MK Diamond Products MK-2000 PRO Series User manual

www.mkdiamond.com MK-2000 GAS SERIES
MASONRY SAW
OWNER’S MANUAL,
OPERATING INSTRUCTION &
PARTS LIST
05.2014
Revision 200
Manual Part No. 158320
Caution: Read all safety and operating instructions
before using this equipment. This owner’s manual MUST
accompany the equipment at all times.
MK-2005H PART # 155961
MK-2006R PART # 159885
MK-2006V PART # 169947
MK-2007K PART # 167999

46
MK-2000 GAS SAW EXPLODED VIEW
19
1
2
3
4
9
10
11
13
14
15
16
17
20
21
23
4
4
4
22
5
6
7
8
12
MK-2000 Saw Assembly Part # 155961

47
MK-2000 GAS SAW PART LISTS
ITEM DESCRIPTION PART # QTY.
1WASHER, FLAT, USS, 3/8 101360 1
2WRENCH, 3/4 BOX END 134056 1
3COLLAR, 1.13 ODX 625ID .5 WIDE 140012 2
4WASHER, FLAT, SAE, 3/8 150923 7
5SCREW, PAN HD, #10-24X3/8 151097 2
6NUT, HEX, 10-24 151749 2
7HOSE, VINYL, 1/4X3/8 (32.0’) 152410 1
8CLAMP, SPRING 152453 1
9SCREW, HEX HD CAP, 3/8-16 152505 1
10 SCREW, HEX HD 3/8-16 X 1 152507 1
11 SCREW, 3/8-16 X 2-1/4 HEX HEAD 153529 1
12 CLAMP, HOSE, 7/8 154173 2
13 LABEL, MK BRICKSAW 12-1/2X1-3/4 155230 2
14 KNOB, TRI PLASTIC, 1” 156770-01 1
15 TAG, SERIAL NUMBER, BLANK 157500-RW 1
16 SCREW, DRIVE, RND HD, #7X5/16 157849 2
17 SCREW, SHOULDER 3/8 X 1/2 160078 1
18 MASONRY LABEL SHEET (NOT SHOWN) 166011 1
19 BLADE, CG, 14X125X1 10MM 166308 1
20 BAR, BLADE GUARD ADJ. 166602 1
21 BRACKET, HEIGHT ADJUSTMENT 166868 1
22 ASSY, CUTTING HEAD, 5.5 HP HONDA, 14” 170817 1
23 ASSY, FRAME, 2000 170818 1
MK-2000 Saw Assembly Part # 155961

48
1
2
4
7
9
10
13
17
18
19
20
21
7
17
8
11
27
3
12
22
8
6
16
25
14
15
26
5
5
23
24
MK-2000 Cutting Head, 5.5 HP Honda Part # 170817
MK-2000 GAS SAW EXPLODED VIEW

49
MK-2000 Cutting Head, 5.5 HP Honda Part # 170817
ITEM DESCRIPTION PART # QTY.
1HANDLE, BRICKSAW 139931 1
2STUD, BLD GUARD 150581 1
3STRAP, MOTOR ADJ 150584 1
4WASH, FLAT, SAE, 3/8 150923 1
5WASHER, FENDER, 5/16 X 1.0 151053 5
6BOLT, HEX HD TAP, 5/16-18X2-1/2 151748 4
7WASHER, FLAT, SAE, 5/16 151754 5
8WASHER, FLAT, SAE, 1/4 151915 3
9SCREW, HEX HD, 1/4-20X3/4 152370 2
10 SCREW, HEX HD CAP, 3/8-16 X 1 152507 2
11 WASHER, LOCK, SPLIT, 1/4 152591 2
12 SCREW, 1/4-20 X 1/2 HEX HEAD 152608 1
13 BOLT, 3/8-16 X 4 HEX HEAD TAP 152678 1
14 FITTING, 1/4 MNPT X 1/2 BARB 152704 1
15 ELBOW, 1/4 NPT X 45 STREET 153869 1
16 NUT, HEX, TW, 1/4-20 153941 2
17 NUT, HEX, TW, 5/16-18 153942 5
18 NUT, 1/2-13 HEX 153943 1
19 ASSY, ARBOR, MK-2000 154636 1
20 GRIP, HANDLE 7/8 ID 158608 1
21 SPRING, TORSION, 50 DEG 160071 1
22 GUARD, SPLASH 160310 1
23 SCREW, 5/16-18 X 1-3/4 HEX HEAD MACHINE 160948 1
24 ASSY, MOTOR MOUNT, MK-200 160966 1
25 ASSY, ENGINE, 2000G 170819 1
26 VALVE, BALL 1/4”M X 1/4”F 231248 1
27 CASTING, 2000, BLD GRD-COMP 150579G 1
MK-2000 GAS SAW PART LISTS

