Mimosa LITE BUDDY SCOOTER User manual
Malaysia Importer/Distributor:
Global Retail Network Sdn. Bhd. (921399-V)
Wisma Pang Cheng Yean, Lot 5205C,
Jalan Perindustrian Balakong Jaya 1/3,
Taman Perindustrian Balakong Jaya,
43300 Seri Kembangan, Selangor Darul Ehsan, Malaysia
Tel: (03) 8940 6638
Hong Kong Importer/Distributor:
Trade Solutions Ltd
Unit D, 13A/F, Gemstar Tower, 23 Man Lok Street,
Hunghom, Kowloon, Hong Kong
Singapore Importer/Distributor:
Kim Hin Innovation Labs Private Ltd.
601 Sims Drive, Pan-I Complex, Singapore 387382
Tel: (65) 6831 5020
MIMOSA
LITE BUDDY SCOOTER
User Manual
This scooter is suitable from 1 to 3 years old and the
maximum load is 20kg. This scooter has been designed to
comply with EN 71.
Important – Please read the instruction before assembly.
44lbs
20kg
Up to
21
CONTENTS 2. SCOOTER PARTS AND COMPONENTS
1. SAFETY INFORMATION.............................................................................................1
2. SCOOTER PARTS AND COMPONENTS.................................................................2
3. ASSEMBLING THE SCOOTER..................................................................................3
4. ADJUSTING THE HANDLE BAR HEIGHT...............................................................4
5. ADJUSTING THE FOOTREST...................................................................................5
6. OPERATING THE SCOOTER.....................................................................................5
7. FOLDING THE SCOOTER..........................................................................................6
8. USING THE SHOULDER STRAP FOR CARRYING THE SCOOTER.....................7
9. CLEANING AND MAINTENANCE...........................................................................8
1. SAFETY INFORMATION
Please read this user manual carefully before using this product.
Important - Keep these instructions for future reference.
• You alone are responsible for the safety of your child.
• Never let your child ride the Lite Buddy scooter unsupervised.
• The Lite Buddy must be guided by an adult.
• To avoid serious accidents, never let go of the push handle when there is a child on the
Lite Buddy scooter.
• While your child is riding, make sure that they hold the handle grip and place their feet on
the footrest provided.
• The Lite Buddy scooter is not suitable for steep uphill and downhill gradients or travelling
up and down steps.
• Use this product for only one child at a time.
• Whenever possible, avoid using the Lite Buddy scooter on roads.
• Always follow the traffic rules and regulations.
• Do not allow your child to travel faster than 5 km/h to avoid accidents.
• During adverse weather conditions, the risk of accident and injury increases considerably.
Never use the Lite Buddy scooter when the road is wet.
• Do not ride on wet, greasy, sandy, muddy, rough and uneven surfaces.
• To avoid injury, ensure that your child is kept away when unfolding and folding
this product.
Push bar
Front wheel
Footrest
Rear wheel
Push bar connector
Push handle
Safety bumper
Seat
Height
adjusting bar
Seat lock
Handle grip Height
adjusting
button
43
3. ASSEMBLING THE SCOOTER
4. ADJUSTING THE HANDLE BAR
1. Lite Buddy scooter comes with 4
components - scooter frame, push
bar, push bar connector and carry
strap.
2. Unfold the scooter frame and push
the seat down until you hear a ‘click’
sound, to ensure that the seat is
locked in place.
3. Attach the push bar connector to
the the push bar. Match the groove of
the push bar to the protruding part in
the height adjusting bar on the
scooter frame.
4. Depress the height adjusting
button as you slot in the push bar into
the height adjusting bar.
WARNING! Before using the Lite Buddy, please make sure the push bar and screws
are tightened. Check that the wheels show no sign of wear.
5. Adjust the push bar to your
preferred height. The height adjusting
button should protrude out of a hole
along the height adjusting bar.
6. Tighten the push bar connector to
make sure that the push bar and the
height adjusting bar are tightly
connected.
Your Lite Buddy scooter is fully
assembled for your use!
1. Loosen the push bar connector and
press down the height adjusting
button.
Adjust the push bar to your preferred
height - there are 2 different height
positions.
The height adjusting button should
protrude out of the hole of your
preferred height along the height
adjusting bar.
65
5. ADJUSTING THE FOOTREST 7. FOLDING THE SCOOTER
6. OPERATING THE SCOOTER
1. Turn the footrest lock anti-
clockwise and unscrew its screw to
unlock the footrest.
2. Adjust footrest to suitable height.
Tighten the screw of the footrest lock
and turn the footrest lock clockwise to
lock the footrest in place.
1. Rotate the push handle to control
the direction of scooter.
Make sure that the safety bumper is
enclosing the seat before you place
your child on it.
1. Loosen the push bar connector,
depress the height adjusting button
and push the push bar completely into
the height adjusting bar.
2. Pull the seat lock until you hear a
‘click’ sound to unlock the seat. Lift up
the seat.
3. Fold the scooter together and
secure it in place by ensuring that the
height adjusting bar is pushed into the
slot under the seat.
87
8. USING THE CARRY STRAP FOR CARRYING THE SCOOTER
1. The carry strap comes in 2 parts -
the buckle strap is to lock the strap to
the scooter and shoulder straps are for
users to carry the scooter over their
shoulders.
2. Wrap the buckle strap around the
folded scooter frame. Fasten the
buckle to secure the carry strap on the
scooter frame.
3. Carry the scooter with the shoulder
straps over your shoulders or slung on
a single shoulder if preferred.
Periodically check that all screws are tightened and the wheels are in good condition.
Periodically check the scooter for damaged or worn parts. Do not use this scooter if
any part is damaged or worn.
It is recommended to clean the Lite Buddy scooter regularly in order to maintain
optimum functioning. Clean Lite Buddy scooter with a damp, soft cloth and air dry.
9. CLEANING AND MAINTENANCE
Table of contents
