Mitsubishi Outlander PHEV 2019 User guide

2019 Owner’s Handbook
*This is a European version of the Outlander PHEV

PLEASE PLACE COPIES OF THE FOLLOWING ITEMS IN THIS BOOKLET:
1. Pre-Delivery Inspection Form (Customer Copy)
2. Triple Diamond Delivery Checklist (Customer Copy)
3. Salesperson or Key Dealership Contact’s Business Card

1
Thank you for buying a Mitsubishi Outlander PHEV. There’s no doubt you’ve already realized
how well your car drives on the open road. What you may not know is all the great features
that help your car perform the way it does. In the pages ahead we’re going to run through the
basics and prepare you for the road.
We hope you will visit the Mitsubishi Owner’s site where we store the latest Mitsubishi news
and special offers. Here you can also keep track of your car’s warranty and servicing needs,
get Roadside Assistance Information and tap into other owner-centric details. Just log on to
HTTPS://WWW.MITSUBISHICARS.COM/OWNERS.
Some of the information contained in this booklet may not be correct due to product changes which may
have occurred after the time it was published. Mitsubishi Motors North America, Inc. reserves the right to
make changes at any time, without notice, to prices, color, materials, specification and models.
TABLE OF CONTENTS
Driver's Door ................ Page 4
Steering Wheel Controls ....... Page 5
Steering Column Controls ...... Page 7
Instrument Cluster ........... Page 9
Instrument Panel ........... Page 10
Floor Console & Panel ........ Page 13
Windshield & Roof Console.... Page 18
The Second Row Seats ....... Page 19
Charging and
Charging Modes ............ Page 20
Setting Up the Remote Control .. Page 22
Emergency Roadside
Assistance App ............. Page 23
FAQ’s ..................... Page 24

32
DRIVER'S VIEW
1ECO Mode Switch. . . . . . . . . . . . . . . Page 20
2Climate Controls ............... Page 14
3Headlights ..................... Page 8
4De-Icer Controls ............... Page 14
5Side Mirror Adjustment ........... Page 4
6Windshield Wiper Lever........... Page 7
7Cruise Control / Adaptive Cruise
Control (if equipped) ............. Page 6
8Drive Mode Selector ............ Page 14
9Paddle Shifters ................. Page 7
10 Lane Departure Warning (LDW) Switch
and Forward Collision Mitigation (FCM)
Switch (if equipped)............. Page 10
11 Power Switch.................. Page 11
12 HomeLink®.................... Page 18
13 Audio Remote Control Switch ...... Page 6
14 Smartphone Link
Display Audio (SDA) ............. Page 16
15 Bluetooth® Operations ........... Page 5
16 Seat Heater Switch ............. Page 11
17 Power Liftgate Main Switch ...... Page 11
18 Multi-Information Display (MID) .... Page 9
19 Power Lift Gate Switch .......... Page 11
*2018 Model Year Shown
10
13
18
14
17
15
5
3 6
1
9
7
2
4
8
16
12
11
19

4DRIVER'S DOOR
KEYLESS ENTRY SYSTEM
1. LOCK ( ) button
2. UNLOCK ( ) button
3. Power liftgate button
(if equipped)
4. PANIC button
5. Operation indicator light
6. Charging Timer Cancel switch
(if equipped)
F.A.S.T.-KEY
While carrying the F.A.S.T.-KEY, press the driver’s door lock/
unlock switch A.
IF THE F.A.S.T.-KEY IS NOT OPERATING PROPERLY
Remove the key from the F.A.S.T.-KEY remote and unlock the
door manually. Then, insert the F.A.S.T.-KEY into the key slot
in the floor console. Starting the engine and changing the
operation mode should now be possible. Remove the
F.A.S.T.-KEY from the key slot after starting the engine or
changing the operation mode.
A
SIDE MIRROR ADJUSTMENT
The outside rearview mirrors can
be adjusted when the ignition
switch is in the “ON” or “ACC”
position or the operation mode is
put in ON or ACC.
Move the lever Ato the same
side as the mirror you wish to
adjust.
A
POWER FOLDING SIDE MIRROR SWITCH
Press switch to fold in mirrors (if
needed) within 30 seconds of the
ignition switch being in the "OFF"
position or the operation mode is
put in ON or ACC.
FOLDING SIDE MIRRORS
The mirrors will automatically
fold in when the vehicle is
turned off and the vehicle is
placed in Park under the following
two conditions:
1. The F.A.S.T.-KEY button located on the door
handle is pressed to lock the doors.
2. The Lock button on the remote control
is pressed.

5
STEERING WHEEL CONTROLS
There are 3 ways to make a call: by saying a telephone number,
by using the Bluetooth 2.0 interface's phonebook, and by
redialing a telephone number.
Press the SPEECH button. Say "Redial." The last phone number
dialed from the system will be redialed.
TO MAKE A CALL
REDIALING
BLUETOOTH®CONTROLS
For a list of compatible Bluetooth®devices, please go to
http://www.mitsubishicars.com/owners
A- SPEECH BUTTON
Change to voice recognition
B- PICK-UP BUTTON
Answer an incoming call
C- HANG-UP BUTTON
End a call or voice recognition
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
1. Press the HOME key
2. Touch SETTINGS, then scroll using « or » to the Bluetooth
Settings tab
3. On the Bluetooth Settings Screen, touch PAIR DEVICE
4. Activate the Bluetooth function on your device, then press Next.
5. Select "Mitsubishi Motors Bluetooth" on your device and
confirm request
NOTE: If a passkey is required, enter the passkey displayed on
the screen
6. Registration is complete when the Bluetooth settings screen
is displayed.
1. Press the Speech button.
2. Say "Dial."
3. After the voice guide says "Number please," say the
telephone number.
4. The voice guide will say "Dialing <number recognized>." The
Bluetooth 2.0 interface will then make the call. When the
confirmation function is on, the system will confirm the
telephone number again. To continue with that number,
answer "Yes." To change the telephone number, answer "No."
The system will say "Number please." then say the telephone
number again.
1. Press the SPEECH button.
2. Say "Call" (Note: You must have names stored in the
Phonebook or the voice guide will say "The vehicle phonebook
is empty. Would you like to add a new entry now?")
3. After the voice guide says, "Name please." Say the name
you want to call from those registered in the Phonebook. If
there is only 1 match, the system voice guide will say "Calling
<name>" and will dial the telephone number. If there are 2 or
more matches, the voice guide will say "More than one match
was found, would you like to call <repeats name> ." If that
person is the one you want to call, answer "Yes." If it is not the
person, answer "No." The name of the next matching person
will be mentioned by the voice guide.
BLUETOOTH®PAIRING
SAYING A TELEPHONE NUMBER
MAKING A CALL USING A PHONEBOOK NUMBER
A
B
C

6STEERING WHEEL CONTROLS
SEEK
Change station or track
SOURCE
Change the audio source
VOLUME UP/DOWN
AUDIO REMOTE CONTROL SWITCH
A- CANCEL: Used to deactivate the set
speed driving.
B- RES + : Used to increase the set speed
and to return to the original set speed.
C- SET – : Used to reduce the set speed
and to set the desired speed.
D- ON/OFF: Used to turn on and off the
cruise control.
E- ACC DISTANCE SWITCH: Used to set
or change the following distance
between your vehicle and the vehicle
in front of you.
CRUISE CONTROL / ADAPTIVE CRUISE CONTROL (IF EQUIPPED)
B
C
D
E
A
TO SET A CRUISING SPEED
1. Press Dand the “ACC” (if equipped) or “CRUISE” indicators will
appear in the Multi-information Display.
2. Accelerate or decelerate to your desired speed (above 25 mph).
Press Cand remove your foot from the accelerator pedal.
TO ACCELERATE OR DECELERATE SPEED
1. Push up Bto increase set cruising speed.
2. Push down Cto decrease set cruising speed.
TO CANCEL THE CRUISING SPEED
1. Press Aor press the brake pedal, or press D.
Press the rectangular icon next to the "Source" button on
the steering wheel to engage the camera at speeds up to 5
MPH. The camera will automatically engage when the vehicle
is shifted into reverse. Cameras placed at four positions
around the vehicle provide visibility that would normally not be
seen. The Audio Display will show two images of the vehicle's
immediate surroundings.
MULTI-VIEW CAMERA (IF EQUIPPED)

7
STEERING COLUMN CONTROLS
B
REAR WINDOW WIPER AND WASHER
Turn the knob
B
to operate the rear
window wiper.
INT The wiper operates continuously
for several seconds then operates
intermittently at intervals of about
8 seconds.
OFF
Washer fluid is sprayed, the wiper will
automatically operate 2 or 3 times.
WINDSHIELD WIPERS
AMIST The wipers will operate once.
OFF INT: Intermittent intervals can be adjusted
by turning the knob A.
AUTO: The wipers will be operated
automatically by rain sensor (if equipped).
INT or
AUTO
LO Slow
HI Fast
PADDLE SHIFTERS AND BRAKE REGENERATION
By pressing the paddle shifter up on the right side
you have reduced brake regeneration and increase
coasting. By pressing up on the left side, you increase
brake regeneration.
You can return to the “D” operation by pulling the
+ (SHIFT UP) side paddle shifter rearwards (toward the
driver) and holding for over 2 seconds.

8STEERING COLUMN CONTROLS
REGULAR HEADLIGHTS AUTOMATIC HEADLIGHTS
Headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license
plate and instrument panel lights on.
AUTO Headlights and other lights turn on and off automatically
in accordance with outside light level.
OFF All lights off.
Press the button on the end of the left stock while turning on the head lamp to turn on the Auto High Beam (AHB) operation. When an
oncoming vehicle or/and preceding vehicle approaches, AHB switches high-beam to low-beam until that vehicle is clear of the vehicle’s
detection area and switches back to high-beam once the detection area is clear.
AUTOMATIC HIGH BEAM HEADLIGHTS (AHB) (IF EQUIPPED)

9
INSTRUMENT CLUSTER
MULTI-INFORMATION DISPLAY SWITCH
OLD FUEL INDICATOR LIGHT
TIRE PRESSURE MONITORING SYSTEM (TPMS)
Use the 'Multi-Information Display switch' to change the
Multi-Information Display in the center of the instrument
cluster. A 'beep' will sound when button is pressed and the
display will change to show various information, including
warnings, service reminder, average fuel consumption, EV
cruising range, and energy flow.
The Tire Pressure Monitoring System
light illuminates when one or more of
your tires is significantly under inflated.
Please note that changes in the outside
temperature may decrease tire pressure
causing the TPMS light to turn on. If the
TPMS light remains illuminated, check
your tire pressure. If the warning light
illuminates, take the necessary measures
referring to the owner’s manual.
If the vehicle is not refueled with more
than 4 gallons at least once every three
months, the engine will automatically
start, while the ready indicator is
illuminated, to help prevent deterioration
of the fuel. At that time, charging of the
main drive lithium-ion battery will start
and the battery charge mode display will
appear on the information screen in the
Multi-information display. The charging will stop, however, before
the main drive lithium-ion battery is fully charged.
The engine may also start even while the EV drive mode is selected
or the vehicle is stationary.

10 INSTRUMENT PANEL
Due to the sealed fuel tank, pressure may build within the
tank in high altitudes, high temperatures, or if it has not been
used in some time. After pressing the fuel release switch, the
fuel tank will automatically reduce pressure as needed before
opening the tank. This may take a couple of seconds or up to a
minute, and a message will display.
FUEL TANK FILLER DOOR OPENER SWITCH
PLEASE WAIT
NOW OPENING
You can deactivate the system by pressing
down the “ASC OFF” switch for 3 seconds
or longer. When the ASC is deactivated, the
display/indicator will turn on.
To reactivate the ASC, momentarily press
the “ASC OFF” switch; the display/indicator is
turned off.
When you press the LDW switch located on
the left side of the steering column, the “LDW”
indicator on the information screen of the
Multi-information Display turns OFF and the
LDW system is inactive.
Press the switch again, the system
will activate.
Every time the operation mode is turned to
“ON”, the FCM will automatically be turned on.
To turn off the FCM, press and hold the FCM
switch located on the left side of the steering
column. The “FCM OFF” message and indicator
will appear in the Multi-information Display.
To change the warning distance mode, briefly
press the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid
only and is not a substitute for safe and careful driving. Under
certain circumstances, the system may not detect other
vehicles and/or pedestrians correctly.
ACTIVE STABILITY CONTROL (ASC) OFF SWITCHLANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED)
FORWARD COLLISION MITIGATION (FCM) SWITCH
(IF EQUIPPED)

