Mocka Piccolo Teepee User manual

B
A
x4
CD
x1
plastic tube Cotton String
(100cm)
wood pole
(top)
wood pole
(bottom)
x4 x4
Hardware Supplied
WARNING: KEEP AWAY FROM FIRE/FLAME
ASSEMBLY OF THIS ITEM SHOULD BE PREFORMED BY AN ADULT ONLY
Piccolo Teepee
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
To begin assembly, connect wooden poles (B) and (C) together with
the plastic tube (A) as shown. Repeat until all four poles are
assembled.
Insert four complete poles, one at a time, into the side channels on the
inside of the teepee canvas. Ensure the wooden poles (B) with hole are
at the top. Slide each pole right to the base of the canvas channel.
A
x4
1
C
x4
A
B
C
C
.
Piccolo Teepee
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
To begin assembly, connect wooden poles (B) and (C) together with
the plastic tube (A) as shown. Repeat until all four poles are
assembled.
Insert four complete poles, one at a time, into the side channels on the
inside of the teepee canvas. Ensure the wooden poles (B) with hole are
at the top. Slide each pole right to the base of the canvas channel.
A
x4
1
C
x4
A
B
C
C
.
34
Attach wood poles and teepee canvas together using the cotton string
(D). Lie the teepee flat and bunch the ends together. Thread the string
through the eyelets in the canvas and then through the pole, alternating
each time (keeping all poles bunched together).
All done! Ensure all teepee poles are fully extended and the fabric in
each section is taught. The fabric should not sag between poles if all
poles are fully extended. Enjoy!
x1
Knot
D
1
D
x1
Piccolo Teepee
3
mocka.co.nz | mocka.com.au
Assembly Instructions