Mobile MB-TVB3265 Assembly instructions

Broca 10mm
Φ10mm
Lápiz
Taladro Eiéctrico
Nivel de Burbuja
1
2
3
4
50KG
SOPORTE PARA TV
MB-TVB3265
F
ED
G
H
D
Ø16XØ6X1.5mm 4PCS
E
FM6X25mm 4PCS
M5X25mm 4PCS
Ø10XØ8X10mm 4PCS
GM6X16mm 2PCS
HM6 2PCS
ABC
A
B
C
Ø10X50mm 4PCS
M6X45mm 4PCS
Ø16XØ6X1.5mm 4PCS
I
●}
IM5*35mm 2PCS
32"- 65"
de responsabilidad.
daño o daño causado por la instalación que no cumpla con los requisitos
9.El fabricante declara por la presente que no es responsable de ningún
pared causada por carga accidental o descargada.
8.El fabricante no ser á responsable de los da ños a la vertical.
propósitos.El fabricante no se hace responsable de usos inadecuados.
7.Este producto solo se puede usar para esta función, no lo use para otros
accesorios tres veces más.
producto debe soportar el peso combinado del televisor, el soporte y los
6.Por razones de seguridad, conrme que la pared donde va a instalar el
paredes macizas.
5.Este producto se utiliza en columnas de paredes de madera maciza o
y puede soportar hasta un máximo de 50 kg.
4.Este producto es adecuado para pantallas de plasma / LCD de 32 "- 65"
Póngase en contacto con el establecimiento donde lo ha comprado.
3.Si el producto esta defectuoso o faltan accesorios, no lo instale.
2.Si no entiende, comuníquese con un instalador local calicado.
1.El producto debe ser instalado por profesionales.
Lea este manual de instalación detenidamente antes de la instalación.
También puede dañar al aparato o su TV con un montaje inadecuado.
El montaje o la instalación inadecuados pueden provocar lesiones.
Responsabilidad:
CONSEJOS

1
2
3
4
50KG
SOPORTE PARA TV
MB-TVB3265
TIPS
Bubble Level Electrc Drill Drill
Pencil Φ10mm
1. Stick a pencil in the wall According to the
product installation board installation Draw points
on the holes and drill them into place Hole.
F
ED
G
H
3.1lock the carriage screw(G)and knob (H) on the movable
hook
3.2 x the movable hook on the TV set with screw (F)
through the gasket (E) Depends on what you need adding
the spacer (D)
D
Ø16XØ6X1.5mm 4PCS
E
FM6X25mm 4PCS
M5X25mm 4PCS
Ø10XØ8X10mm 4PCS
GM6X16mm 2PCS
HM6 2PCS
ABC
2.Put the expansion pipe (A) into the installation hole of the
wall. Self-tapping screws (B) Fix the product mounting plate
to the wall through the gasket (C)
A
B
C
Ø10X50mm 4PCS
M6X45mm 4PCS
Ø16XØ6X1.5mm 4PCS
I
●}
4.1 Install the TV set with the xed
movable hook on the wall Loading
on board
4.2 Lock the safety screw (I) and turn
the knob Release and adjust the
viewing Angle to nish the locking
knob To install
IM5*35mm 2PCS
32"- 65"
responsibility.
damage caused by the installation not in accordance with the requirements
9. The manufacturer hereby declares that it is not liable for any damage or
caused by unloaded or accidental load.
8. The manufacturer shall not be responsible for the damage to the vertical wall
other purposes.
7. This product can only be used for display in this range, please do not use for
during installation, please stop the installation.
three times as much.If the expansion tube on the wall is found to be loose
should bear the combined weight of the TV set, bracket and accessories
6. For safety reasons, please conrm that the wall of the installation product
. This product is used on solid wood wall column or solid wall.5
50kg/110lbs.
. This product is suitable for 32"- 65" LCD/plasma screen, and can bear4
Please contact the local dealer get help.
. lf the product is abnormal or missing,please do not assemble or install it. 3
. lf you do not understand, please contact a qualied local installer.2
. The product must be installed by professionals.1
installation Information.
destruction of property.Please read this installation manual carefully before
Disclaimer:improper assembly or installation may result in injury or death,