Minolta IC-205 User manual

4034-7183-01
91264C119H017
INSTALLATION MANUAL
IC-205
Applied Machine: / /
for Product Code 4034/4035
Image Controller
NOTE
•Before installing, be sure to unplug the power cord of the machine.
•Keep all packing materials out of the reach of children.
4034-7183-01E.fm 0 ページ ２００５年３月１日 火曜日 午後３時２６分

IC-205
– 1 –
■Unpacking
Check that the following accessories are available in the box.
■If this option is set up together with FK-505, EM-101/EM-102, NC-502,
and SU-502 as a system, carry out the installation procedures in the
following order.
NOTE
For the detailed installation procedures for each option, refer to the Installation
Manual provided for that particular option and make sure that the option is properly
set up according to the instructions given in that manual.
1. Image Controller Board ......................................................................... 1
2. User’s Guide* ........................................................................................ 1
3. CD-ROM* .............................................................................................. 1
4. Screw (3 × 6 mm) .................................................................................. 4
5. Installation Manual (this manual) ........................................................... 1
* Varies depending on the applicable marketing area
12
5
4980U021AA
4980U018AA
4508U003AA 4980U041AA
3
4690U010AA
4
EM-101/EM-102
NC-502 SU-502
IC-205
FK-505
4034-7183-01E.fm 1 ページ ２００５年３月１日 火曜日 午後３時２６分

IC-205
– 2 –
■Installing the Image Controller Board
1. Remove the Rear Cover. (nine screws)
4048U006AB
2. Connect the Image Controller Board to the
Control Board (PWB-C/C).
4508U004AA
3. Using the four screws furnished with the
Image Controller, secure the Image
Controller Board in position.
4508U005AA
4. Disconnect the hookup harness connector of
the Control Board (PWB-C/C).
4508U006AA
5. Connect the hookup harness connector,
which has been disconnected, to the
connector (P303) of the Image Controller
Board.
4508U007AA
P303
6. Reinstall the Rear Cover. (nine screws)
NOTE
Use the screw with washer to the position
indicated by the arrow.
4048U006AB
4034-7183-01E.fm 2 ページ ２００５年３月１日 火曜日 午後３時２６分