50
ITEM DESCRIPTION PART # QTY.
1ASSY, CONVYR CART 133082 1
2SCREW, HEX HD, CAP, 5/16-18X1-3/4 150919 8
3SCREW, HEX HD, 3/8-16 X 1-3/4 150920 1
4WASHER, FLAT, SAE, 3/8 150923 1
5WASHER, LOCK, SPLIT, 3/8 150925 1
6SCREW, HEX HD, 5/16-18X1 151743 4
7WASHER, LOCK, SPLIT, 5/16 151747 13
8WASHER, FLAT, SAE, 5/16 151754 13
9NUT, HEX, 1/4-20 151893 1
10 WASHER, FLAT, SAE, 1/4 151915 2
11 SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE 152467 1
12 CLAMP, 1/2 CUSHION LOOP 152471 1
13 WASHER, LOCK, SPLIT, 1/4 152591 1
14 PLUG, RBBR DRAIN W/O HOLE 153439 1
15 NUT, WELD, SLAB. 3/8-16 153945 1
16 ROD, SPLASH CURTAIN 153956 1
17 SHAFT, PIVOT, 5/8 154147 1
18 SCREW, HEX HD 1/4-20 X 2 158282 1
19 WELDMENT, BASE FRAME 158845 1
20 POST (COMP) 158846 2
21 STUD, SPRING RETAINING 160066 1
22 BRACKET, STAY LEVEL CLIPPER PAV 160068 1
23 BRACKET, PIVOT SHAFT 160070 1
24 CURTAIN, SPLASH, MK-2000 160972 1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
7
8
Assy. Frame Part # 170818
MK-2000 GAS SAW EXPLODED VIEW

51
MK-2000 GAS SAW EXPLODED VIEW
1
2
3
4
5
8
9
10
11
12
13
14
16
17
18
19
20
6
7
2
3
3
3
6
6
7
7
10
14
14
14
17
SWITCH 157851
INCLUDED WITH ENGINE
Assy. Engine MK-2000G Part # 170819
ITEM DESCRIPTION PART # QTY.
1WASHER, FLAT, USS, 3/8 101360 1
2SCREW, HEX HD, 5/16-18X2-1/2 101675 4
3KEY, 3/16 SQ X 1-1/8 150344 4
4WASHER, FLAT, SAE, 3/8 150923 1
5WASHER, LOCK, SPLIT, 3/8 150925 2
6WASHER, LOCK, SPLIT, 5/16 151747 21
7WASHER, FLAT, SAE, 5/16 151754 17
8SCREW, HEX HD CAP, 3/8-16 X 1 152507 2
9PULLEY, 10J23 X 3/4 BORE 156292 2
10 BELT, 10J220 156294 2
11 BELT GUARD, ENGINE, INNER ARBOR (MACH) 156669 1
12 CASTING, BELT GUARD, OUTER, 2000G-RAW 156670 1
13 BELT GUARD, ENGINE, INNER (COMP) 156671 1
14 SCREW, 5/16-18 X 3/8 SOCKET HEAD SET 157084 8
15 WIRE HARNESS, BRICK SAW GAS 157414 1
16 GUARD, ENGINE, OUTER (COMP) 160063 1
17 PULLEY, 10J19 X .75 BORE 160950 2
18 ASSY, PUMP, WATER, 2005/6 GAS 161126 1
19 ASSY, ENGINE MOUNT, 2000G 170820 1
20 BRACKET, SWITCH (GAS) 231313 1

52
MK-2000 GAS SAW EXPLODED VIEW
1
2
3
4
5
6
7
8
9
10
11
12
13
14
16
17
18
1
2
4
5
7
13
1
4
8
14
17
15
Assy. Engine MK-2000G Part # 170819
ITEM DESCRIPTION PART # QTY.
1NUT, HEX, 5/16-18 101196 8
2WASHER, FENDER, 5/16 X 1.0 151053 4
3SCREW, HEX HD, 5/16-18X1 151743 4
4WASHER, LOCK, SPLIT, 5/16 151747 12
5WASHER, FLAT, SAE, 5/16 151754 8
6SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE 152467 4
7SCREW, 5/16-18 X 2 HEX HEAD 155494 4
8STAND OFF, SHOCK MOUNT 156104 4
9ENGING, HONDA GX160 W/CYC 156282 1
10 PLATE, ENGINE MNT LOWER 156296 1
11 PLATE, ENGINE MNT UPPER 156297 1
12 STRAP, BELT TENSION MK-2005 156955 1
13 PLATE, ENGINE MNT UPPER 156961 4
14 MOUNT, SHOCK LOWER 156962 4
15 ASSY, OIL DRAIN, 10MM 157577-01 1
16 SCREW, 5/16-18 X 1-3/4 HEX HEAD MACHINE 160948 1
17 MOUNT, SHOCK, WASHER 164244 4
18 ASSY, ENGINE MOUNT, 2000G 170820 1