11
INSTRUMENT PANEL
POWER SWITCH
While carrying the FAST-key within the
operating range, the POWER switch can be
used to start the drive battery.
TO START THE HYBRID EV SYSTEM:
1. Make sure that charging cable
is disconnected
2. Push POWER switch while pressing firmly on
the brake pedal
3. Once the READY light illuminates, the vehicle is ready for
operation
4. System will not be activated if the Select Lever is operated
while the "READY" light is flashing
TO STOP HYBRID EV SYSTEM:
1. Park vehicle in safe place
2. Push the Electric Parking Brake switch
3. Push the Push Button Park switch
4. Push the POWER switch
EMERGENCY ENGINE STOP PROCEDURES:
If you have to bring the engine to an emergency stop while
driving, press and hold the POWER SWITCH for 3 seconds or more,
or press it quickly 3 times or more.
STEERING WHEEL WARMER SWITCH (IF EQUIPPED)
The warmer will be activated by pressing the
Steering Wheel Warmer switch. To turn off
Steering Wheel Warmer, press the switch
again. Warmer will automatically turn off after
30 minutes.
When the power liftgate main switch (located in
the lower center dash area) is ACTIVE, the power
liftgate can be operated using either the power
liftgate switch on the FAST-key, the driver’s
side power liftgate switch or the open/close
switches on the power liftgate.
The power liftgate can be opened by pressing
the Power Liftgate switch.
Please note that you will need to have ALL the
doors unlocked for the unit to work properly.
If only the driver’s door is unlocked, the power
liftgate button will not work.
POWER LIFTGATE MAIN SWITCH
POWER LIFTGATE SWITCH
HEATED SEAT SWITCH
POSITION ACTION
HI For quick heating
NEUTRAL Heater off
LO Keeps seat warm

12 INSTRUMENT PANEL
The Blind Spot Warning (BSW) is a driving aid system that alerts
the driver when another vehicle which may not be visible through
the outside rearview mirror is traveling in the next lane behind
your vehicle. When a vehicle in the next lane is traveling at same
speed or faster in the detection areas, the Blind Spot Warning
light in the corresponding outside rearview mirror will illuminate.
If the turn signal lever is operated to the side where the Blind
Spot Warning light is illuminated, the Blind Spot Warning light will
blink and a buzzer will sound to alert the driver.
Depending on the relative speed between your vehicle and a
vehicle in the next lane, the Blind Spot Warning will detect up to
approximately 230 feet from your vehicle.
BLIND SPOT WARNING WITH LANE CHANGE ASSIST (BSW)
The Rear Cross Traffic Alert (RCTA) is an aid system for backing
up. When the RCTA detects vehicles approaching from sides while
your vehicle is reversing, the Blind Spot Warning lights in the
outside rearview mirrors on both sides will blink and a buzzer will
sound to alert the driver. A warning message will also appear on
the information screen of the Multi-information Display.
Rear Cross Traffic Alert will be activated from 0 MPH when the
vehicle is shifted into Reverse and will detect on-coming vehicles
that are passing behind you. (Note: Minimum speed required
for passing vehicles. See Owner’s Manual for details). Rear radar
transceivers will detect on-coming rear traffic and will light up in
the mirror and in the Multi-information Display as well as sound a
warning alert.
REAR CROSS TRAFFIC ALERT (RCTA)
The Blind Spot Warning, Lane Change Assist and Rear Cross Traffic Alert systems are
driver aids only and are not substitutes for safe and careful driving. Under certain
circumstances, these systems may not detect other vehicles correctly.

13
FLOOR CONSOLE & PANEL
SHIFT LEVER AND CONSOLE DESIGN
Pressing the PARK switch Awith your foot on the
brake will place the vehicle in Park.
To change S-AWC mode, press the TWIN MOTOR 4WD
LOCK B. This will put the vehicle into NORMAL or AWD
LOCK mode. Either mode can be driven on any surface
at any speed.
Pressing the Charge switch C, engages the engine
which in turn, will charge the battery.
The PHEV has a unique shift pattern Dthat includes
Brake Regeneration. Moving the shifter to the right
(B - Mode) and pressing down can move brake
regeneration to either regeneration level 3 or 5.
Pressing the SAVE switch Ewill preserve the
battery charge by periodically engaging the engine
as needed.
Pressing the EV Priority MODE switch Fhelps to
keep the vehicle in the electric mode. See the Owner's
Manual for instances where it will not stay in the
EV mode.
The Electric Parking Brake Gcan be engaged by
lifting the Parking button and disengaged by pressing
the parking switch. The Auto Hold switch Hwill
help to keep the vehicle in a stopped position when
coming to a stop. The brake will release when the
accelerator is pressed.
A- Push Button Park (behind lever)
B- Twin Motor 4WD Lock
C- Battery Charge Switch
D- Transmission Selector with Brake
Regeneration Selectt
E- Battery Save Switch
F- EV Priority Mode
G- Electric Parking Brake
H- Auto Hold Switch
A
B
C D E
F
G
H

14 FLOOR CONSOLE & PANEL
DRIVE MODE SELECTOR
The drive mode can be switched by
pressing the drive mode selector while
the Power switch is in the ON position.
Pressing the switch will change the
drive mode from NORMAL to 4WD LOCK.
1500W OUTLET (IF EQUIPPED)
Plug in any appliance that uses AC power
such as lights, an electric coffee maker, a cell
phone charger, etc. Maximum 1500W available
combined for both outlets.
DUAL-ZONE AUTOMATIC CLIMATE CONTROLS
A- Push to select the desired temperature
B- Push to select outside air (Indicator light off) or recirculated
air (Indicator light on)
C- Push for air conditioning ON/OFF
D- Push to select the blower speed
E- Push to select the position of air flowing from the vents
F- Push to defog windshield
G- When the AUTO switch is pushed, the settings are
automatically controlled. Passenger’s side temperature will
be changed to the same temperature set as the driver’s side
H- Push to defrost the rear windows and to activate the
De-Icer Controls
A
C
FB G
D E
H
A

15
A- Power and Volume Knob
B- Touch Screen Display
C- Home (return to initial display)
RADIO
Make sure you are on the Home Screen and touch either FM or
the AM button.
1.Once the station you want to save is shown on the screen, touch
and hold the preset boxes, numbered 1 through 6, on the touch
screen until you hear a beep.
2.Once you hear a beep, the station will be saved to memory.
The clock adjustment procedure is as follows:
1.Touch the HOME key
2.Touch SETTING, then CLOCK
The display changes to the clock setting where time and format
can be adjusted.
3.Touch SET
4.To return to the settings, touch BACK
5.The time setting change is completed
ACCESSING AM OR FM STATIONS
TO SET A STATION IN MEMORY
SETTING THE CLOCK
USB INPUT
1.Park your vehicle in a safe place
and press the Power switch off.
2.Plug in the USB connecting cable
that is supplied with your device
and connect the USB end into the
input terminal located in the floor
console box.
3.Press the Power switch to ON or
to the "ACC" mode. Turn on the
audio system.
4.Touch AUDIO to switch to the USB mode.
5.Depending on your USB device, it may take longer for playback
to start.
6.Once the device is selected, playback starts.
D- Apps
E- Audio
F- Menu
E
C
B
F
A
D
FLOOR CONSOLE & PANEL

16 FLOOR CONSOLE & PANEL
SMARTPHONE LINK DISPLAY AUDIO (SDA) SDA ENERGY INFORMATION DISPLAY
A- Vehicle Info
Changes SDA Energy Information Display
B- Timed Air Conditioning
Set timer for AC, Heat, or Defroster
C- Timed Charging
Set specific charging times for potential rate savings
D- Charging Cost
Enter cost of charge to review spending
See Owner's Manual for additional details and operation.
Displays real-time Drive Mode (EV, Series, Parallel), EV Range and
Total Range
Displays drive range, total range and AC power consumption
Displays amount of EV driving, ECO score, remaining range, and
EV & Fuel averages
A B C D

17
FLOOR CONSOLE & PANEL
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., registered in the U.S. and other Countries. Android, Android Auto, Google Play and
other marks are trademarks of Google Inc.
1.Make sure your iPhone®has iOS7.1 or later and that you are using a genuine Apple Lightning®to USB
cable.
2.Connect the Apple Lightning®to USB cable to your phone and to the vehicle's USB port in the center
console
3.Apple CarPlay will automatically connect. To use the iPhone with Apple CarPlay even while locked,
choose "Allow" on your iPhone's screen after the first connection.
4. You can now operate Siri by pressing and holding the Steering Wheel Audio Speech button until
prompted on the screen.
ACCESSING APPLE CARPLAY™
1.You must download the Android Auto app from the Google Play Store. This process may take up to a
couple of minutes.
2.Connect the manufacturer's phone cable from your phone into the vehicle's USB port located in the
center console.
3.Follow your phone’s on-screen instructions until you are connected to Android Auto. You can press
the Speech button on the Steering Wheel Audio Controls to activate voice operation.
ACCESSING ANDROID AUTO™
1.To select the HD Radio Sub-Channels, touch the display audio HD Radio Sub-Channel selection
(example 1, 2, 3, 4 shown).
2.The HD Radio Sub-Channel numbers will appear in a drop down menu. Select the designated HD
Sub-Channel.
HD RADIO SUB-CHANNELS
MY2018 model shown
MY2018 model shown

