MOBILE DVR UBB-4.CQ User manual

INSTALLATION&OPERATIONINSTRUCTIONS
The ultimatein video recording technology,the UBB-4.CQMobile DVRsystemprovidesaround-
the-clockvideo surveillancerecording foryourvehicle.Theserecordingsmaybe used in court
toshowproofofanyeventthattookplacesuchas:accidents,theft,vandalism orcarjacking.It
isavehicle "blackbox"DVRsystemthatcan supportup tofourdifferentcamerasfor
simultaneousrecordingaround the vehicle.The systemuses(3)separatetriggerinputs
(Ignition,Securityand Reverse)toinitiatethe recording ofall fourcamerasand will storethe
recordingsonto(3)individual fileson aremovable SDcard.The recordingscan be reviewed on-
sitethrough an LCD monitororthe SDcardcan be removed and viewed on acomputer.
FEATURES:
•Providesaround-the-clockvideo surveillancerecording foryourvehicle
•Allows(4)differentcamerastorecordsimultaneously
•(3)Separatetriggerzones:Ignition,domelight(security)and reverselight
•Recordingscan be reviewed on-sitethrough an LCD monitororon yourhomecomputer
•UsesSDcard(32GBmax)
•Recordingsarestored in (3)separatefileson the SDcard
•Resolution:720 ×480
•Includesplug-in microphone foraudio recording inside the vehicle
•Full functioning remotetoaccessthe systemmenusand features
•Plug-in IRsensorforremote
•Recordstimeand dateofthe events
•Systemcan be integrated withanyalarmorremotestartsystem
•Compatible withanySecurViewcameraorstandardRCAcamera

2
TABLE OFCONTENTS:
Introduction 2
Pre-Installation Considerations 3
Cautions&Warnings 3
HardwareIncluded (What’sin the kit) 4
Wiring (12-Pin Harness) 5-6
Installing theDVRModule 7-8
Installing the Microphone 9
Installing the IRSensor 10
Installing the LCD Monitor (NotIncluded) 10-11
Installing the SDCard 11
Installing the Cameras (NotIncluded) 12-14
Camera&MonitorWiring 15
Installation Overview16
Using the Remote&BatteryReplacement 18
Screen Icons 19
Record&PlaybackModes 20-21
The Menus 22
SystemMenu Structure 23
Video Menu Settings 24-26
PlayMenu Settings 27-29
Setup MenuSettings 30-34
Screen Structure 35-37
Audio Recording &SDCardManagement 37
Troubleshooting 38-39
Technical Specifications 39
INTRODUCTION:
Thismanual containsthe information necessaryforinstalling and operating yourDVRsystem.If
anyquestionsarise,contactyourinstallation dealerorCrimestopperSecurityProductsInc.
Thisinstallation bookisdesigned forthe installerorindividual withan existingunderstanding of
automotiveelectrical systems,along withthe abilitytotestand connectwiresforproper
operation.Toeaseinstallation,wesuggestthatyou READ THISMANUAL beforebeginning
yourinstallation.Thisbookisprovided asa GENERALGUIDELINE and the information
contained hereinmaydifferfromyourvehicle.
DISCLAIMER:
CrimestopperSecurityProducts,Inc.and itsvendorsshall notbe liable foranyaccident
resulting fromthe useofthisproduct. Thissystemisdesigned tobe professionallyinstalledinto
avehicle inwhichall systemsand associated componentsareinperfectworking condition.

