1 CLEAN
Clean bottles, teats and accessories
thoroughly with warm soapy water.
Remove any milk residue. Rinse with
cold water.
2 PREPARE THE MILTON SOLUTION
Fill your Milton Combi with cold water to
the 5L mark.
Add 2 standard Milton Anti-bacterial Tablets
or 30 ml (1 capful) of Milton
Anti-bacterial Solution.
3 ADD ITEMS TO THE SOLUTION
Wash your hands.
Fully submerge items in the solution to
remove any trapped air bubbles.
When you screw on the Combi lid the
integral submerger will then ensure that
all items are kept in the solution.
Screw on lid. Press the vent down if it is raised.
Items are ready to use after 15 minutes.
Remove the items you need and shake off excess water –
THERE IS NO NEED TO RINSE.
Replace the solution every 24 hours.
1 CLEAN
Clean bottles, teats and accessories
thoroughly with warm soapy water.
Remove any milk residue. Rinse with
cold water.
2 FILL
Pour 200ml of water in your Milton Combi
base. Then load items upside down.
IMPORTANT: Your Milton Combi will not
sterilise properly unless the correct amount
of water is added. You can use a baby
bottle to measure exactly 200ml of water.
3 LOAD AND CLOSE
Load bottles with the opening face down.
Screw on the lid. Press the safety vent down
if raised. When steam pressure builds up
inside Combi the safety vent will pop out
automatically.
4 MICROWAVE
2 mins at 1100-1850W
4 mins at 850-1000W
6 mins at 500-800W
5 COOL AND USE
For safer handling, leave the Milton Combi
to cool inside the microwave for at least
3 minutes after the microwave cycle has
finished. Remove the Milton Combi using
oven gloves to prevent scalding.
Wash your hands well before handling sterilised items. Unscrew
the lid and take the contents out using tongs.
If you don’t want to use your bottles straight away after
microwaving, press the pop-up safety vent back down to keep
the bottles inside the Milton Combi sterile for longer.
The Cold Water Method
1
The Microwave Method
2
mins
2
The Microwave Method
2
Did you know?
With the Cold Water method of sterilisation, items can be left
in the solution until you need them and will stay sterile in the
solution for 24 hours. Items can be added and removed from
the same solution throughout the day.
How to get the best from your Combi Steriliser:
Check the power of your microwave before you begin using it.
Dry your Milton Combi well after each use to prevent a build-up
of limescale.
For optimum effectiveness descale once a month.
The individual parts of the Milton Combi can be cleaned in the
dishwasher.
To remove the submerger from the lid for
cleaning, insert fingers into the holes as
shown and twist anti-clockwise. Reverse
the procedure to re-attach to the lid.
It is only necessary to use the submerger when using the cold
water sterilising method, although for convenience it can still be
left attached to the lid when sterilising in a microwave.
2
Did you know?
If the Milton Combi is left unopened after microwaving and the
safety vent is closed, items will remain sterile in the Milton Combi
for up to 24 hours.
ways to sterilise choose the most convenient method for you!
Ask the experts:
Why should I sterilise?
During your little one’s first 12 months, their immune system is still
developing so they need extra protection from germs that may
cause gastroenteritis and other nasty bugs. To do this, you need
to make sure that all feeding equipment is clean and properly
sterilised.
How long should I sterilise for?
Right up until your baby’s first birthday
What should I sterilise?
Basically everything that can go into your baby’s mouth!
This includes bottles, teats, soothers, plastic feeding spoons,
weaning bowls, teething rings, toys as well as your breastfeeding
accessories such as breastpump parts and milk storage
containers.
Did you know?
At 6 months old, your baby’s immune system is at its weakest and
even at 1 year they will only have around 17% of adult immunity
levels against the germs that cause diarrhoea and vomiting.
For more information,take a look at our website at:
miltonbaby.com.au
IMPORTANT: Your Milton Combi is specially designed for use solely with
Milton Anti-bacterial Tablets or Solution. Other sizes or makes of tablet/
solution could damage your Milton Combi and affect its performance.
On the product packaging of the Tablets, you may notice that you need
to use 2 tablets for 4L of water. For your Combi, you only need to use 2
tablets for 5L of water. The disinfecting solution will still be effective.
WARNINGS: Avoid contact with base metal, silverware, silks, woollen or
coloured fabrics (may bleach).
THIS PRODUCT MAY BREAK IF DROPPED WHILE FULL
OF WATER
WARNINGS FOR USE IN THE MICROWAVE:
Check the power of your microwave before you begin using it.
Check that the accessories you want to sterilise can be
microwaved.
Always keep the microwave turntable clean and dry before use.
For smaller microwaves, the turntable may need to be removed
to allow the Milton Combi to fit in.
Always ensure that your Milton Combi is clean with no old water
residue before use in the microwave.
The Milton Combi contains boiling water when in use. Handle
with care and keep out of the reach of children.
Always wait 3 minutes before removing the Milton Combi from
the microwave to let it cool down. Ensure that you take care, as
it will contain hot water and steam. Always place it on a hard,
heat-resistant surface. Use oven gloves and once the lid is
unscrewed, open it away from you to allow the steam to escape.
Do not use Milton Anti-bacterial Tablets or Solution inside the
Milton Combi when placed inside your microwave.
Do not use metallic items in your Milton Combi as this could
damage your microwave.
The Cold Water Method
1
mins
2
x 200ml
Milton_Combi_Aus_6pg_Leaflet_2018.indd 4-6 19/03/2019 12:19
