Mocka Henley Teepees User manual

Hardware Supplied
EMALF/ERIF MORF YAWA PEEK :GNINRAW
ASSEMBLY OF THIS ITEM SHOULD BE PREFORMED BY AN ADULT ONLY
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Henley & Spots Teepees
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

Henley & Spots Teepees
12
To begin assembly, connect wooden poles (B) and (C) together with
the plastic tube (A) as shown. Repeat until all four poles are
assembled.
Insert four complete poles, one at a time, into the side channels on the
inside of the teepee canvas. Ensure the wooden poles (B) with hole are
at the top. Slide each pole right to the base of the canvas channel.
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

34
All done! Ensure all teepee poles are fully extended and the fabric in
each section is taught. The fabric should not sag between poles if all
poles are fully extended. Enjoy!
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Henley & Spots Teepees
Attach wood poles together using the cotton string at the top of the
canvas. Lie the teepee flat and bunch the ends together. Thread the
string through the holes in the pole, alternating each time (keeping all
poles bunched together). Tie the ends of the string together securely.