3
PR PRE-INSTALLATIONCONSIDERATIONS:
BEFOREBEGINNING,checkall vehicle manufacturercautionsand warningsregarding
electrical service(AIRBAGS,ABS BRAKES,ENGINE/BODYCOMPUTERAND BATTERY).
PLANOUTYOUR INSTALLATION.You should pre-determine the location ofthe DVRModule
(Brain),Microphone,IRSensor,Camera(s)and LCD monitor.Thiswill savetimeand easethe
installation process.Pleasemakesurethatwhen you aredetermining the mounting location of
the DVRmodule thatyou takeintoaccountthatyou will need toretrievethe SDcardatsome
point. Besuretomountthismodule in alocation thatwill makeiteasyforyou todo so.
USE VOLT/OHMMETER totestand locateall connections.During thisinstallation,you will be
testing forignition power,domelighttriggers,reverselights,etc.TestLightsorLighted Probes
could possiblydamage avehicle’scomputersystemorcausean airbag todeploy.
ADDITIONALPARTS,suchasadditional relays,wireconnectorsand zip tiesarenotincluded
withthisunit, and willbe needed foryourinstallation.
CAMERA(S) AND LCD MONITORS arenotincluded withthiskitand will need tobe purchased
separately.AnySecurView™camerasand monitorswill be compatible withyourUBB-4CQ
DVRsystem.However,you mayalsouseanyaftermarketcameraand monitorthatusea
standardRCAvideo connection. ALWAYSBENCH TEST all camerasand monitorsbefore
actuallyinstalling themintothe vehicle.
CAUTIONS&WARNINGS:
DAMAGERESULTINGFROMIMPROPERINSTALLATIONISNOTCOVERED
UNDERWARRANTY!!!
DONOTROUTEANYWIRINGTHATMAYBECOMEENTANGLED withthe brake/gaspedals,
steering column,oranyothermoving partsin the vehicle.If you areplanningon installing the
DVRmodule underone ofthe seats,pleasemakesuretoleaveslackon all wiresand cablesso
thatwhen the seatismoved backand forward,the cablesarenotoutstretched orbroken.Also,
be suretostayclearofanyairbag oroccupantsensorsand connectorsunderthe seats.
WHENINSTALLINGTHECAMERAS,BESURE todouble checkbehind the mounting
locationstomakesurethatyou will notbe drilling intoanywireharnessesorotherOEM
equipment. Ifyou areinstalling the interiorcamerason the headliner,be suretodouble check
forclearanceunderneaththe headlinersoyou willnotdrill through the outerrooforthrough any
wireharnesses,modulesorairventsin the ceiling ofthe vehicle.
DONOT routeanyvideo cablesorharnessesin frontofanycurtain airbagsorknee airbagsin
the vehicle.Doing somaycausethe airbagstofail in caseofan accidentcausing injurytothe
driverand passengers.
DONOT install the LCD monitorin alocation thatwill obstructthe driver’sview.

4
INSTALLATION
HARDWAREINCLUDED:(What’sintheKit)
NOTE: Camerasand monitoraresold separatelyfromthe system.AnySecurView™camera
and monitororanycameraand monitorthatuseastandardRCAvideo outputconnection is
compatible withthisDVRsystem.Therearespecial packagesareavailable whichwill bundle
the UBB-4.CQsystemwithup tofourcameras.
FRONTVIEW
BACK VIEW
VIDEO1VIDEO2VIDEO3VIDEO4
POWER
SDCARD
MICROPHONE LCDMONITOR
IRSENSOR
Front Camera
Dome(Inside)
Camera
ReverseCamera Front Camera
#2
•
(1)Control Module
•(1)Full functional remotewithbattery
•(1)12-pin powerconnector
•(1)8GBSDcard
•
(1)IRsensorcable
•(1)Wired microphone
•(1)Instruction manual
•(1)Warrantycard

5
INSTALLATION
WIRING:-12 Pin Connector-
Yellow:(+)12VBatteryPower
Connectthiswiretoaconstant12Vpowersourcesuchasthe batteryoranybatterysource
underthe dash(Ignition barrel powerharness orfusebox)
Red:(+)12VIgnitionInput
Thisinput will activatethevideo inputsandbegin recording when the ignition isturned on.
Connect thiswiretoan IGNITIONcircuit (orfusein the fusebox)thatshows+12 Voltswhen the
keyisin both“On”and “Start”(WHENCRANKING)positions.
Brown/White:(+)Dome LightInput
Thisinputwill activatethe video inputsand beginrecording when thedoorisopened.Connect
thiswiretothe positivedomelightcircuitin the vehicle.Thiscircuitwill show12 voltswhenthe
vehicle doorisopened and restatground when the doorisclosed.
Brown:(-)Dome LightInput
Thisinputwill activatethe videoinputsandbeginrecording when thedoorisopened.Connect
thiswiretothe negativedomelightcircuitin the vehicle.Thiscircuitwill showground when the
vehicle doorisopened and restopen when the doorisclosed.
Blue:(+)CameraPowerOutput(200mAMax,REQUIRESRELAY)
Thiswireprovidesa12V200mAoutputtopowerup the camera(s)when anyofthe three trigger
inputsofthe systemareactivated.Sincethiswireisonlya200mAmax,arelayisrequired to
powerthe 1-3camerasofthe system.Connectblue wiretoterminal #86 ofrelay.Connect
terminal #85 tochassisground.Connectterminal #87toa+12Vconstantbatterysource.
ConnectTerminal #30 tothe 1-3camerapowerinputs. (See FIGURE1)
8685
87A
3087
CHASSIS
GROUND
+12VOLTBATTERY +12 Voltcamerapower
Blue200mAPowerOutput
fromUBB-4.CQsystem
RELAY
White/Red:(+)12VReverse LightInput
Thisinputwill activatethe VIDEO4inputand begin recording when the vehicle isshifted into
reverse.Connectthiswiretothe 12Vreverselightcircuitin the vehicle.Thiscircuitwill show12
voltsonlywhen the vehicle isshifted intoreverse.
FIGURE1
CameraPowerRelay

