Milly and Coup Milo2 User manual

Second Rule of Parent Club: always read your
Milo2
IMPORTANT! READ CAREFULLY
AND KEEP FOR FUTURE REFERENCE

2
Thanks for choosing Milly + Coup.
We bet you can’t wait to meet Milo2,
but before you do, please ensure you
carefully read your manual and all
safety information.
Milo2 complies with both mandatory
and voluntary Australian and New
Zealand Safety Standards, however if
you’re not using it correctly or are not
aware of the safety features, serious
accidents can occur.
Wishing you many fun, happy and safe
adventures out and about with Milo2!
Safety First

3
Contents
4.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
1 7.
18.
20.
22.
24.
25.
25.
Safety warnings
Parts checklist
Setting up your frame
Setting up your seat
Removing your seat
Setting up your canopy
Using the harness
Setting up your bassinet
Attaching and removing
the bassinet
Using your bassinet
Folding the stroller
Using your Milo2
Using Milo2 with a car
capsule
Accessories
Milo2 maintenance
Cleaning instructions
Spare Parts
Warranty

Tips to avoid tears
Safety Warnings
Milo2 is designed and tested to comply with AS 2088:2022,
Consumer Protections Notice No. 8 of 2007 and AS/NZS ISO
8124-3.
4
• FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
• PUT ON ALL THE BRAKES WHENEVER YOU PARK THE STROLLER.
• DO NOT LEAVE CHILDREN UNATTENDED.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU
ADJUST THE STROLLER, OTHERWISE THEY MAY BE INJURED.
• USE THE HARNESS AT ALL TIMES.
• USE THE TETHER STRAP TO STOP THE STROLLER ROLLING AWAY.
• DO NOT USE THIS SEAT WITH ANY OTHER MODELS OF STROLLER.
• DO NOT USE THIS BASSINET ONCE THE CHILD CAN SIT UP UNAIDED
• DO NOT USE FOR UNSUPERVISED SLEEPING

Weight limits
• Maximum weight for a child
in the seat is 22kg.
• Maximum weight for a baby
in the bassinet is 9kg.
• Maximum weight for items
in the basket is 10kg.
• Maximum weight that
can be hung from the
handlebar:
• Seat facing parent: 2kg
• Seat world facing: 4kg
• Maximum weight for
the toddler board (sold
separately) is 20kg
• Maximum weight limited for
the handlebar bag is 2kg.
Baby (0-6 months) specific
• Do not use the bassinet
once the child can sit up
unaided (typically 4-6
months).
• Seat must be reclined to
the flattest position for use
with babies under 6 months
of age until they can sit-up
unaided and support their
head. Without this neck
strength there is a risk their
head could fall forward and
block oxygen flow.
• The harness must be used
at all times when your baby
or child are in the seat.
General Safety
• Never use the stroller in a
manner for which it is not
designed.
• Do not allow your child to
climb, stand on or play with
the stroller.
• Always ensure that the
frame and the seat/
bassinet/car capsule are
correctly engaged before
using the product.
• Do not use parts or
accessories that are not
approved for use with the
Milo2 range. Doing so may
be unsafe and may also
void your warranty.
• Ensure you carefully explain
usage and safety features
to new carers before they
use the pram.
Unsafe Conditions
• Remove your child and
take care when going
up or down stairs or
escalators.
• We recommend you take
your child out of the stroller
when travelling by bus,
tram, or train. Even with
the brake engaged, the
stroller may slide when the
vehicle brakes suddenly or
is travelling on an incline/
decline.
5

• This stroller is designed
for use on flat or gently
sloping surfaces and may
be unstable or even tip
over on higher sloping
and uneven surfaces.
• Do not use or leave the
pram near open fire or
an exposed flame.
• Not suitable for running,
rollerblading or skating.
• Never leave rain covers
or other covers over the
stroller indoors, in a hot
atmosphere or near a
heat source.
Carrying & transporting your
stroller
• Do not lift or carry
the stroller when fully
assembled or when
occupied by your child.
Only lift and carry after
folding.
• Make sure the stroller and
all parts are secured when
being transported in a
vehicle.
• Ensure that the frame lock
is engaged before lifting or
carrying the stroller.
• Always remove the
bassinet or car capsule
and adaptors prior
to folding and carry
separately.
• Take care when folding
and unfolding the stroller
as there is potential for
fingers or other body parts
to be injured.
Accessories
• Milo2 is compatible with
the Milly + Coup Toddler
Board, sold as a separate
accessory. The maximum
weight of a child on the
toddler board is 20kg.
• Milo2 is only compatible
with select car capsule
models using the
compatible capsule
adaptors (both capsule &
adaptors sold separately).
Refer to our website for full
compatibility.
You’re now ready
to set up your Milo2!
6

