Mirrorstone MS-FYL5 User manual

MANUAL FOR WIFI 5 IN 1 LED STRIP
CONTROLLER
SKU: MS-FYL5
1. Features
With wireless functionality that can be easily controlled over WIFI or 4G via the MiBoxer app, this
controller offers up some of the most advanced PWM control technology in addition to memory
function, enabling you to easily customise your lighting setup to your exact liking quickly and
conveniently.
16 million colours to
choose from
Colour temperature
adjustable
Multiple brightness
levels
2.4G Wireless
transmission technology
WIFI wireless control
support long-range control
Timer settings, including
countdown
Remote control distance
of 30m
Smartphone app control
Third party voice app
control
Family sharing
Customisable lighting
scenes

2. Parameters
SET Button: To activate Smart Link mode, press and hold the SET button for 3 seconds. Once
the red indicator light starts to blink quickly, then reset the connected device to link the devices.
Switching Output Mode: Quickly press the SET button. The indicator light will flicker, which
means that the switch has been successful. Different colours flickering correspond to different
output modes.
White Light
Yellow Light
Red Light
Green Light
Blue Light
Single Colour
Mode
Dual White
Mode
RGB Mode
RGBW Mode
RGB + CCT
Mode
Indicator Light Instructions:
Your indicator light may be on, even without any input from you.
Here are what the lights indicate:
Red Light
Always On
Red Light
Blinking
Green Light
Always-on
Green Light
Blinking
Yellow Light
Blinking
Disconnected
FromNetwork
Smart LinkMode
Networking
Successful
Received Signal
Device
Malfunctioning

Controller Connecting To LED Strip Diagram
The following diagrams indicate how to wire your controller with your LED strips. Note that
controller input voltage must be in accordance with the required voltage of LED strips.

3. Signal Transmitting
One single light can transmit the signal received from your remote to another light within 30m.
As a result, as long as you have a light within 30m, the distance this remote control can cover is
theoretically limitless.
4. Modes Synchronisation
You can synchronise different lights even when they are started at different times. Just make
sure you’re using the same remote, and they’re within 30m of each other.

5. Linking/Unlinking Instructions
To link Your Light To
To Unlink Your Light From
If the light is not blinking slowly, then the linking has not been successful.
Please follow the above steps again. Please note, lights that have been linked
cannot be linked again.
If the light is not blinking quickly, the unlinking has not been successful.
Please follow the above steps again.

Compatible With These Remote Control (Sold Separately)
6. Instructional Videos
If you want to learn how to pair your controller with a smartphone app, or with a third-party
voice control system, you can scan these QR codes to watch an instructional video.

[email protected]
www.mirrorstonelighting.co.uk/
86 Scudamore Road Leicester, LE3 1UQ
[phone]
7. Attention
Please ensure that the voltage of your power supply is in accordance with the needs of the light,
otherwise the light will break. You should also check the connection of both the cathode and
the anode foe any faults before turning the light on.
Never connect wires while the power is on.
Only professional electricians should dismantle.
The working temperature of this unit is between -20~60°C. DO not expose the device to direct
sunlight, moistness and other environmental factors.
Do not use the light in a location with strong electromagnetic waves nearby, or else the remote
distance will be seriously affected.
1.
2.
3.
4.
5.