Mini Gadgets Bush Baby Stealth User manual

pg. 1
Bush Baby Stealth
Manual

pg. 2
BEFORE YOU GET STARTED
IMPORTANT INSTRUCTIONS BEFORE GETTING
STARTED
If your device is operated by a battery, your
product will come with the battery disconnected.
Before attempting to use the battery, please make
sure to charge the battery using the included
battery charging adapter.
If your device has a power cord attached to it
so it plugs into the wall, you do not need to worry
about the above.
IMPORTANT WARRANTY INFORMATION: Please do
not remove the warranty sticker on your device,
we need this to identify the date built and who
built the device. If this has been removed or
tampered with, it may affect the lifetime warranty
on the device. You may be charged fees or denied a
return.

pg. 3
TABLE OF CONTENTS
BEFORE YOU GET STARTED..................................... 2
TABLE OF CONTENTS .............................................. 3
GET FAMILIAR WITH YOUR DEVICE......................... 4
CHARGING THE BATTERY........................................ 5
HOW TO POWER ON THE CAMERA ........................ 6
HOW TO RECORD CONTINUOUS VIDEO ................. 7
HOW TO RECORD WITH MOTION DETECTION ....... 8
HOW TO TAKE A PHOTO......................................... 9
HOW TO RETRIEVE FILES OFF THE MICROSD CARD -
WINDOWS ............................................................ 10
HOW TO RETRIEVE FILES OFF THE MICROSD CARD -
WINDOWS ............................................................ 11
HOW TO RETRIEVE FILES OFF THE MICROSD CARD -
MAC...................................................................... 12
HOW TO SET THE DATE/TIME STAMP .................. 13
TROUBLESHOOTING ............................................. 14
TECHNICAL SPECIFICATIONS................................. 15

pg. 4
GET FAMILIAR WITH YOUR DEVICE

pg. 5
CHARGING THE BATTERY
1. Connect the battery to the battery charging
adapter following the picture guide below.
2. The battery will take between 6-8 hours to
charge.
3. The red LED on the battery charging adapter
will turn blue once the battery is fully charged.

pg. 6
HOW TO POWER ON THE CAMERA
1. Hold the A button on the remote control for 3
seconds and let go.
2. The device will vibrate for 1 second. The
device is in Standby mode and is now waiting
for commands from the remote control.
a. To power off, hold the A button for
another 3 seconds and let go while in
standby mode. The unit vibrates for 1
second and turns off.
b. After two minutes of being in standby
mode with no buttons being pressed, the
camera will automatically shut off.

pg. 7
HOW TO RECORD CONTINUOUS VIDEO
1. When the camera is in Standby Mode, press
the B button once quickly. The unit will vibrate
three times.
2. Once the device stops vibrating, it will start
recording video.
3. To stop the recording and save the video,
press the B button again. The device will
vibrate 3 times. The device is now in standby
mode again.

pg. 8
HOW TO RECORD WITH MOTION
DETECTION
1. In Standby mode, press the D button one
time. The unit will vibrate twice.
2. The unit is now in motion detection mode and
will begin recording video once motion is
detected. Note: there will be no indication
when the device detects motion –it will simply
start recording.
3. To return to standby mode and stop motion
detection recording, press the D button again.
The unit will vibrate twice. The unit is now in
standby mode.

pg. 9
HOW TO TAKE A PHOTO
1. When the camera is in Standby Mode, press
the C button. The unit will vibrate once. The
unit has now taken a picture and returns to
standby mode.

pg. 10
HOW TO RETRIEVE FILES OFF THE
MICROSD CARD - WINDOWS
1. Connect the MicroSD card to your computer
using the included MicroSD card reader.
2. If AutoPlay opens, choose ‘Open folder to
view files’.
3. Your videos will be in the VIDEO folder and
photos will be stored in the PHOTO folder.
●If Auto Play does not open or you use a Mac,
please continue on the next page.