Mixx Audio ChargeSpot User manual

QUICK START GUIDE

CHECK
ChargeSpot with attached 1.5m USB charging cable.
ChargeSpot

Wireless charging
surface
1.5m USB charging
cable
LED Indicator Light
Connect your ChargeSpot to your mobile phone wall
charger using the 1.5m USB charging cable. Once
connected, the LED Indicator Light will shine BLUE.
LET’S START
LET’S POWER
1
2
3
3
ChargeSpot

Place your Qi-enabled smartphone at on top of the
Wireless Charging Surface of your ChargeSpot.
When positioned correctly, the LED Indicator Light will
turn GREEN and the smartphone will begin to charge.
When the phone is taken o your ChargeSpot,
the ChargeSpot will enter standby mode and the
LED Indicator Light will change back to BLUE.
A BLUE ashing LED Indicator Light means either:
1. Smartphone is not on the ChargeSpot correctly or
2. The ChargeSpot is too hot
LET’S CHARGE
3
3
3
2
ChargeSpot

Operate your ChargeSpot as normal but ensure that
the power adapter you are using is compatible with
Fast Charge Technology.
Your ChargeSpot will intelligently detect whether or
not your phone supports Fast Charging and supply it
with the necessary power.
For best results use a 9V 1.8A / QC2 / QC3
power adapter.
LET’S FAST CHARGE
ChargeSpot

Do not disassemble, expose to water, or intense heat.
Do not place in close proximity to strong magnetic
elds or strips such as, ID cards, bank cards etc.
Keep at least 20cm away from implanted medical
devices (such as pacemakers and cochlear implants)
to prevent potential magnetic interference.
Please keep away from children and pets.
Do not continue to use your ChargeSpot if damaged.
LET’S BE SAFE
ChargeSpot

This product can be recycled.
Products bearing this symbol must NOT be
thrown away with normal household waste.
Take the product to a collection point designated for
recycling of electronic devices.
Find out more about return and collection points
through your local authority.
LET’S RECYCLE
ChargeSpot

For technical support or to download this user guide
visit www.mixxcharge.com
MWCS-QSG01