18 WINDSHIELD & ROOF CONSOLE
PROGRAMMING A NEW HOMELINK®
To program HomeLink®to operate a garage door, gate, or entry door opener, home or office lighting,
you need to be at the same location as the device.
1. Press the HomeLink®button that you would like to program. The indicator light (A) will flash
orange slowly.
2. Position the end of your hand-held transmitter (B) 1 to 3 inches away from the HomeLink®button
while keeping the indicator light in view.
3. Press and hold the hand-held transmitter button while watching the indicator light (A). Continue
pressing the button until the indicator light (A) changes from slowly flashing orange to either
rapidly flashing green (rolling code) or continuously lit green (fixed code). Now you may release the
hand-held transmitter button.
4. Press the just-trained HomeLink®button and observe the
indicator light.
• If the indicator light stays on constantly green, programming is complete and your device
should operate when the HomeLink®button is pressed and released.
• If the indicator light rapidly flashes green, firmly press, hold for 2 seconds and release the
programmed HomeLink®button. Repeat the “press/hold/release” sequence a second time, and,
depending on the brand of the garage door opener (or other rolling code equipped device),
repeat this sequence a third time to complete the programming process. At this point if your
device operates, programming is complete.
• If the device does not operate, continue with “Programming a new HomeLink®” steps 5 to 7 to
complete the programming of a rolling code equipped device.
5. At the garage door opener receiver (motor-head unit) in the garage, locate the “Learn” or “Smart”
button. This can usually be found where the hanging antenna wire is attached to the motor-head
unit (see the garage door opener manual to identify the “Learn” button.
6. Firmly press and release the “Learn” or “Smart” button. (The name and color of the button may vary
by manufacturer.) There are typically 30 seconds to initiate step 7.
7. Return to the vehicle and firmly press, hold for 2 seconds and release the programmed HomeLink®
button. Repeat the “press/hold/release” sequence a second time, and, depending on the brand of
the garage door opener (or other rolling code equipped device), repeat this sequence a third time
to complete the programming process. HomeLink®should now activate your rolling code
equipped device.
NOTE: Some hand-held transmitters may actually train better at a distance of 6 to 12 inches. Keep this
in mind if you have difficulty with the programming process.
1 - HomeLink®button 1
2 - HomeLink®button 2
3 - HomeLink®button 3

19
1.When folding the left side second row seat, store the seat
belt for the middle seating position of the second row
seat. Refer to “Detachable center seat belt for second row”
in your Owner’s Manual for help.
2.Lower the head restraint for
second row middle seating
position to its lowest position.
3.Pull the strap (A) and tilt
forward the head restraints
for second row outside
seating position.
4.Pull the strap (B) to flip the seat
cushion forward.
5.Fold forward the seat belt buckle.
6.Pull up the
lever (D),
then fold
the seatback
forward.
1. Raise the seatback until it locks securely
into place.
2. While lifting the seat belt buckle (A),
gently lower the seat cushion. Make sure
that there
is a hook (B) at the position shown in
the illustration.
3. Push down the seat cushion until it locks
securely into place.
4. Make sure that all seat belt buckles are
properly positioned on the seat cushion.
5. If the center seat belt is stored:
• Pull out the detachable anchor plate
(D) from the seatback.
• Pull the small latch plate (E) slowly and
insert it into the detachable anchor
plate until a click is heard.
• Make sure that the seat belt is not
twisted.
UNFOLDING THE SECOND ROW SEATSFOLDING THE SECOND ROW SEATS
CAUTION: Do not allow any person to sit on the flipped seat
cushion, and do not place luggage on it. The seat’s mounting
fittings could bend under the weight, making it impossible
for the seat cushion to be secured when it returns to the
original position.
THE SECOND ROW SEATS