MINICRAFT Cessna 150 User manual

37
39 40 41
42
Right Lower Wing
Left Lower Wing Upper Wing
Stand BaseSupport
38
COCKPIT ASSEMBLY
1LANDING GEAR ASSEMBLY 2
All Parts All Parts
4
13
23
7
19
18
8
17
16
15 14
Cockpit floor BLACK
Seats DARK and LIGHT GRAY
Rudder pedals (23) ALUMINUM
Firewall (8) BLACK
Tires BLACK-GRAY
Strut ALUMINUM
Cement
Coller
Kleben
Pegar
Incollare
Colar
Kleven
DO NOT Cement
Ne pas Coller
Nicht Kleben
No Pegar
Non Incollare
Nao Colar
Niet Kleven
Cut away
Couper
Scheiden
Cortar
Tagliere
Cortar
Snijden
Optional parts
Choix
Auswahlmoglichkeit
Eleccion
Scelta
Opaco
Keuze
Repeat operation
RŽpeeter l' opŽration
Vorgang wiederholen
Repitir la operacion
Ripetere
Repitir a opera•ao
Herhalen
Symmetrical assembly Drill hole
Your MINICRAFT Cessna 150 is a highly detailed replica of one
of the world's most popular civil aircraft. Please review the
assembly steps as well as the color and decal guide to become
familiar with the parts before beginning assembly.
IMPORTANT NOTE!
Paint all parts and apply decal stripes
to wheel fairings before continuing assembly.
Minicraft Models (US) LLC, 1501 Commerce Dr, Elgin IL 60123. www.minicraftmodels.com Printed in China
1 2 3 45618 19
20 21
22 23
27
25 26
24
10
98
7
11 12
13 14 15 16 17
28
29
30 31
34
35
36
32 33
Right Fuselage Half
Ventral Fin Fuselage plug
Left Fuselage Half
Shaded parts not used

FUSELAGE ASSEMBLY
3
NOSE GEAR AND STABILATOR MOUNTING, WING ASSEMBLY
4
All Parts
All Parts
55
41
42
34
34
9Right fuselage half
Left fuselage half
40 29
28
37 37 36 38
Right lower
wing
Left lower
wing
Upper wing
Seat back (5) DARK and LIGHT GRAY
Interior LIGHT GRAY
Instrument panel BLACK-GRAY
with SILVER and BLACK details
Control wheels BLACK
IMPORTANT NOTE!
Fuselage stripe decals must be applied before
mounting stabilators 28/29.
Refer to Paint & Decal Guide.
IMPORTANT NOTE!
You may choose to assemble wing struts 30/31
after final paint and decals are applied.
Refer to Paint & Decal Guide.
WINGS, STRUTS AND WINDSHIELD MOUNTING
5
All Parts
30
39
31

ENGINE ASSEMBLY
6
ENGINE / LOWER COWL INSTALLATION
7
All Parts
All Parts
21
22
25
35
32
33
26
624
Engine mount (24) BLACK
Engine accessories (6) , block (32/33) GUNMETAL
Carburator (35) BLACK
Cylinders (21/22) BLACK-GRAY
Exhousts (25/26) BURNT METAL
Cowl interior ALUMINUM
1
FINAL ASSEMBLY / OPTIONAL STAND
8
All Parts
Support
10
12
3
2
20
11
27
Stand Base
Cowl part interiors
ALUMINUM

G-HADV
NOTE
Great Britain ONLY
UNDERWING serial
Wing stripes are symmetrical, upper/lower left and right.
Apply decal stripes 19/25, align stripes, then trim to remove registration code. Apply codes 27/28 in place.
Fuselage stripes align at centerline of upper cowling
All aircraft are overall Gloss White, with Black propeller blades and Silver spinner. Apply fuselage stripe decals BEFORE installing stabilators 28/29. Apply large side stripes by
aligning stabilator mount cutout indicated on decal, then carefully wrap decals around fuselage contours and align as indicated. It is recommended to temporarily attach removable
upper cowl (Part 2) to fuselage before applying decals. Extra decals are provided for the advanced modeler to change registration numbers to personalize the model.
1
6(Left side)
7(Right side) 8(Left side)
9(Right side)
8(Left side)
9(Right side)
12(Left side)
13(Right side) 14(Left side) 15(Right side)
14(Left side)
15(Right side)
5
11
10
18
18
17
26
26
16
21(Left side)
22(Right side) 23(Left side)
24(Right side) 23(Left side) 24(Right side)
21(Left side)
22(Right side) 23(Left side)
24(Right side) 23(Left side) 24(Right side)
19 25
19 27 28
29(Upper Left/Lower Right)
30(Upper Right/Lower Left)
33(Upper Left/Lower Right)
34(Upper Right/Lower Left)
31(Upper Right/Lower Left)
32(Upper Left/Lower Right)
25
22
20 20
3 4
United States
Canada
Germany
Great Britain
Germany &
Great Britain
United States Canada

Your Minicraft model includes high-quality waterslide decals. These decals adhere best
to a glossy surface; and it is recommended that you apply a clear gloss coat over your
painted model.
Use a sharp scissors or knife to cut individual decals from the carrier sheet. Do not cut
into the clear film surrounding the individual decals.
* It is recommended that you apply one decal at a time.
* Place the decal section in warm water, when first inserted in the water your decal will
curl, after approximately ten seconds the decal will uncurl. Remove from water and lay
on a paper towel. After approximately 10 - 20 seconds the decal will slide freely from the
backing paper. Use a small brush to help slide the decal from the backing paper and into
position on the model. Carefully blot excess water from the decal, using care not to move
the decal or tear it.
* If you choose to use a setting solution, apply a thin coat over the decal following the
manufacturer’s instruction.
* Allow the decal to dry overnight. Wash any adhesive residue off the model with a small
amount of clean water and dry thoroughly.
* Apply clear gloss, matte or flat coat to seal decals following the instructions from the
manufacturer.
Visit our Website-
www.minicraftmodels.com
Minicraft Models (US) LLC
1501 Commerce Drive
Elgin, IL 60123
Phone: [phone]

 Look for our other Cessna aircraft:
  11634 - Cessna 172 Floatplane
  11635 - Cessna 172
  11663 - Cessna 150 Floatplane