6
INSTALLATION
WIRING:-12 Pin Connector-(Continued)
Green: NoConnection
White: NoConnection
Pink: NoConnection
Pink/White: NoConnection
Black (2x): (-) MainSystem Ground
Connectthesetwowirestothe CHASSISMETALofthe vehicle.Scrape awayanypaintor
debrisfromthe connection pointand useastarwashertoensureagood connection.Keep the
ground wireasshortaspossible.
+12 VoltBattery
+-
YELLOW
RED
+12VoltIgnition
BROWN/WHITE
(+)DomeLight
D
85
86 87
87a
30
BLUE
+12 VoltPoweroutput
forcameras
200mAmax
(Pleasesee relaydiagram)
WHITE/RED
R
+12VoltReverseLight
PINK
NoConnection
NoConnection
BLACK
ChassisGround
BLACK
ChassisGround
PINK/WHITE
WHITE
NoConnection GREEN NoConnection
BROWN
(-)DomeLight
D
NOTE: Boththe Brownand the Brown/Whitewiresdo notneed tobe hooked up atthe same
time.You mayuseone orthe otherdepending on the type ofdoorcircuityourvehicle has.
NOTE: Pleasemakesuretousearelayon the Blue wiretopowerthe cameras.Failuretodo so
will resultindamage tothe system. (See FIGURE1onpreviouspage)
FIGURE2
12-Pin Harness

7
INSTALLATION
INSTALLINGTHEMODULE:
Mountunderthe
passenger
seat
Mountunderthe
driver'sside of
the dashboard
Mountbehind
the glove
box
Make suretoinstall the DVRmoduleinan
easilyaccessiblelocation so thatyou can
retrieve the SDcardeasily
Also make surethatall video cables and
wireswill notbepinched orcaughton
anymoving partsinthe mountinglocation
FIGURE3

8
INSTALLATION
INSTALLINGTHEMODULE:(Continued)
1. Carefullychoosealocation tomountthe UBB-4.CQmain module. Keep in mind thatyou will
notonlyhavemanydifferentcablesand harnessesconnecting tothismodule butyou will
alsoneed tobe able toretrievethe SDcardeasilytoviewthe recordingsorchange outthe
SDcard.
2. Therearemanydifferentlocationstomountthe module.The primarychoiceisofcourse
underthe dashboardbutyou can alsomountthe module underthe passengerseatoreven
behind the glovebox. (SEE FIGURE3)
NOTE: If you areinstalling the module underthe dashboardorbehind the glovebox,make
suretokeep all cablesclearofmoving partssuchasthe steering column,pedalsorvents.If
installing underthe passengerseat, pleasemakesuretoleaveslack on all cablestoaccount
forthe seatmoving back and forward.Alsomakesuretostayclearofanyairbag and
occupantsensorsunderthe seat.
3. Ifinstalling on acar,you can sometimesmountthe module underneaththe reardeckinside
the trunkifthereisnotenough spaceanywhereelsein the car. (See FIGURE4) Ifyou are
installing in thetrunk,pleasemakesurethatthe microphone and IRSensorcableshave
adequatelengthtoreachup tothe frontofthe vehicle.
Mountunderthe rear
deckinside the trunk
NOTE: Onsomeoldermodel cars,thismounting location will notbe applicable becausethe
trunklidtension rodsgo acrossthe bottomofthe deckand will notleaveenough spaceto
mount. SomevehiclesmayalsohaveotherOEMequipmentinstalled inthisspacesuchasa
navigation system,subwooferorfactoryamplifier.
Again,pleasemakesuretomountthe module inalocation whereyou can easilyretrievethe SD
cardfromthe system.
FIGURE4

