Minka-Aire Alva F852L Guide

Alva
U.S. Patent Pending

©2017 Minka Lighting Inc.Manual design and all elements of manual design are protected by United States Federal and/or State Law including
Patents, Trademark, and/or Copyright Laws.

F852L

INSTALLING THE LIGHT KIT

8
9
0

MR153B TR110BL
wattage

9.
Blade holder(5 pcs)
Light kit assembly
Coupler cover
10.
0.5
11.
Receiver(include 6 wire nuts)
Hand held remote with 2 screws
1
2
3
4
7
8
9
10
6
5
11
12 13
Light shade(3 pcs)
Light bulb(3 pcs)
12.
13. D.
E.
F.
6
6
Blade bracket
hardward 1/4*
11mm+S screw
(11pcs)
M3 L wrench
8mm R wrench
(5 pcs)

Step 1: Assemble the blade with blade holders
with the provided blade attachment screws. (fig.5)
Step 2: Assemble the blade holder onto the fan
body. Pay attention to the side up. (fig.6&7)
Fig.5
ATTACHING THE FAN BLADE
Fig.6 Fig.7
Screw
Washer
Blade
Blade Holder
Blade
Holder
Blade
Blade
Screw

,and slip the coupler cover on to the fan body.
8
9
0
2
3
hanger

Fig.8 Fig.9 Fig.10 Fig.11 Fig.12 Fig.13
Hanger
ball
Canopy
Canpler
Cover
Coupler
Cover
Downrod
B clip
Clevis Pin
Fan Body
Fan Body
Coupler Cover
Downrod
Junction Box
Hanger Bracket
Washer
Star Washer
Spring Washer
Screw
Hanger
Bracket
Downrod

Fig.14
5
6

Fig.15 Fig.16
Motor to Receiver electrical connections: connect the WHITE
WIRE from the fan to the WHITE wire from receiver. Connect the RED wire
from the fan to the RED wire from the Receiver. Connector the BLUE wire
from the fan to the BLUE wire from the recelver. connect the PURPLE
wire from the fan to the PURPLE wire from the receiver. Connect the
GREY wire from the fan to the GREY wire from the receiver.
Step 4 Receiver to House Supply Wires Electrical connections: Connect
the WHITE wire from the outlet box to the WHITE wire from the receiver.
Connect the BLACK wire from the outlet box to the BLACK wire from the
receiver. Secure all wire connections with the plastic wire nuts provided.
4
Downrod
Hanger
Bracket
Black Wire
Grey
Red
Purple
White Wire
Green Wire
White Wire
Blue Wire

Fig.17 Fig.18 Fig.19
7
8
9
Hanger
Bracket
Screw
Receiver
Canopy
Screw Screw
Canopy
Canopy Cover
cover

INSTALLING THE LIGHT KIT
Step 1. Remove the hex screws from fan
body with the L wrench.(fig.20)
Step 2. Remove the 6 nuts from the light shade
assembly. (fig.21)
Step 3. Install the bulbs.(Fig.22)
Step 4. Re-assemble the light kit shade and tighten
the nut with the provided wrench. (Fig.23)
Step 5. Connect the wires between the fan and
light kit with the connectors. (Fig.24)
Step 6. Lift the light kit assembly onto the fan body
and tighten the 3 screws previously removed before.
Then adjust the socket to the suitable angle. (Fig.25)
Fig.20 Fig.21 Fig.22 Fig.23 Fig.24 Fig.25
Nut
Screw
Light Shade
Socket
Bulb
Nut
Screw
Light Shade
wattage

9

(COUNTERCLOCKWISE DIRECTION) (CLOCKWISE DIRECTION)
Fig.26 Fig.27
26
27