Answer a Call:
During the ring tone, press Accept Button (1) for 1 second to answer the call.
End a Call:
Press End/Re ect Button (2) for 1 second to end the call.
Voice Dial:
Important: Be sure the voice dialing function of our phone is activated. Record
at least one voi e tag. (Kindl refer to the procedure in our phone’s manual.)
Important: Voice dialing entries must be stored in the phone s memory, not on
the SIM card!
1. Press the Accept Button (1) for 1 second.
2. A voice dial beep will be heard on the kit to prompt the user to sa the
voice tag of the contact to call.
3. Sa the voice tag exactl as how ou recorded it.
4. The voice will be pla ed back to ou, and then the phone will dial the
number automaticall .
Note: Voice dial deactivation: Pressing Accept Button (1) for 1 second
activates voice dial but if ou want to deactivate it, just press the same button
again for 1 second. The voice dial will be deactivated immediatel .
Redial (For Handsfree Profile Phones only) :
Press Accept Button (1) for 3 seconds. The last dialed number will be redialed.
Re ect a Call (For Handsfree Profile Phones only) :
During the ring tone, press End/Re ect Button (2). The incoming call will be
rejected.
Volume Setting:
Increase or decrease the volume b pressing the Volume Up (8) or Volume
Down (7) button. Press repeatedl until desired level is reached.
Audio Transfer (For Handsfree Profile Phones only) :
During an ongoing call, ou can transfer the audio.
Kit to Phone: Press the Accept Button (1) for 3 seconds. The audio will be
transferred to the phone.
Phone to Kit: Press the Accept Button (1) for 1 second. The audio will be
transferred to kit.