9
INSTALLATION
INSTALLING THEMICROPHONE:
1. The UBB-4.CQsystemcomesincluded withasmall wired microphone thatplugsintothe
unitand can be mounted inside the vehicle foraudio recording when the unitisactivated.
2. You’ll wanttoinstall the microphone in alocation whereitwill pickup anynoisesall around
the interiorofthe vehicle.Itdoesnotneed tonecessarilybe mounted in the centerofthe
headlinerbutthe higherup,the better.The bestlocationsarethe driver’sside A-Pillaror
custommounted intothe centerroofconsole. (See FIGURE5) Intheselocations,the
microphone should be able topickup anynoisesinside the vehicle when the systemis
recording.
3. The microphone comeswithasmall clip thatyou can usetolooselysurfacemountittoa
panel orawireharness.Ifyou aregoing tousethismethod,the bestplacetomountitwould
be eitheron the top ofthe A-Pillar.Ifyou havearearviewmirrorthathasmap lightsorany
electronicfunctions,then you can mostlikelyclip the microphone tothe mirror’swireharness
coming fromthe headliner.
NOTE: You can removethe clipbysliding itsideways off ofthe microphone.Thiswill allow
you tocustommountthe microphone intoapanel ifyou choosetodo so.
A-Pillar Headliner
Console
Clip microphone onto
A-pillarorcustommountit
tothe headlinerconsole NOTE:Clip can be removed
forcustommounting
NOTE: Trytoavoidmounting the microphone nexttoanyspeakersorBluetooth™devicesin
the vehicle.Thismaycausethe microphone topick up feedback and will notgiveyou proper
audiorecording.
FIGURE5

10
INSTALLATION
INSTALLINGTHEIRSENSOR:
1. The UBB-4.CQincludesasmall wired IRsensorhasplugsintothe module and ismounted
in alocation wherethe system’sremotecontrol can transmitline-of-sighttoit. Thissensoris
responsible forallowing the remotecontrol tocommunicatewiththe module and allowyou to
navigatethrough the systems menusand settings.Itisveryimportanttoplacethissensorin
alocation thatisoutofthe waybutcan easilybe seen bythe remotesIntrared eye.
2. Mountthe IRsensoreitheron the dashboardorup bythe rearviewmirrorsothatyou can
easilypointthe remoteatittooperatethe systemand access themenusand settings. (See
FIGURE6) The sensorhasdouble-side tape tomountittothe surface.
NOTE: If you do notinstall the IRsensor,the remotewill notcommunicatewiththe module
and you willnotbe able toaccess the system’smenusorchange anysettingsofthe DVR
system. The IRSensoralsohasagreen LEDtoindicatewhetherthe systemison oroff.
IRSensor
MirrorMount,
Universalor
In-Dashmonitorfor
videoplayback
INSTALLINGTHELCDMONITOR:
1. The UBB-4.CQusesastandardRCAvideo outputforconnection toamonitorforon-sight
playbackofthe recordingsand toviewthe systemmenus.AnySecurView™monitororany
aftermarketuniversal,rearviewmirrororin-dashstylemonitorsthatuseastandardRCA
video inputwill be compatible withthisDVRsystem. (See FIGURE6)
FIGURE6

11
INSTALLATION
INSTALLINGTHELCDMONITOR:(Continued)
2. Thereareseveral differenttypesofmonitorsthatcan be used withthissystem.You can use
anyrearviewmirror,universal orin-dashstyle monitorsaslong astheyhaveastandard
RCAvideo input (See FIGURE7)
3. You will need torefertothe installation instructionsofthe monitortofind outhowtoinstall
themin the vehicle butmostofthe monitorsareverysimple toinstall and will requireminimal
installationtime.Mostmonitorswill haveatleastone video inputtoconnecttothe UBB-
4.CQsystemand will requireyou toconnectpowertoa+12Vignition sourcesothatthe
monitorwill comeon when the keyison atall times.
UNIVERSAL REARVIEWMIRROR IN-DASH
NOTE: TheLCD monitoris NOTINCLUDED withthe UBB-4.CQsystemand will havetobe
purchased separately.If you aregoing tousethe UBB-4.CQsystemwithan OEMin-dash
monitorthan somespecial interfacepartswillberequired tointegratethe OEMequipmentwith
the aftermarketRCAvideo plugs.
If you do notinstall amonitorwiththe UBB-4.CQsystem,then you will notbe able toaccessthe
systemmenusand change anyofthe settings.You will alsonotbe able toviewthe recordings
onsiteand you will havetoremovethe SDcardand connectitintoaPCorApplecomputerto
viewthe recordings.It isstronglyrecommended thatyou install and connectan LCD monitor
withthisDVRsystem.
INSTALLINGTHESDCARD:
FIGURE7
The SDcardishoused in asmall opening
on the frontside ofthemain module nextto
the 12-pin powerharness. (See FIGURE8)
Insertthe SDcardintothe housing and
press downtolockitintoplace.Toretrieve
the SDcard,press downon the top side of
itand itwill spring releaseoutofthe
housing.
SD CARD HOUSING
FIGURE8

12
INSTALLATION
INSTALLING THECAMERAS:
1. The UBB-4.CQhasfourcamerainputsand can simultaneouslyrecordfromall forcameras
when the systemisactivated.The system’sfourinputsareforaFrontcamera(VIDEO1),
ReverseCamera(Video 4),SecurityorDomeLightCamera(Video 3)and alsoaVideo 2
inputfora4thgeneral purposecamera.The systemwill automaticallydetectwhen acamera
isplugged intothe specified inputand will startsimultaneouslyrecording on all cameras
when the systemisactivated eitherbythe Ignition,ReverseorSecurity(DomeLight)
triggers.
2. The forwardand reversecameraswillmounton the frontand the rearofthe vehicle like
normal camerainstallations.You can useanySecurView™cameraoranyaftermarketstyle
camerathatusesastandardRCAvideo output. (See FIGURE9)
ForwardCamera
VIDEO1 ReverseCamera VIDEO4
ForwardCamera
VIDEO1
ReverseCamera
VIDEO4
FlushMount Camera
(NotIncluded) EmbeddedMountCamera (NotIncluded)
NOTE: Using acamerathathasNormal orReverseimage selection isusuallythe bestwayto
go.Thisway,ifyou havetoinstall the camerasindifferentlocations,you can flipthe image to
makesurethatyou areviewing itcorrectlyon yourmonitorand inyourrecordings.
FIGURE9

13
INSTALLATION
INSTALLINGTHECAMERAS: (Continued)
3. TheforwardcameraRCAconnectstotheVIDEO1porton the UBB-4.CQand theReverse
cameraRCAplugsconnectstothe VIDEO4porton the UBB-4.CQ.
4. Forthe interiorcamera,you will mostlikelywanttouseacamerathatissmallerand less
noticeable.The SecurView™SV-007,SV-6828 orSV-6922.LM.II camerasareperfect
solutionssincetheyareall small buthigh-resolution cameras.However,anycamerawithan
RCAvideo outputconnection will workjustfine.
5. Mountingthe interiorcamerahigherup on the headlinerisusuallythe bestplace.The
interiorcameraconnectsintothe VIDEO3porton the UBB-4.CQsystem.The VIDEO2port
can be used asan extravideo sourceforanotherfrontcamera,soyou can placethe camera
whereveryou wanton the interiororexteriorofthe vehicle.Inthiscase,weshowitbeing
used on the interiorofthe vehicle. (See FIGURE10)
Front#2Camera
VIDEO2
InteriorCamera
VIDEO3
LipMountCamera
(Not Included)
NOTE: When installing the interiorcamera(s),trytomounttheminalocation wherethe entire
interiorofthe can be viewedbythe camera.Usuallythe bestplaceforthisisup higheron the
headlinereitherinthe frontorthe rearofthe interior.If you areusing boththe VIDEO2and
VIDEO3camerasforthe interior,then you should be able toviewall anglesofthe vehicle
interior (See FIGURE10)
FIGURE10

