MK Diamond Products MK-770EXP User manual

MK-770EXP TILE SAW
OWNER'S MANUAL, PARTS LIST &
OPERATING INSTRUCTIONS
www.mkdiamond.com
05.2015
Caution: Read all safety and operating instructions
before using this equipment. This owners manual MUST
accompany the equipment at all times.
Revision 207
Manual Part No. 160434

50
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
29
30
31
32
33
34
35
MK-770EXP SAW EXPLODED VIEW
Frame Assembly Part # 160267

51
ITEM DESCRIPTION PART # QTY.
1WASHER, FLAT, USS, 3/8 101360 1
2HOSE, VINYL, 1/4X3/8 (6.0") 132951 1
3WRENCH, TILE SAW NUT 15/16 134684 1
4PAN, PLASTIC MK-101F 150634 1
5WASHER, LOCK, SPLIT, 3/8 150925 2
6PUMP, WATER 115V/60HZ UL/CSA 151271-VP 1
7SCREW, HEX HD, 5/16-18X1 151743 2
8WASHER, LOCK, SPLIT, 5/16 151747 2
9 WASHER, FLAT, SAE, 5/16 151754 2
10 SCREW, WING, 1/4-20X1/2 151888 1
11 WASHER, FLAT, SAE, 1/4 151915 1
12 WRENCH, TILESAW, 11/16 OPEN END 153450 1
13 CLAMP, HOSE, 1/4-1/2 FLOW 154394 1
14 PLATE, PRESSURE 155671 1
15 SCREW, 3/8-16 X 2-1/2 HEX HEAD CAP 156030 2
16 KNOB, TRI PLASTIC MK-770 2-1/4 156770-04 1
17 TAG, SERIAL NUMBER, BLANK 157500-RW 1
18 SCREW, SOC HD SET 1/4-20 X 1/4 157528 1
19 MK-HDTCM WET 7X060X7/8 CONT 157913 1
20 DRAIN PLUG, W/RING 159529 1
21 STRAP, 9" DRAIN PLUG 159530 1
22 RIP GUIDE, LARGE DIE CAST 159751 1
23 ASSY, CUTTING HEAD, 120V 160042 1
24 SCREW, SHOULDER, 5/16X1 160045 1
25 ASSY, TABLE, 770EXP 160265 1
26 PIN, PIVOT, 770EXP 160265 1
27 GUARD, SPLASH 160310 1
28 ASSY, CARTON MK-770EXP 160433 1
29 CASTING, POST, 770EXP DC-COM 160450 1
30 SPACER, 5/8 X .385 X 1.4 160654 2
31 PLUG, PLASTIC, 1 SQ-14-20-GA 160727-1 2
32 SCREW, QUICK DRIVE, #8-32X1/4 162850 2
33 SHEET, WARNING LABELS, TILE SAW 166012 1
34 FRAME, 10" TILE SAW, 18" RIP 168021 1
35 ADAPTER, 1/2 NPT X 1/4 BARB 168261 1
MK-770EXP SAW PARTS LIST
Frame Assembly Part # 160267

52
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
ITEM DESCRIPTION PART # QTY.
1FLANGE, OUTER, 2-3/8 135830 2
2NUT, HEX, 5/8-18 135848 1
3KNOB, DAVIES, 5/16-18 X 1 151681 2
4NUT, WING, NYLK, 5/16-18 151746 1
5WASHER, LOCK, SPLIT, 5/16 151747 1
6BOLT, HEX HD TAP, 5/16-18X2-1/2 151748 1
7NUT, HEX, 10-24 151749 2
8SCREW, FIL HD, SLT, #10-24X3/4 151750 1
9 SCREW, FIL HD, SLT, #10-24X1 151751 1
10 SCREW, SHOULDER, 1/2X1/2 151753 2
11 WASHER, FLAT, SAE, 5/16 151754 3
12 NUT, HEX, 1/4-20 151893 1
13 SCREW, SHOULDER, 5/16X5/8 152137 1
14 SCREW, HEX HD, 1/4-20X3/4 152370 1
15 ELBOW, 1/8 MNPT X 1/4 BARB 90DEG 154652 1
16 CASTING, BLD GRD, 7 INCH BLADE (COMP) 154811 1
17 MTR, ELECT, 7.4AMP 120V 156428-R 1
18 SCREW, FLAT HD 10-32 X 5/8" 157554 4
19 CASTING, COMMON PART, CTTG HD-C 159937 1
20 CASTING, MTR MOUNT, COMMON-COMP 159941 1
MK-770EXP SAW EXPLODED VIEW & PARTS LIST
Cutting Head Part # 160024

53
MK-770EXP SAW EXPLODED VIEW & PARTS LIST
1
2
3
4
5
6
7
8
9
5
ITEM DESCRIPTION PART # QTY.
1BAR, GUIDE PLATED MK-101 134759 1
2WASHER, LOCK, SPLIT, 5/16 151747 2
3WASHER, FLAT, SAE, 5/16 151754 2
4ASSY, WHEEL BRKT TSAW 151756 1
5SPACER, GUIDE BAR COVER, COMMON 152393 2
6SCREW, HEX HD, 5/16-18X1-1/4 153950 2
7COVER, GUIDE BAR, 120 DEG 158403 1
8CASTING, TABLE, 370/770EXP-COMP 159939 1
9 SPACER, 5/8 X 5/16 X 5/8 160264 2
Table Assembly Part # 160265