53
MK-2000 GAS SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1BEARING, BLAD SHFT MK2000 139956 2
2SHAFT, JACK 156295 1
3MOUNT, ENGINE (COMP) 156673 1
1
2
3
SCALE 0.500
Motor Mount Part # 170820
Motor Mount Part # 160966
6.67±.06
1
2
3
4
5
6
7
8
9
ITEM DESCRIPTION PART # QTY.
1BEARING, CUTTING HD PIV 140004 2
2BAR, ADJUSTMENT 150585 1
3PIN, SLOTTED SPRING, 3/8 X 1-3/4 151358 1
4WASHER, LOCK, SPLIT, 5/16 151747 4
5SCREW, 5/16-18 X 1-1/2 HEX HEAD MACHINE 152467 4
6BUSHING, FLANGE, 1/2X5/8X1 156441 2
7HOUSING, PIVOT SHAFT 157979 1
8HEAD, CUTTING (COMP) 160346 1
9CLAMP, CUTTING HEAD (COMP) 160397 2

54
MK-2000 GAS SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1PUMP MOUNTING PLATE 156108 1
2SCREW, 5/16-18X1/2 SOCKET HEAD CAP 156139 2
3SCREW, 5/16-18 X 3/8 SOCKET HEAD SET 157084 2
4 O-RING 160175 2
5SHAFT, FLEX 40 3/4 160177 1
6ASSY, HOUSING, 38” FLEX SHAFT 160178 1
7ASSY, PUMP, CENTRIFUGAL WATER 160185 1
8ASSY, DRIVER 160186 1
9PULLEY, FLAT 3.0 DIA X 1.0 X 5/8 160431 1
(38.0)
12
3
5
SECTION A-A
14
Assy, Pump, Water, 2005/6 Part # 161126

55
MK-2000 GAS SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1FLANGE, OUTER 132290 1
2WASHER, FLAT, SAE, 3/8 150923 4
3WASHER, LOCK, SPLIT, 5/16 151747 4
4SCREW, HEX HD 1/2-20X1-1/4 152122 1
5SCREW, HEX, 5/16-18 X 2-1/4 153951 4
6BEARING, ARBOR HOUSING 154594 2
7CASTING, 2000/5000 ARBOR - COMP 154637 1
8SHAFT, BLADE 154639 1
9FLANGE, ARBOR, INNER 154640 1
1
4
6
7
8
9
Assy. Arbor Part # 154636

56
MK-2000 GAS SAW EXPLODED VIEW & PARTS LIST
ITEM DESCRIPTION PART # QTY.
1WHEEL, CONVEYOR CART 133090 4
2STOP, BACK-CONVEYOR CART 134387 1
3SCREW, PAN HD PHIL #8 X 1 151047 2
4SCREW, THUMB 5/16-18 X 1- 1/2 151155 1
5NUT, SQUARE 5/16 - 18 151156 1
6SCREW, 1/4 -20 X 3/4 HEX HEAD MACHINE 152370 4
7NUT, HEX W/WSHR, 1/4 - 20 153941 4
8NUT, HEX W/WSHR 5/16 - 18 153942 4
9TABLE, D.C., COMP 158144 1
10 WOOD STRIP, TABLE INSERT 158283 1
11 CASTING, SQUARING ARM - COMP 231276 1
Assy Table Part # 133082

57
ITEM NUMBER DESCRIPTION
1. 152792 Dressing Stick
2. 153331 Folding Saw Stand
3. 160617
MK-565SKMR
Supreme Masonry
Diamond Blade
MK-2000 GAS SAW ACCESSORIES

58
MK-2000 GAS SAW ORDERING & RETURN INSTRUCTIONS
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIzED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.

59
MK-2000 GAS SAW CONTACT & LIMITED WARRANTY
CONTACT
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2014, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

MK-2000 GAS SAW SERIES
OWNER’S MANUAL, OPERATING
INSTRUCTIONS & PARTS LIST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com