14
INSTALLATION
INSTALLINGTHECAMERAS: (Continued)
LICENSEPLATEMOUNT FLUSHMOUNT LIP MOUNT
EMBEDDEDMOUNT HANGINGSTYLE CUSTOMOEMSTYLE
NOTE: Thereareseveral differenttypesofSecurView™camerasavailable thatarecompatible
withthisDVRsystem. (See FIGURE11) HoweveranystandardRCAtype video outputcamera
will be compatible.Pleaserefertothe instructionsincluded withthe camerasforspecificson
howtomountthemtothe vehicle.
MostSecurView™cameraswill comewithanormal/reverseimage selection whichwill allow
you toflipthe image fromrighttoleft depending on wherethe cameraistobe mounted on the
vehicle.Thisisveryusefulforusing the samestyle ofcameratomounton the front,back,left
and rightside ofthe vehicle.
Selectmodel SecurView™cameraswillalsohaveaprogrammable parking line feature.Thisis
veryuseful when using acamerainthe frontorrearofthe vehicle.The parking linesare
distanceguidesprogrammed intothe camerasensorthatwill displaywhen the cameraison
and help the driveraccuratelyjudge the distanceon the frontofrearofthe vehicle depending on
wherethe cameraismounted.
Camerasare NOTINCLUDED withthe UBB-4.CQsystemand will havetobe purchased
separately.
FIGURE11

15
INSTALLATION
CAMERA &MONITORWIRING:
Reverse
Video
4
Video
3
Video
2
Video
1
Main
Module
Dome
(Security)
Front (Ignition)
LCD
Monitor
85
86 87
87a
30
(Pleasesee relaydiagram)
(Page 5)
Chassis
Ground
BLUE
CameraPower
Monitor
Video
12-Pin
PowerPlug
+12VIgnition
Monitor
Power
1. Connectpowerwiresfromall 4camerastothe Blue 200mApoweroutputwirefrom12 pin
powerconnectorofthe UBB-4.CQsystemusing arelay. (See FIGURE12) Thiswaywhen
the systemispowered on eitherbythe Ignition (Red)wireorthe DomeLight(Brownor
Brown/White)wiresofthe system,all 4cameraswill activateand begin recording.
NOTE: Pleasemakesuretosee the specificwiring instruction forthe camerapowerrelayon
page 5ofthismanual.Failuretoinstall the relaywill causedamage tothe DVRsystem
2. Connectthe powerwirefromthe LCD monitortoa+12Vignition source.Thiswaywhen the
ignition isturned on the monitorwill powerup and startviewing the camera(s)when the DVR
systemisactivated. (See FIGURE12)
3. Connectall ground wiresofthe camera(s)and monitortoground. (See FIGURE12)
FIGURE12

16
INSTALLATION
SYSTEMOVERVIEW:
PowerPlug
(See PowerPlug wiring diagram)
LCDMonitor
Microphone
IRSensor
Reverse
Camera
Dome(Inside)
Camera
Video 2
Camera
Front
Camera
Video
4
Video
3
Video
2
Video
1
SDCard
Main
Module
(PAGE 6)
FIGURE13 isageneral overviewofhowall ofthe hardwareplugsintothe systemoncethe
installation iscomplete.All hardwareisincluded acceptforthe camera(s)and LCD monitor
whichissold separately.The systemwill automaticallydetecthowmanycamerasareplugged
intothe systemand will displaythemaccordinglyon the monitor.
ThisDVRsystemcan alsobe integrated withanyaftermarketsecuritysystemforextra
protection.Thiswayifthe shocksensorofthe securitysystemgoesoff, the unitwill activateand
startrecording.The systemwill alsobegin recording ifan on-boardremotestartsystemis
activated and the ignition turnson.
FIGURE13

17
UBB-4.CQ
OPERATINGINSTRUCTIONS
CONGRATULATIONS on yourchoiceofaMobile DVR™Vehicle Black Boxquad DVR
systembyCrimestopperSecurityProductsInc. Thissection ofthe manual containsthe
information necessaryforoperating yourUBB-4.CQsystem.Ifanyquestionsarise,contact
yourinstallation dealerorCrimestopperSecurityProductsInc.
CRIMESTOPPERSECURITYPRODUCTS,INC.
1770S.TAPOSTREET,SIMI VALLEY,CA.93063
PHONE:[phone]
FAX:[phone]
www.crimestopper.com

