Mimosa First Class Travel System User manual

Malaysia Importer/Distributor:
Global Product Solutions Sdn. Bhd. (705154-M)
Wisma Pang Cheng Yean, Lot 5205C,
Jalan Perindustrian Balakong Jaya 1/3,
Taman Perindustrian Balakong Jaya,
43300 Seri Kembangan, Selangor Darul Ehsan, Malaysia
Tel: [phone]
[email protected]
Hong Kong Importer/Distributor:
Trade Solutions Ltd
Unit D, 13A/F, Gemstar Tower, 23 Man Lok Street,
Hunghom, Kowloon, Hong Kong
Singapore Importer/Distributor:
Global Outsource Solutions Pte Ltd
601 Sims Drive, Pan-I Complex, Singapore 387382
Tel: [phone]
[email protected]
Stroller suitable from birth to 36 months and the maximum load is 15kg.
Infant Car Seat suitable from birth to 12 months and the maximum load is 13kg.
Important – Please read the instruction before assembly.
33lbs
15kg
FIRST CLASS TRAVEL SYSTEM
Stroller user Manual

CONTENTS 1. SAFETY INFORMATIONS
1. SAFETY INFORMATION...............................................................................................................................2
2. FIRST CLASS TRAVEL SYSTEM PARTS.............................................................................................3
3. ASSEMBLE THE STROLLER......................................................................................................................5
4. SECURE THE HARNESS..............................................................................................................................7
5. BRAKES ADJUSTMENT...............................................................................................................................7
6. ADJUSTING RECLINE POSITION..........................................................................................................8
7. ADJUSTING LEG REST..................................................................................................................................8
8. ADJUSTING HANDLE....................................................................................................................................9
9. FOLDING THE STROLLER...........................................................................................................................9
10. USING INFANT CAR SEAT WITH STROLLER.........................................................................10
11. CLEANING AND MAINTENANCE...................................................................................................11
21
Please read this user manual carefully before using the First Class Travel
System. Please keep this user manual for future reference.
• The stroller is suitable for children under 36 months. The max load of the
stroller is 15kg. Never overload.
• Never leave your child unattended.
• Ensure that all the locking devices are engaged before use.
• The brake system must be engaged when placing your child in the stroller or
taking your child out of the stroller.
• Do not let your child play with this stroller.
• Always use the restraint system.
• Do not use if any part is broken, torn or missing.
• Accessories which are not approved by the manufacturer/distributor shall not
be used.
• Avoid placing the stroller near naked heat sources such as electric bar fires,
gas fires, etc., or where a child could gain access to any other kinds of
hazards.
• Always use the crotch strap in combination with the waist belt.
• Always use the harness provided and make sure the harness is correctly
fitted.
• Any load attached to the handle and/or on the sides of the stroller will affect
the stability of the stroller.
• Use the stroller for only one child at a time.
• The maximum permissible loading for shopping basket is 5kg.
• Only replacement parts supplied or recommended by the
manufacturer/distributor shall be used.
• Please use the most reclined position for new born baby as the baby does
not have the ability to control its head.
• Do not allow child to stand on the stroller seat.
• This product is not suitable for running or skating.
• To avoid injury ensure that your child is away when unfolding and folding this
product.

2. FIRST CLASS TRAVEL SYSTEM PARTS
3 4
Stroller frame
Handle bar
Release trigger
Brake lever
Shopping
basket
Front wheel
Footrest
5-point
harness system
Front bumper
Canopy
Rear wheel
Adjustment
button
Seat
Canopy Front bumper
Front wheels Rear wheels

3. ASSEMBLE THE STROLLER
5 6
1. First, unfold the stroller frame
by stepping on the rear tube and
pulling the handle bar upwards.
Next, push forward until the
folding hinge is fully engaged.
The folding mechanism will lock
in place when the legs are fully
extended.
2. To attach the front wheels,
push wheel into front leg tube
until it clicks into place. Repeat
on the other side.
To remove, press release button
on the side of wheel hub and
pull wheel from hub.
Note: Pull on wheels to ensure
both of them are securely
attached to the stroller.
3. To attach the rear wheels, push
wheel into rear frame until it
clicks into place. Repeat on the
other side.
To remove, press release button
and pull wheel from hub.
Note: Pull on wheels to ensure
both of them are securely
attached to the stroller.
4. To install the seat, align the
seat with the anchors on the
sides of the stroller frame. Click
the seat into place. The seat may
be installed in either forward or
rear-facing position.
5. Insert the front bumper into
connector on the stroller frame
as shown. Pull on the front
bumper to make sure it is
attached securely.
Note: The bumper must be
securely attached before using
this product.
6. Insert the canopy clips into
the slot located on each side of
the seat.
To open canopy, push forward
while holding the rear of canopy
in place. To close, push to the
rear of stroller.
FORWARD-FACING REAR-FACING
RELEASE BUTTON

