ~ 90%
Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output: 24VDC 1.25A
Dimension (W*H*D)
152mmx16.2mmx104mm
152mmx16.2mmx104mm
Net Weight (g)
240g
240g
System Diagram
Note: This picture is for reference only, the specific scheme is subject to real devices.
RXTX
RXTX
HDMI :
RS23 2:
IR:
HDBa seT:
Ethe rnet:
IR
Emit ter
DVD La ptop
HDTV
IR Rec eiv er
TV Rem ote
IR
Emit ter
IR Rec eiv er
DVD Re mote
Rout er
Transmitter Receiver
Lapt op
Lapt op