Canopy
Frame, Basket +
Front Swivel Wheels
UV/Sleep cover
Seat
Belly Bar
1
2
3
4
5
3 x Harness Covers
2 x Rear Wheels
Seat Liner
Infant support set
Handlebar bag
Bassinet set only
Meet Milo2!
Parts Checklist
Please check that you have all of the parts and accessories
that you have ordered.
7
6
7
8
9
10
Bassinet
Bassinet mattress
Bassinet cover
Bassinet adaptors
11
12
13
14
1
2
3
4
5
6
7
8
9
10
11
12 13
14

8
Setting up your frame
Release the black plastic
frame lock on the left of the
frame and lift the handlebar
up until it clicks into place.
Insert the rear wheels into
both ends of the brake axle
until you hear a click.
To adjust the handlebar, unclip
the black plastic locks on each
side and pull or push to the
desired height.
Handy hint: the handlebar
needs to sit within the grooves
on the frame. If the locks won’t
close, give the bar a jiggle to
ensure it’s within a groove.

Setting up your seat
9
The seat can be used in a forward
or parent facing position.
Line up the round seat connectors
on the seat with the frame
connectors and lower the seat
onto the frame. Push the leg-rest
down and seat back backwards
into the normal seated position.
To adjust footrest, simultaneously
press both round buttons on the
sides of the footrest and adjust
down to the desired position. To
raise the footrest, simply lift it up
into position (no need to push the
buttons).
To recline the seat, fully lift the
latch on the back of the seat and
adjust the seat forward or back as
required.
Insert the belly bar into the belly
bar slots on the seat frame.
Note: To remove from one side or
both, press the button on the side
you want to release, and pull the
belly bar out.

10
Removing your seat
Lift the foot rest and seat
base up to meet the seat
back, simultaneously lifting
the seat recline latch and
moving the seat back to the
fully upright position.
Lift the entire seat unit directly
up and out of the frame
connectors.
The strap hanging from your handlebar is a wrist tether
strap. Please ensure you slip your hand through here
whenever you’re using the stroller. It’s designed to prevent
the stroller rolling away and is a requirement of the safety
standards for all prams and strollers.
• The seat must be fully reclined to the flattest position. (An
upright or semi reclined seat can increase the risk of your
child’s head tilting/falling forwards resulting in reduced
airflow which can lead to serious injury or even death)
• Always use the harness with all 5 straps secured.
• The seat can be used with or without the newborn
attachments provided.
Tips to avoid tears
Using Milo2 with a baby under 6 months

11
Setting up your canopy
Ensure the seat is in the parent
facing position to give you
enough room away from the
frame.
(Tip: The canopy connectors are
deliberately tight. The easiest
way to attach the connectors is
to first lay the stroller on its side.)
Attach the canopy connectors
onto the sides of the frame.
(Tip: gently pull both sides out
to widen the connector gap.)
Press the button on the back of
the canopy connectors and slide
the connectors up the frame until
they click into the second position.
To create extra sun and wind
protection for your little one,
simply undo the zip and extend
the canopy.
For additional air flow, simply
open the peek-a-boo flap
on the canopy.
Secure the press studs on the back
of the canopy fabric to the seat.

Using the harness
12
To secure the harness
Insert each of the four harness
prongs into the central buckle.
Adjust the length of each strap to
ensure it fits nice and snug.
To release, press the button in the
middle of the buckle.
To adjust the length of the
shoulder straps
To lengthen or shorten the shoulder
straps, simply pull the adjustor buckle
on the lower half of the shoulder strap,
and adjust to the desired position.
To adjust the height of the
shoulder straps
Slide the buckle that is secured to
the seat back up or down to the
desired position for your child.
To adjust the length of the
waist straps
Simply adjust the adjustor buckle
• Ensure that your child always wears the fitted and
adjusted safety harness with all 5 straps secured.
• Never leave the harness buckled when not fitted to the
child in the stroller. The harness can form loops which
may cause a strangulation hazard.
Tips to avoid tears

13
Setting up your bassinet
(if purchased)
Using the fabric straps,
pull the frame support rods
towards the ends of the
bassinet until they lock under
the 4 plastic clips. Tip: if they
don’t insert easily, simply lift
the clip up to help guide the
rods into place.
Whilst pressing down on the
bassinet body, lift and pull
|the bassinet canopy up until
it clicks into place.
Insert the bassinet mattress.
Tip: many parents like to wrap
their mattress in a muslin cloth
or similar to make cleaning
easier.
Attach the bassinet cover to
the bassinet by zipping it on.