54
1
2
3
4
5
ITEM DESCRIPTION PART # QTY.
1WHEEL, ROLLER TSAW 151799 1
2NUT, HEX HEAD 1/4-20 X 1-1/2" 151893 1
3SCREW, HEX HEAD 1/4-20 X 1-1/2" 151914 1
4WASHER, FLAT, SAE, 1/4 151915 1
5BRACKET, ROLLER WHEEL 154021 1
MK-770EXP SAW EXPLODED VIEW & PARTS LIST
Roller Part # 151756

55
ITEM NUMBER DESCRIPTION
1. 139295 MK-200, 7 x 5/8 Arbor
2. 139311 MK-215, 7 x 5/8 Arbor
3. 153293 MK-315, 7 x 5/8 Arbor
5. 134577-MK Dual 45° Flat Angle Guide
6. 134569-MK 90° Protractor
7. 152792 Dressing Stone
8. 160488 Side Table
9. 151889 Folding Stand
MK-770EXP SAW ACCESSORIES

56
ORDERING INFORMATION
You may order MK Diamond products through your local MK Diamond distributor or, you may order
direct from MK Diamond.
When ordering direct from MK Diamond, please have the following information ready before calling:
• The Model Number of the saw
• The Serial Number of the saw
• Where the saw was purchased and when
• The Part Number for the part(s) being ordered
• The Part Description for the part(s) being ordered
NOTE: There is a $25.00 minimum order when ordering direct from MK Diamond. A $6.00 charge will
be added to orders having a net billing value under $50.00. All purchases must be made using VISA,
MasterCard or American Express.
All parts may be ordered by calling toll free to – 800 421-5830 or 310 539-5221 and asking for
Customer Service. For technical questions, call – 800 474-5594.
RETURN MATERIALS POLICY
To expedite the service relative to the return of a product purchased through MK Diamond, please
observe the following:
NOTE: When returning all items, they must have been purchased within the previous twelve (12)
months.
• Have the Model Number of the saw
• Have the Serial Number of the saw
• Have the location of where the saw was purchased
• Have the date when the saw was purchased
• Contact Customer Service for approval to return the item(s)
• Obtain a Returned Goods Number (RGA) authorizing the return
• Follow the packaging instructions in the following section
• Ensure your item(s) are prepaid to the destination
For returned items, call toll free to – 800 421-5830 or 310 539-5221 and ask for Customer Service.
For technical questions, call – 800 474-5594 or 310 257-2845.
PACKAGING INSTRUCTIONS
• Remove the Cutting Head and Support Angle Assembly
• Dry the saw before shipping
• When packing, include the following: Saw, Diamond Blade, Blade Guard and Support Angle
Assembly and Adjustable Cutting Guide (Other Accessories are not required)
• Package the unit in its original container or one of comparable size (do not ship the unit partially
exposed)
• Ensure all parts are secured in the packaging to prevent moving
AUTHORIzED SERVICE CENTERS
For quicker repair time, you may contact MK Diamond Customer Service, toll free, at 800 421-5830
or 310 539-5221 for the Authorized Service Center closest too you or visit our web site at
www.mkdiamond.com. For technical questions, call – 800 474-5594.
MK-770EXP SAW ORDERING & RETURN INSTRUCTIONS

57
MK-770EXP SAW CONTACT & WARRANTY
CONTACT
Please contact MK Diamond Products, Inc. Customer Service Department with any questions you
might have regarding distributors, parts or service.
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Customer Service Hours: Monday through Friday, 6AM-4PM PST
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
© COPYRIGHT 2014, MK DIAMOND PRODUCTS, INC. ALL RIGHTS RESERVED.
The MK Diamond logo is a registered trademark of MK Diamond Products, Inc. and may not be used,
reproduced, or altered without written permission. All other trademarks are the property of their re-
spective owners and used with permission.
MK Diamond may have patents, patent applications, trade marks, copyrights of other intellectual
property right covering this product in this document.
This manual MUST accompany the equipment at all times. This manual is considered a permanent
part of the equipment and should remain with the unit if resold.
The information and specications included in this publication were in effect at the time of approval for
printing.
MK DIAMOND PRODUCTS, INC. will guarantee every machine they build, to be free from defects in
material and workmanship for (1) one year from date of purchase. The obligation of MK DIAMOND
PRODUCTS, INC. under this warranty is limited to the repair or replacement of any parts which,
under normal use, prove to be defective in material or workmanship. The parts involved or the unit
in question should be returned to MK DIAMOND PRODUCTS, INC. or to a point designated by us,
transportation prepaid.
This warranty does not obligate us to bear the cost of labor or transportation charges in connection
with replacement or repair of defective parts. Likewise, it shall NOT apply to any unit which has been
subjected to misuse, neglect or accident. This warranty does NOT apply to any machine which has
been repaired or altered outside our factory.
This warranty does NOT obligate MK DIAMOND PRODUCTS, INC., with respect to items not of our
manufacture, such as engines, motors, hydraulics, etc., which are subject to their own guarantees and
warranties.
We shall in no event be liable for consequential damages or contingent liabilities arising out of failure
of any equipment or parts to operate properly.
MK DIAMOND PRODUCTS, INC. LIMITED WARRANTY

MK-770 EXP TILE SAW
OWNER'S MANUAL & OPERATING INSTRUCTIONS
MK Diamond Products, Inc.
1315 Storm Parkway
Torrance, CA 90501
Toll-Free: [phone]
Phone: [phone]
Fax: [phone]
www.mkdiamond.com