mompush T629 User manual
WARNING: CHECK THAT THE PRAM BODY OR SEAT
UNIT ATTACHMENT DEVICES ARE CORRECTLY ENGAGED
BEFORE USE.
WARNING: THE PRODUCT IS NOT SUITABLE FOR
RUNNING OR SKATING.
3
WARNING:
Remember, your child safety is your responsibility:
• When using the stroller, always ensure your hand is positioned in and around
• the tether strap. The strap is a compulsory safety feature which must be used
• at all times. It is for the safety and benefit of your child.
• This product is suitable for one child in an upright or reclined position from
• birth and up to 15kg.
• In bassinet mode this product is suitable for one child from birth who cannot
• sit up unaided, roll over and cannot push itself up on their hands and knees.
• Maximum weight of baby 9kg.
• The stroller will become unstable if the manufacturer’s recommended load
• is exceeded.
• The correct use and maintenance of this stroller are essential.
• Be sure that all clamps and buckles are securely fixed and in place before
• use.
• When in the stroller, your child must always wear the safety harness,
• correctly fitted and adjusted, at all times.
• Always use the harness correctly fitted and adjusted, with your child in the
• seat.
• Never leave the harness buckles when not fitted to a child in the stroller
• because the harness can form loops which may pose a strangulation hazard.
• When in use, the head of the child in the product should never be lower
• than the body of the child.
• Avoid serious injury from falling or sliding out. Always use seat belt.
• Excessive weight may cause a hazardous unstable condition to exist.
• Unstable hazardous conditions may exist if package carrying
accessories are added onto the product.
• Parcel or accessory items，Or when the two are placed in the car, it may
cause instability of the cart.
2
WARNING:
WARNING: TO AVOID INJURY OR DEATH READ
THESE INSTRUCTIONS CAREFULLY BEFORE USE AND
KEEP FOR FUTURE REFERENCE. THE CHILD MAY BE
HURT IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
WARNING: FOLLOW THE MANUFACTURERS
INSTRUCTIONS.
WARNING: ALWAYS APPLY THE BRAKES WHENEVER
THE STROLLER IS STATIONARY.
WARNING: DO NOT LEAVE THE CHILD UNATTENDED.
WARNING: SECURE THE CHILD IN THE HARNESS
AT ALL TIMES.
WARNING: DO NOT CARRY EXTRA CHILDREN OR
BAGS ON THIS STROLLER.
WARNING: MAKE SURE CHILDREN ARE CLEAR OF
ANY MOVING PARTS IF YOU ADJUST THE STROLLER
OTHERWISE THEY MAY BE INJURED.
WARNING: USE THE HARNESS AT ALL TIMES.
chassis
x1
A
Parts List
5
front wheels
x2
B
rear wheels
x2
C
canopy
x1
F
seat unit
x1
E
bumper bar
x1
D
apron
x1
G
raincover
x1
H
WARNING:
4
• When assembling the bassinet, ensure the hook and loop tabs are fastened
• over the metal rods.
• Use the stroller on flat or gentle sloping surfaces. It may be unstable on
• higher sloping and uneven surfaces - be aware of the possibility of the
• stroller tipping over.
• Care should be taken if the stroller is used on stairs or escalators.
• Care must be taken when folding and unfolding the product to prevent
• finger entrapment.
• Check all parts before use for breakage or fatigue. Discontinue use
• immediately if any part is found to be damaged or broken.
• Do not add another mattress on top of the mattress provided or
• recommended by the manufacturer.
• The basket can carry a maximum load of 2kg.
• This product is suitable to be used with a new born baby. Please ensure the
• seat is in its full recline position when using with a new born child.
• Do not carry additional children. This stroller is manufactured for the use
• with one child only.
• Any load attached to the handle and/or on the back of the backrest and/or
• on the sides will affect the stability of the product.
• Always be aware of the risks provided by fire and other significant sources
• of heat such as radiators etc. which may be in the immediate vicinity of your
• stroller.
• Be aware of the risk of open fire and other sources of heat, such as electric
• bar fires, gas fires etc. in the vicinity of the stroller.
• It may be unsafe to use any accessories other than those approved by
• manufacturer.
• Keep the plastic packaging away from children to avoid danger of
• suffocation.
• Take extra care in windy conditions.
• Lift and carry the stroller safely. Please ensure all locking devices are
• engaged before lifting stroller - injuries can occur from moving parts. Only
• carry stroller if folded and locking or storage latches are engaged. Please
• apply storage latch if latch does not engage automatically.
• Never leave a raincover, hood or apron on the product indoors, in a hot
• atmosphere or near a heat source, as your child may overheat.
• To prevent damage, always remove a raincover before folding the pram.
• This product is intended for domestic use only. It is not for commercial use.
A
Unpack all contents and check that all parts are present before starting
assembly. Please refer to the parts list.
1a. Release the chassis (A) from the locked folded position. Lift the folding
latch on the side of the frame.
1b. Lift the handle to open the chassis.
1c. When the chassis is completely open, you will hear a “click” indicating it
is locked into place.
Chassis Assembly
6
1
23
CLICK
2a. Push each rear wheel (C) into the sides of the rear wheel axle until you
hear a “click”. Give them a tug to ensure they are attached securely.
2b. To remove the rear wheels, simply pull out the metal latch located
underneath the rear wheel axle and pull the wheel off.
C
Chassis Assembly
7
CLICK
3a. Insert each of the front wheel (B) pins into the center of the socket until
you hear a “click”. Give each wheel a firm tug to ensure they’re securely
attached.
3b. To remove the front wheels, simply press the button at the back of
the wheel socket and pull down.
