Installation Instructions
Weight Capacity : 135Kg
CAUTION
Lifetime Limited
Warranty
Remove product from carton and read directions
carefully before installing raised toilet seat.
Remove toilet seat from toilet.
Turn both locking clamps counter - clockwise until
they can no longer turn. This will open the locking
devices.
Place raised toilet seat onto the bowl and position
in a secure fashion . Be sure the two locking brack-
ets are on both sides of the bowl wall and that the
seat is flush to the bowl.
Turn the locking brackets clockwise until tight.
Hand tighten only . Do not use tools as threads on
adjustment bracket may strip.
Check for secure fit routinely before using product.
User's weight should be centered over toilet seat.
1.
2.
3.
4.
5.
6.
Your Mobilita branded product is warrantied to be free
of defects in materials and workmanship for the lifetime
of the product for the original consumer purchaser.
This device was built to exacting standards and carefully
inspected prior to shipment. This Lifetime Limited
Warranty is an expression of our confidence in the
materials and workmanship of our products and our
assurance to the consumer of years of dependable
service.
This warranty does not cover device failure due to owner
misuse or negligence, or normal wear and tear. The
warranty does not extend to non-durable components,
such as rubber accessories, casters, and grips, which are
subject to normal wear and need periodic replacement.
If you have a question about your Mobilita device or this
warranty, please contact an authorized Mobilita dealer.
© 2017 Eternity Distribution Pvt. Ltd. All rights reserved
Mobilita is a trademark of
Eternity Distribution Pvt. Ltd.
Chennai, Tamil Nadu, India | Made in China for Mobilita
Cleaning Instructions
Use a non - abrasive detergent or household
cleaner with warm water.
Rinse with warm water and wipe dry.
DO NOT USE AN ABRASIVE CLEANER OR CLOTH
with this product, as damage may occur.
1.
2.
3.
Always be sure that the seat is correctly and securely
locked in place before using.
Be sure that adjustment knobs on sides of seat are tight.
This product is designed for use with most common types
of toilets. It will not fit all toilet types; be sure that the unit
is correctly installed, fits properly and is stable before use.
1.
2.
3.
Rotate knobs counter - clockwise until seat is loose.
Lift front of raised toilet and pull forward to move.
1.
2.
Removal instructions