18
OPERATION
USING THEREMOTE:
The UBB-4.CQsystemcan be setupbyusing the hand-held remotecontroland IRsensorthat
isincluded withthe system.The remotewill communicatewiththe systemthrough the IR
sensor.You can navigatethrough all ofthe systemmenusand change anyofthe settingsusing
the differentbuttonson the remote.The remotewill alsoallowyou toeasilyswitchthe system
backand forthbetween Recording Mode and PlaybackMode.
OK
REC/PB POWER
EXIT MENU
VEHICLEDVR
BUTTON FUNCTIONDESCRIPTION
POWER
MENU
EXIT
OK
REC/PB
Togglesystem powerOn/Off
Press toentersystem settingsmenu
Press toexitsystem settingsmenu
Insetup menu,presstoconfirm optionselection
andenteroptionsub-selectionmenu
Switchesbetweenrecordand playback mode
Insetupmenu,controlsup/downselectoperation
Innormaloperation,controlszoom-in/zoom-out
ofselectedvideoinput
Insetupmenu,controlsleft/rightselectoperation
REPLACINGTHEREMOTEBATTERY:
Lock Tab
Slidethe locktab sidewaysand then pull outwardtoremovethe batterytray.The remoteusesa
CR2025 batterytooperate.Insertthe batterybackintoplace.Thereisa+symbol on the trayto
indicatethatthe positiveside ofthe batteryfacesthatdirection.Pushthe batterytrayback into
the remoteuntil you hereitclickand lockintoplace.

19
OPERATION
SCREENICONS:
PLAYBACK MODE
RECORDINGMODE
PLAYBACK MODE
RecordingTime
RecordMode icon
Time&Date
Stamp
Video File Number
File RecordTime
PlaybackMode icon
PreviewMode icon
PlaybackControl
SDCardRead icon
Video PlaybackDirection
Video PlaybackSpeed
Video File Playback
Elapsed Time

20
OPERATION
RECORD &PLAYBACKMODES:
The UBB-4.CQsystemwill automaticallybegin recording when the ignition isturned on orthe
doorisopened.Ifthe ignition ison,the LCDmonitorwill activateand displaythe “Recording
Mode”screen.You can stop the Recording Mode and enter“PlaybackMode”atanytimeby
pressing the green REC/PB button on the remote.Ifyou wishtoexitPlaybackMode and
resumerecording,press the REC/PB button again onthe remote.
RECORDINGMODE:
When Recording Mode isactivated,the systemwill
automaticallydetecthowmanycamerasareplugged in and displaythemaccordinglyon the
LCD monitor.(Pleasesee the SCREENSTRUCTUREsection ofthismanual on page 42).All
cameraswill be activated bythe ignition circuitorthe doortriggercircuit. The reversecamera
(VIDEO4)circuitisthe onlycamerathatwill displaybyitselfwhen the vehicle isshifted into
reverse.Oncethe vehicle isshifted backintodrive,the restofthe cameraswill be displayed
again on the LCD monitor.All recordingsarestored on the system’sSDcardwiththe Timeand
Datestampand can be viewed atanytimebypressing the REC/PB button on the remote.
When the systemisactivated,itwill
automaticallyenterRecording Mode and
displayall camerason the LCD monitor.A
cameraicon will appearin the upperleft
cornerofthe screen totell you the systemis
recording.The recording interval timewill
alsobe displayed in red in the upperright
cornerofthe screen asitcountsup.The
Timeand Datewill be displayed in the lower
rightcornerofthe screen and will be saved
on eachrecorded file.Recording mode will
continue until the systemispowered down
(Ignition off ordoorclosed)orbypressing
the green REC/PB button on theremote.
InRecording Mode,you can zoomin and out
on the recordingsbypressing the ▼
buttonson the remote.Asmall distance
meterwill appearon the rightside ofthe
screen and the image will begin tozoomin
and out. The zooming effectwill alsobe
saved tothe recording and stored on the SD
cardsowhen you arereviewing the
recordings,you will be able tosee the
zooming effect.
NOTE: The zooming effectwill be resetonce
the systemispowered down(Ignition off or
doorcircuitopened and closed)
RECORD MODESCREEN
ZOOMINGFEATURE