14
Ensure the brake is engaged
and attach the bassinet
adaptors.
Hover the bassinet over the
bassinet adaptors and push
down until you hear a click.
Pull up on the canopy handle
to ensure the bassinet has
securely locked into place.
To remove the bassinet, lift
the release lever at the back
of the canopy all the way up
and use the handle to lift the
bassinet up and o the frame.
To remove the bassinet
adaptors simply press the
buttons in the middle of the
adaptors and lift up.
For safety reasons, we recommend removing your baby prior
to attaching or removing your bassinet.
Attaching and removing
the bassinet

15
To adjust the canopy, press
the two buttons on the inside
sides and lower the canopy
to the desired position
(Note: there are 2 canopy
positions).
To raise the canopy simply
lift it back up; no need to
push the buttons.
Using your bassinet

16
Folding the stroller
Note: The stroller can be folded with the seat on and facing in either
direction. Always take care of fingers and body parts around moving
parts to avoid injury.
Before folding, ensure that the front
wheels are unlocked.
Adjust the handlebar to the lowest
position and ensure that the locks
are securely closed.
Lift the primary lock up with your
forefinger (located on the right frame
release lever) before simultaneously
pulling both frame release levers up
towards you as far as they go.
Push downwards on the handlebar
and the frame will collapse onto the
floor.
Seat forward facing: Pull the foot rest
section to sit flat against the seat.
Ensure the frame lock has engaged
before lifting and carrying by the
handlebar. Always bend from your
knees when lifting.
Seat parent facing: Lift the seat
recline latch up before pulling the
seat back to meet the footrest
section.
primary lock
frame
release lever

17
Using your Milo2
When stopped, always use the brake
by pressing down on the bottom of
the red brake paddle with your foot
until you feel it click into place.
When travelling fast along straight
surfaces or across uneven terrain, the
front wheels may spin or cause what’s
known as “wheel shudder”.
The Milo basket has been tested to hold 10kg. Overloading
the basket with more weight may cause the basket to
break.
To lock the front wheels into place, slide to
engage the wheel lock buttons (located
on the back of the front wheel sockets).
To start travelling again press down
on the top of the red paddle with
your foot to disengage the brake
and o you go!
OFF
ON
Rear brake
Front wheel locks
Basket

To attach your capsule
Using Milo2 with a car capsule
Connect a compatible car capsule to your Milo2 Stroller using
our Milo2 Capsule Adaptors.
NOTE: Milo2 Capsule Adaptors are sold separately to your Milo2
stroller.
The following car capsules are compatible with the Milo2
Capsule Adaptors. Please refer to our website for the most
current compatibility list.
• Maxi-Cosi Mico AP
(manufactured from 2013
onwards)
• Maxi-Cosi Mico Plus
• Maxi Cosi Mico 6
• Maxi-Cosi Mico AP limited
edition
• Maxi-Cosi Citi (adaptors
purchased after 01/14/2022
only)
• Cybex Cloud Q
• Nuna KLIK Plus
• Nuna Pipa KLIK
• Bugaboo Turtle by Nuna
• Joie i-Gemm
1. Apply the brake and remove the
seat/bassinet from your stroller.
2. Attach the two capsule adaptors to
the corresponding connector points
on the stroller frame where you would
normally attach the seat.
Note: when standing behind the
handlebar (as if you were pushing
the stroller), the “L” labelled adaptor
goes on your left.
3. Attach the car capsule onto the
adaptors with the capsule facing
the stroller handlebar ensuring it
clicks in securely.
18

To remove your capsule
• FOLLOW THE CAR CAPSULE MANUFACTURER’S INSTRUCTIONS
CAREFULLY TO PREVENT INJURY OR EVEN DEATH.
• READ MANUFACTURER’S MAXIMUM USAGE TIME THAT BABIES
CAN REMAIN IN YOUR SPECIFIC CAPSULE FOR. THIS IS GENERALLY
BETWEEN 90-120 MINUTES.
• DO NOT USE Milo2 CAPSULE ADAPTORS WITH ANY CAPSULE NOT
AUTHORISED BY MILLY + COUP.
• NEVER LIFT THE STROLLER OR CAPSULE WHILE THE TWO ARE
ATTACHED.
• NEVER PLACE THE CAR CAPSULE IN THE CAR WHILE ADAPTORS ARE
ATTACHED.
• DO NOT PLACE OR HANG ANY ACCESSORIES ON THE CAPSULE
WHILE ON THE STROLLER. THIS MAY CAUSE YOUR STROLLER TO TIP.
Using Milo2 with a car capsule
1. Press the release buttons on the
capsule.
2. While pushing the buttons, lift the
capsule o the adaptors.
3. Push the release buttons on the
adaptors to remove them from the
frame.
Tip: Because the capsule adaptors
are designed to fit a range of
capsules, they may feel tighter or
looser with dierent models. Rest
assured they have been rigorously
tested and this is normal.
19

Use Milo2 your way with our compatible accessories that make travels
on-the-go with baby easy. From extra SPF protection to keeping your
newborn cosy, our accessories have you covered.
20
• Never leave the stroller covered indoors, in very hot
weather or near a heat source.
• Always supervise and monitor your child regularly while
the stroller is covered.
Tips to avoid tears
Pull the rain cover over the top
of the canopy and then over the
footrest as shown.
Rain cover - seat
Pull the rain cover over the
canopy of the bassinet, securing
it underneath the release latch.
Pull the opposite end over the
foot end of the bassinet to secure
in place.
Rain cover - bassinet
Milo2 Accessories