Chassis Assembly
8
CLICK
B
1. On the rear of the seat unit (E), fasten the hook and loop panels as
illustrated.
WARNING:
The fabric must cover the metal bracket.
Bassinet Mode
9
2a. Attach the seat unit to the
chassis. Line up the seat
connectors with the chassis
housing and press downwards.
Listen for a “click” to signal
correct assembly.
CLICK
E
2b. Push the button located both sides of the seat connectors to remove the
seat unit from the chassis.
Bassinet Mode
10
12
3. Insert the bumper bar (D) into the seat unit slots ensuring that the release
buttons are on the outside and you hear a “click”.
Give the bumper bar a tug to ensure it’s securely in place.
To remove the bumper bar, simply press the release buttons on either or
both sides and lift up.
D
CLICK
4. Fasten the apron (G), secure the zip around the side and attach the hook
and loop fasteners over the bumper bar.
5a. Attach the canopy (F) to the seat unit.
First attach the plastic canopy clips to their respective sides, ensuring
that they sit over the small plastic guides located on each side of the seat
unit frame.
5b. Next, secure the canopy to the frame with the zip. Start with the right
side (when facing the seat).
G
F
Bassinet Mode
11
1
2
1. Press buttons both sides of the seat connectors to remove the seat unit
from the chassis.
2. Fasten the webbing belts located on the rear side of the seat unit footrest.
Listen for the “click” to signal buckles are secure.
Stroller Mode
13
2
CLICK
CLICK
1
Suitable from birth in bassinet mode up to a maximum weight of 9kg or until
the child can sit up unaided, roll over or push itself up on its hands and knees.
Bassinet Mode
12
WARNING:
Never use in bassinet mode with seat unit forward
facing.
4a. The seat unit is reversible in stroller mode. It can be forward or rearward
facing.
forward
facing
rearward
facing
4b. Press buttons both sides of the seat connectors to remove the seat unit
from the chassis.
To re-attach the seat unit to the chassis, line up the seat connectors with the
chassis housing and press downwards. Listen for a “click” to signal correct
assembly.
Stroller Mode
15
2CLICK
1
3
3a. Re-attach the seat unit to the chassis.
Locate the backrest adjustment mechanism at the rear of the seat unit.
Squeeze the clip on the reclining harness and gently pull up the backrest.
3b. Press buttons both sides of the seat connectors to adjust the seat unit
recline. Ensure you hear a “click” as the seat engages at your desired position.
Stroller Mode
14
2
1
WARNING:
The seat unit is not suitable in stroller mode for children
under 6 months.
2
1
16 17
1. Slide the shoulder strap buckle onto the housing of the waist strap buckle.
Repeat for the other side.
2. Insert the completed buckle into the buckle housing until it engages securely
in place. Listen for the ‘click’. Repeat for the opposite side.
1 2
3. Press the centre button to release child from harness.
Harness
4. To adjust the shoulder straps, move the slides as shown.
WARNING!
Always adjust the harness to fit your child
correctly for their comfort and safety. A loose fitting harness can be very
dangerous.
5. There are 3 shoulder height positions.
Undo the harness and remove the shoulder pads to adjust the shoulder height.
Remove harness strap from webbing holders. Redo harness.
WARNING!
Always adjust the shoulder strap height
according to baby height.
45
3
2
1
Harness
When travelling along straight surfaces or uneven terrain, the front wheels
may spin.
To lock the front swivel wheels into place, twist the top of the wheel socket
so the notch is towards the front.
To go back to 360° swivel mode, twist top of the wheel socket so the notch
is towards the back.
Swivel Wheels
19
1. The canopy can be opened or closed by pulling forward or backward on
the canopy rim.
2. The canopy features a mesh window for ventilation and to keep an eye on
baby in forward facing position.
Canopy Adjustment
18
Press down on the brake pedal to engage the brake. Listen for the “click”
signalling that the brake is locked.
Push the brake pedal upwards to disengage the brake.
Brakes
20
WARNING:
Always apply the parking brake when the stroller is not
moving.
WARNING:
Always apply the brake when you are placing and
removing the child.
CLICK
WARNING:
Always apply the brake when you are making
adjustments to the stroller i.e. changing seat direction.
1
2
CLICK
Locate the raincover (H). Pull the raincover down over the stroller starting at
the top of the canopy and pulling down towards the footrest.
NOTE. The raincover will fit in both stroller and bassinet mode.
Raincover
21
H
3a. Located on the handle, slide the folding lock button across to the right.
At the same time, push up the safety lock.
3b. Push the handle downwards.
4. The locking catch will engage automatically.
Folding
23
WARNING:
To avoid injury ensure that your child is kept away
when unfolding and folding this product.
1
2
CLICK
3
1a. If folding with the seat unit attached, it must be forward facing. If the seat
unit is rearward facing, either remove the seat unit or change to forward facing
before folding.
1b. Always fold the canopy before folding.
2. If the swivel wheels are locked, twist the top of the wheel socket so the
notch is towards the back.
This will ensure the wheels can move and do not touch the bar when the
chassis is folded.
Folding
22
• This product requires regular maintenance to ensure correct and safe
• performance.
• All assembly fittings are to be tightened properly.
• Always check your stroller for loose screws, worn parts, torn material or
• stitching.
• Replace or adjust parts as needed.
• Lubricate moving parts regularly, especially the wheels.
• Wipe metals and plastics clean with a damp cloth.
• Sponge clean fabrics with warm soapy water. Rinse well with clean water
• to avoid staining. Dry in shade.
• Do not bleach.
• Do not iron.
• Do not dry clean.
• Do not use abrasive pads, bleach or strong household cleaners.
Care and Maintenance
Table of contents
Other mompush Stroller manuals