4. SECURE THE HARNESS
6. ADJUSTING RECLINE POSITION
5. BRAKES ADJUSTMENT
7 8
1. Slide the shoulder strap buckle
①into the housing of the waist
strap buckle ②.
Repeat on the other side.
Insert the completed buckle ③into
the crotch buckle ④until it
engages securely in place. Repeat
on the opposite side.
To release buckle, press the button
on the crotch buckle ④.
Rear wheels
2. To engage brakes, step on the
brake lever located on the rear
axle. If necessary, gently push
the stroller back and forth to
fully engage the brake.
Make sure the brakes are fully
engaged.
To release, gently lift up the
brake lever.
The stroller seat has 3 recline
positions - upright, half-reclined
and fully reclined position.
Press the recline button at the
back of the seat and adjust the
seat into the desired position.
2. To change the shoulder strap
position, reach one hand behind
the stroller and pull the retainer
out from the front of seat then
re-insert into the desired set of
slots that are closest to your child’s
shoulder.
Repeat with other harness strap.
When re-inserting the harness
straps, Make sure to always place
harness straps at the same height
setting.
Front wheels
1. The front wheels are equipped
with a swivel locking device.
To lock, push the button down.
To unlock, push the button up.
7. ADJUSTING LEG REST
Press the buttons on both sides
of the leg rest support to adjust
up and down until the desired
position.
FIX RELEASE
ENGAGE RELEASE
PRESS

8. ADJUSTING HANDLE
9. FOLDING THE STROLLER
10. USING INFANT CAR SEAT WITH STROLLER
910
1. Align the infant car seat with
the anchors on both side of the
stroller frame and push them
into the anchors until they click
into place.
Note: Infant car seat must face
parent as shown.
3. Make sure the front wheels lie
flat, then secure the stroller in
the folded position with the fold
strap, located on the right side
of the stroller through the rear
frame.
2. Remove the infant car seat off
the stroller before folding the
stroller frame.
1. Before folding the stroller,
close the canopy and align the
front wheels parallel to the
stroller.
Note: The stroller cannot be
folded which the seat is in
rear-facing (i.e. parent facing)
position
2. To fold the stroller frame, pull
both release triggers and press
handle down towards the floor.
To adjust the handle, press the
release buttons to move it up or
down into a comfortable
position for the user.
Note: Make sure the handle
clicks into place before using.
RE LEAS E BUTT ON
PRESS

11. CLEANING AND MAINTENANCE
11 12
Periodically check the infant car seat and stroller for damage or worn parts. Do not
use this infant car seat or stroller if any part is damaged or worn.
5-point harness buckle
A 5-point harness buckle is a safety feature. Please use water to clean the 5-point
harness buckle as food, drink and other residues may easily accumulate in the buckle.
If the buckle is jammed, please contact manufacturer or retailer.
5-point harness belts and plastic components
Wipe the 5-point harness belts and plastic components with warm water and mild
soap.
Stroller basket
Basket hand wash only.
Do not fold or store the product while wet and never store in a damp environment as
this can cause mildew. Avoid placing heavy objects on top of the seat.
Stroller fabric
Fabric parts may be cleaned in accordance with the fabric care labels. Do not
machine wash. Stroller seat can wipe clean with damp cloth if necessary.
Cover: 100% Polyester
Wipe clean with damp cloth if necessary.
Do not leave the stroller exposed to heat i.e. by a radiator or in direct sunlight.
If the stroller chassis parts have been exposed to salt water we recommend that they
be rinsed down with pure water as soon as possible afterwards.
DO NOT
IRON
DO NOT
DRY CLEAN
DO NOT
TUMBLE DRY
DO NOT
BLEACH
DO NOT
MACHINE WASH