Mobility Sound BTH-300-R5 User manual

1
<Product Descriptions>
•Bluetooth earphone with PTT for walkie talkie
ICOM,Kenwood,BT dongles
•Built in PTT function button and Volu e
control button
•E bedded 3.5 jack is co patible with
iPhone earphone and any other earphones.
•Long talk ti e, up to 10 hours.
<Specification>
Di ension: 65 X 30 X 12
Te p: -10℃±2℃ ~ 50℃±2℃
Approx. Weight: 21.6g (External earphone is
excluded)
• Fully Qualified Bluetooth v4.1.
• Echo cancellation, noise reduction and
extended features
• High Quality DAC
• 80MHz RISC MCU and 80MIPS Kali ba DSP
• SBC, MP3, AAC, Fast strea , APTX codec
support
• RoHS co pliant
• HFP profile supports
• PTT function: built-in
• Talking Range: Bluetooth class 2, 10 eters
• Display LED: Blue and Red
• Power: Max 4dB
• Sensitivity: -90dB
• DC Input: 5 Vdc (std.)
• Standby Current: 6 A
• Battery: 190 AH
• Standby Ti e: 50 hours
• Talk Ti e: 10 Hours
BTH-300-R5

2
4.LED
5.Connection Key

3
How to use
PIO state state ent
Power S/W long held( >= 1sec) Device on
Power S/W long held( >= 2.5sec) Device off
Power S/W long press >6sec Enter pairing ode fro power off
Connection key short press Connection (Kenwood only)
VOL+ short press Volu e up
VOL+ long held( >=0.8sec) Volu e up continuously
VOL- short press Volu e down
VOL- long held( >=0.8sec) Volu e down continuously
BTH-300-R State and LED Flashing Pattern
LED state state ent
Blue led on : 2 sec , off : 1 sec , repeat All profiles are standby but not connected with
any Cellphone device yet.
Blue led flash every 2 sec HFP is connected.
Blue led and red led flash alternative repeat Enter pairing ode.
Red led On Battery Charging
Red led Off Battery Full

4
BTH-300 External Audio Accessory (Optional)
300-EP31
300-EP51
300-EP65
300-EP66
300-EP67

5
Pair BTH-300-R5 with radios
1. Make sure BTH-300 is OFF, and press power switch and hold for 6 seconds
2. BTH-300 is under pairing ode when you see RED/BLUE led flashing.
3. Start Bluetooth function on your s art phone.
4. After you hearing connect sound, press Connection Key button once.(Kenwood only)
5. Pairing process is co pleted.
NOTE
The BTH-300-R5 only for one radio. When you paired with new radio the old one will
be erased.