Mocka Felix User manual

Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
WARNING
The parts of the play gym in their unassembledstate
contain potentially hazardous small parts and
should be assembled by an adult.
Felix Wooden Playgym
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
screw
x2
AB
screw
x4

12
To begin, lay out the panels as shown. Attach panel [3] to panels [1] and [2] using 2x screws (B). Tighten with a
screwdriver. Repeat for the other side of the gym.
1
2
1
2
3
3
4
3
1
2
Felix Wooden Playgym
2
mocka.co.nz | mocka.com.au
Assembly Instructions
B
B
B

34
Attach one side (panels [1] and [2]) to one end of panel [4] using 1x
screw (A). Tighten with a screwdriver. Slide three toys along panel [4].
Attach the other side (panels [1] and [2]) to the other end of panel [4].
Tighten with a screwdriver. You’re done, enjoy!
1
2
4
A
x3
2
1
A
1
2
4
Felix Wooden Playgym
3
mocka.co.nz | mocka.com.au
Assembly Instructions