
8
English
8
TECHNICAL DATA M18 AL
Output Watts 20 W
Lighting time with one fully charged battery (3.0 Ah)
3 h
6h
Battery voltage 18 V
Weight according to EPTA-Procedure 01/2003 2.1 kg
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the
product.
Do not dispose of used battery packs in the household refuse
or by burning them. Milwaukee Distributors offer to retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only compatible Milwaukee chargers from the same
battery platform for charging battery packs. Do not use battery
packs from other systems.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case
of eye contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
Warning: Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not even from
a distance). Staring into the light beam may result in serious
injury or vision loss.
Don‘t use the product in wet areas .
SPECIFIED CONDITIONS OF USE
The area light is intended to be used as a light source away
from the mains supply.
Do not use the product in any way other than stated for normal
use.
BATTERIES
Battery packs which have not been used for some time should
be recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life, remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
-Store the battery pack where the temperature is below 27°C
and away from moisture
-Store the battery packs in a 30% - 50% charged condition
-Every six months of storage, charge the battery pack as
normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance
with local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations. Transport
preparation and transport are exclusively to be carried out
by appropriately trained persons and the process has to be
accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
Do not disassemble the worklight. The LED light cannot be
replaced.
Use only Milwaukee accessories and spare parts. Should
components need to be replaced which have not been
described, please contact one of our Milwaukee service
agents.
If needed, an exploded view of the tool can be ordered. Please
state the article no. as well as the machine type printed on the
label, and order the drawing at your local service agents.