Milwaukee M12 FCOT User manual

M12 FCOT
คูคู่มือการใช้

2
5
10
12
14
8
9

3
17
8
4
11
17
18
16
START
STOP

4
click
1
1
2
2
Remove the battery
pack before starting any
work on the product.
在產品上開始任何工
作之前，請先取出電
池組。
对产品进行任何工作
前，先移除电池。
제품에서 어떠한 작업을
시작하기 전에 배터리
팩을 제거하십시오.
ถอดชุดแบตเตอรี่ออกก่อน
เริ่มกระทําการใด ๆ กับ
ผลิตภัณฑ์
Lepaskan paket baterai
sebelum memulai
pekerjaan apa pun pada
produk.

5
1
22-3 sec
100% 75% 50% 25%

6
1
2
3

7
4
ø 10 mm

8
START
STOP

9

10
!
!
!

11
1
2
!
!
click...click...click...click...
click...click...click...click...

12
1
2
3

13
4
5
6
click

14
11
2
3

15
11
2
3
Adjust the cutting depth
to the thickness of the
workpiece.
將切削深度調整為工件
厚度。
将切削深度调整为工件
厚度。
절단 깊이를 작업편
두께로 조절하십시오.
ปรับความลึกในการตัดตาม
ความหนาของชิ้ นงาน
Sesuaikan kedalaman
pemotongan dengan
ketebalan benda kerja.

16
2
1
1
2
3
Accessory
配件
附件
부속품
อุปกรณ์เสริม
Aksesori

Adjust the cutting depth
to the thickness of the
workpiece.
將切削深度調整為工件
厚度。
将切削深度调整为工件
厚度。
절단 깊이를 작업편
두께로 조절하십시오.
ปรับความลึกในการตั ดตาม
ความหนาของชิ้ นงาน
Sesuaikan kedalaman
pemotongan dengan
ketebalan benda kerja.
17

18
!
!
!

19

20
English
20
TECHNICAL DATA M12 FCOT
No-load speed 20000 min-1
D=Cutting disk diameter max 76 mm
d=hole diameter 10 mm
b=Cutting disk thickness min/max 1 mm / 3.2 mm
Cutting depth 16.3 mm
Cutting width min 1 mm / max 3.2 mm
Battery voltage 12 V
Weight according to EPTA-Procedure 01/2014 (6.0 Ah) 1.3 kg
Recommended ambient operating temperature -18 – +50 °C
Recommended battery types M12B2 – M12B6
Recommended charger C12C, M12C4, M12-18AC, M12-18C,
M12-18C3, M12-18FC…
Noise/Vibration information (cutting concrete)
Measured values determined according to EN 60745.
Typically, the A-weighted noise levels of the tool are:
Sound power level (Uncertainty K=3dB(A)) 105 dB(A)
Sound pressure level (Uncertainty K=3dB(A)) 94 dB(A)
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value ah, SG 2.9 m/s2
Uncertainty K 1.5 m/s2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
CUT-OFF MACHINE SAFETY WARNINGS
a. The guard provided with the product must be
securely attached to the power tool and positioned
for maximum safety, so the least amount of wheel is
exposed towards the operator. Position yourself and
bystanders away from the plane of the rotating wheel.
The guard helps to protect operator from broken wheel
fragments and accidental contact with wheel.
b. Use only bonded reinforced or diamond cut-off wheels
for your power tool. Just because an accessory can
be attached to your power tool, it does not assure safe
operation.
c. The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
tool. Accessories running faster than their rated speed can
break and fly apart.
d. Wheels must be used only for recommended
applications. For example, do not grind with the side
of cut-off wheel. Abrasive cut-off wheels are intended for
peripheral grinding, side forces applied to these wheels
may cause them to shatter.
e. Always use undamaged wheel flanges that are of
correct diameter for your selected wheel. Proper wheel
flanges support the wheel thus reducing the possibility of
wheel breakage.