5
Answer a Call:
During the ring tone, press Accept Button (1) for 1 second to answer the call.
End a Call:
Press End/Reject Button (2) for 1 second to end the call.
Voice Dial:
Important: Be sure the voice dialling function of your phone is activated. Record at
least one voice tag. (Kindly refer to the procedure in your phone’s manual.)
Note: Voice dialling entries must be stored in the phone’s memory, not on the SIM
card!
1. Press the Accept Button (1) for 1 second.
2. A voice dial beep will be heard on the kit to prompt the user to say the voice
tag of the contact to call.
3. Say the voice tag exactly as how you recorded it.
4. The voice will be played back to you, and then the phone will dial the number
automatically.
Redial (For Handsfree Prole Phones only):
Press Accept Button (1) for 3 seconds. The last dialled number will be redialled.
Reject a Call (For Handsfree Prole Phones only):
During the ring tone, press End/Reject Button (2). The incoming call will be rejected.
Volume Setting:
Increase or decrease the volume by pressing the Volume Up (8) or Volume Down
(7) button. Press repeatedly until desired level is reached.
Audio Transfer (For Handsfree Prole Phones only):
During an ongoing call, you can transfer the audio.
Kit to Phone: Push in the Microphone Shaft (5) or turn off the kit. The audio will
be transferred to the phone.
Phone to Kit: Press-and-release the Microphone Shaft (5) or turn on the kit.
Note: Some phones do not connect automatically to the kit after turning on. With
these phones, you need to press Accept Button (1) for 1 second to transfer the
audio to the kit.
Advanced Functions
Multi-Pairing / Switching Connections Between Phones:
The SUPERTOOTH LIGHT can be paired to 5 Bluetooth phones. An additional
pairing will automatically delete the phone that has not been used for the longest
time. Thus, the SUPERTOOTH LIGHT always maintains 5 phones in its memory.
You can easily switch to any of the paired phones by:
