Milwaukee M18 FBS85 User manual

M18 FBS85


2
12
19
8
10
6

3
1214
4
17
15
16
START
STOP

4
1
1
2
2
click
Remove the battery pack before
starting any work on the product.
對產品進行任何工作前，先移除
電池。
对产品进行任何工作前，先移除
电池。
제품 사용 전, 배터리 팩을
제거하십시오.

 
Lepaskan paket baterai sebelum
memulai pekerjaan apa pun pada
produk.

5
78-100 %
55-77 %
33-54 %
10-32 %
< 10 %

6
1
2
3

7
4

8
1
2
3
1
2

9
4

10
1
2
3
1
2

11
4
5
6
1
2

12
START
STOP
1
2

13
Insulated gripping surface
絕緣的握持表面
绝缘的握持表面
절연 그립 표면
 
Permukaan genggam
berinsulasi

14
1
2

15
4-5 mm
< 4 mm
8-13 mm
5-13 mm
5-8 mm
4-8 mm
X = 2.5 mm
X = 2.5 mm / 1.8 mm
X = 1 mm
X = 1.8 mm
X = 1.8 mm / 1.4 mm
X = 1.4 mm
X

16
Hold the product firmly with both
hands.
用雙手牢固握住產品。
用双手牢固握住产品。
양손으로 제품을 꽉 붙잡으십시오.

Pegang produk dengan erat
menggunakan kedua tangan.
Do not place hands on or around the
guard or blade while the battery pack
is connected to the product.
將電池組連接到產品時，請勿將手放在
護板或刀片上或周圍。
将电池组连接到产品时，请勿将手放在
护板或刀片上或周围。
배터리 팩이 제품에 연결된 상태에서
가드 또는 블레이드나 그 주변에 손을
대지 마십시오.
 


Jangan meletakkan tangan di atas
atau di sekitar pelindung atau bilah
pisau saat baterai terhubung ke
produk.

1
17
1
2

18

15 sec
19

20
English
20
TECHNICAL DATA M18 FBS85
No-load speed 0-164.59 m/min
Blade size 899 x 13 x 0.51 mm
Cutting capacity (rectangular stock) 85 x 85 mm
Cutting capacity (pipe) ø 85 mm
Battery voltage 18 V
Weight according to EPTA-Procedure 01/2014 (2.0 Ah – 12 Ah) 3.9 – 5.0 kg
Recommended ambient operating temperature -18 – +50 °C
Recommended battery types M18B, M18 HB
Recommended charger M12-18C, M12-18AC, M12-
18FC, M12-18C3
Noise/vibration information
Measured values determined according to EN 60745.
A-weighted sound pressure level 82.63 dB (A)
Uncertainty K 3 dB (A)
A-weighted sound power level 93.63 dB (A)
Uncertainty K 3 dB (A)
Wear ear protectors!
Sawing of metal
Vibration emission value ah1.38 m/s2
Uncertainty K 1.50 m/s2
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one product with another. It may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission level represents the main applications of the product. However, if the product is used
for different applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the product is turned off
or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintaining the
product and the accessories, keeping the hands warm, and organising work patterns.
WARNING! Read all safety warnings, instructions,
illustrations, and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
BAND SAW SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces when
performing an operation where the cutting accessory may
contact hidden wiring. Cutting accessory contacting a “live”
wire may make exposed metal parts of the power tool “live” and
could give the operator an electric shock.
Wear ear protectors. Exposure to noise can cause hearing
loss.
Do not start the blade when it is in contact with the workpiece.
Wait for the blade to reach full speed before beginning the cut.
When the blade is binding, or when interrupting a cut for any
reason, release the trigger and hold the cutter motionless in the
material until the blade comes to a complete stop. Never restart
the machine when the blade is in contact with workpiece.
Do not use cracked or distorted saw blades.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Use protective equipment. Always wear safety glasses when
working with the product. Use protective clothing, such as dust
mask, protective gloves, sturdy non-slip footwear, helmet, and
ear defenders.
The dust produced when using the product may be harmful to